[Libva] va_getDriverName() returns -1

[Anteja Vuk Macek]

Hi,

Thanks Siew  for this steps, I try but error is same...
Is libva need x-server ?

Best regards,

Anteja


On Wed, Oct 12, 2016 at 9:36 AM, Lim, Siew Hoon <siew.hoon.lim at intel.com>
wrote:

> Hi Anteja,
>
>
>
> The i965_drv_video.so may needs to be linked as emgd_drv_video.so  by the
> following step:
>
> Step 1: cd /usr/lib/dri
>
> Step 2: ln –sfv i965_drv_video.so emgd_drv_video.so
>
>
>
> You can give a try on the step above.
>
>
>
> Thank you.
>
> ….siewhoon
>
>
>
> *From:* Libva [mailto:libva-bounces at lists.freedesktop.org] *On Behalf Of *Anteja
> Vuk Macek
> *Sent:* Wednesday, October 12, 2016 2:18 PM
> *To:* Xiang, Haihao
> *Cc:* libva at lists.freedesktop.org
> *Subject:* Re: [Libva] va_getDriverName() returns -1
>
>
>
> Hi,
>
>
>
> What I should I do to fix libva error ?
>
>
> Best regards,
>
> Anteja Vuk - Macek
>
> Software Engineer
>
>
>
> Dolotron d.o.o.
>
> Ziskovec 141
>
> HR-40000 Cakovec
>
> Croatia
>
> Tel: ++385 (40) 865 205
>
> Fax: ++385 (40) 865 732
>
> mailto: anteja.vm at dolotron.com
>
> _________________________________
>
>
>
> On Wed, Oct 12, 2016 at 2:48 AM, Xiang, Haihao <haihao.xiang at intel.com>
> wrote:
>
>
> I don't think libva-intel-driver can work with emgd. You should install
> emgd backend vaapi driver:
> http://edc.intel.com/Software/Downloads/EMGD/
>
> I never tried emgd before, I'm sorry that I cannot provide more help
> to you on this.
>
> Thanks
> Haihao
>
> > Hi,
> > But I install emgd driver 39.00, but i have problem with loading this
> > module, you can see photo https://my.syncplicity.com/share/skvhanon0s
> > xj5f8/IMG_20161011_104347 ;.
>
> >
> > Best regards,
> >
> > Anteja
> >
> > >
> > > On Tue, Oct 11, 2016 at 11:00 AM, Anteja Vuk Macek <anteja.vm at dolot
> <anteja.vm at dolot%0b>> > ron.com> wrote:
> > > > Hi,
> > > > I check if i915 is loaded, but i don't have similar message  ...
> > > >
> > > > only that ...
> > > >
> > > > [    3.529333] [drm] Initialized drm 1.1.0 20060810
> > > >
> > > > Best regards,
> > > >
> > > > Anteja
> > > >
> > > >
> > > > On Tue, Oct 11, 2016 at 10:53 AM, Xiang, Haihao <haihao.xiang at int
> <haihao.xiang at int%0b>> > > el.com> wrote:
> > > > >
> > > > > Please check i915  is loaded or not.
> > > > >
> > > > > $>  dmeg | grep i915
> > > > >
> > > > > If i915 is loaded, you can see similar message below:
> > > > >
> > > > > [   10.943138] [drm] Initialized i915 1.6.0 20160919 for
> > > > > 0000:00:02.0 on minor 0
> > > > >
> > > > >
> > > > > Thanks
> > > > > Haihao
> > > > >
> > > > >
> > > > > > Hi
> > > > > > >Could you post the output of 'lspci -nn'? I assumed you are
> > > > > > using Intel Graphics.
> > > > > >
> > > > > > Yes I use intel graphic.  In attachment is output.txt ...
> > > > > > I don't have that  /dev/dri/card0 ...
> > > > > >
> > > > > >
> > > > > >
> > > > > > Best regards,
> > > > > >
> > > > > > Anteja
> > > > > >
> > > > > >
> > > > > > On Tue, Oct 11, 2016 at 8:17 AM, Xiang, Haihao <haihao.xiang@
> <haihao.xiang@%0b>> > > > > intel.com> wrote:
> > > > > > >
> > > > > > > Could you post the output of 'lspci -nn'? I assumed you are
> > > > > > > using Intel Graphics.
> > > > > > >
> > > > > > > You can try to  run vainfo without Xserver and Wayland.  If
> > > > > > > you still get error, you should
> > > > > > > check the following first:
> > > > > > > 1> is there /dev/dri/card0. If not,  it means your GPU is
> > > > > > > not supported by drm/i915.
> > > > > > > 2> do you have permission to access /dev/dri/card0? Please
> > > > > > > change the mode first if you haven't permission to access
> > > > > > > /dev/dri/card0.
> > > > > > >
> > > > > > > Thanks
> > > > > > > Haihao
> > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > I work with Fedora 18 ( KDE 32 bit ) ... I configure and
> > > > > > > > install libva-1.5.0 on Fedora, use command vainfo and got
> > > > > > > > error.
> > > > > > > >
> > > > > > > > [root at localhost intel-driver]# vainfo
> > > > > > > > libva info: VA-API version 0.37.0
> > > > > > > > libva info: va_getDriverName() returns -1
> > > > > > > > libva error: va_getDriverName() failed with unknown libva
> > > > > > > > error,driver_name=(null)
> > > > > > > > vaInitialize failed with error code -1 (unknown libva
> > > > > > > > error),exit
> > > > > > > >
> > > > > > > > I install before  :
> > > > > > > > inputproto-2.3.1
> > > > > > > > xorg-x11-drv-evdev-2.7.3-5
> > > > > > > > libdrm-2.4.52
> > > > > > > > mesa-10.2.1
> > > > > > > > glu-9.0.0
> > > > > > > > Also after installing libva I install intel-VA-driver-
> > > > > > > > 1.5.0  ( git clone
> > > > > > > > git://anongit.freedesktop.org/vaapi/intel-driver )
> > > > > > > >
> > > > > > > > Configuration for libva and intel-VA-driver
> > > > > > > > #./autogen.sh --prefix=/usr--enable -wayland
> > > > > > > >
> > > > > > > > Could somebody tell what I need to do for fix this error
> > > > > > > > ?
> > > > > > > >
> > > > > > > > Best regards,
> > > > > > > >
> > > > > > > > TejaVM
> > > > > > > > _______________________________________________
> > > > > > > > Libva mailing list
> > > > > > > > Libva at lists.freedesktop.org
> > > > > > > > https://lists.freedesktop.org/mailman/listinfo/libva
> > > >
> > >
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libva/attachments/20161012/61a6fa81/attachment.html>