[Mesa-dev] [PATCH] dri: Rework planar image interface v2

Jakob Bornecrantz jakob at vmware.com
Sat Aug 25 11:50:08 PDT 2012


As discussed with Kristian on #wayland. Pushes the decision of components
into the dri driver giving it greater freedom to allow t to implement YUV
samplers in hardware, and which mode to use.

This interface will also allow drivers like SVGA to implement YUV surfaces
without the need to sub-allocate and instead send 3 seperate buffers
for each channel, currently not implemented.

This is only the dri interface and gallium dri state tracker parts of the
changes needed to make this change work, I haven't done the intel parts
of them and I'll do these tomorrow or monday, I wanted to get the dri-
interface changes out as fast as possible for review.

I have tested these changes on SVGA with the previus patch series I sent
out (mines the last one), and everything seem to work just as before.

Cheers, Jakob.

v2: Fix typo in dri2_from_planar.

Signed-off-by: Jakob Bornecrantz <jakob at vmware.com>
---
 include/GL/internal/dri_interface.h                |   67 +++++++++-
 src/egl/drivers/dri2/egl_dri2.c                    |  128 ++++++--------------
 src/gallium/state_trackers/dri/common/dri_screen.h |    1 +
 src/gallium/state_trackers/dri/drm/dri2.c          |   82 ++++++++++++-
 src/gbm/backends/dri/gbm_dri.c                     |   33 ++---
 5 files changed, 196 insertions(+), 115 deletions(-)

diff --git a/include/GL/internal/dri_interface.h b/include/GL/internal/dri_interface.h
index 09f63ff..1e0f1d0 100644
--- a/include/GL/internal/dri_interface.h
+++ b/include/GL/internal/dri_interface.h
@@ -923,6 +923,10 @@ struct __DRIdri2ExtensionRec {
  * __DRI_IMAGE_FORMAT_NONE is for images that aren't directly usable
  * by the driver (YUV planar formats) but serve as a base image for
  * creating sub-images for the different planes within the image.
+ *
+ * R8, GR88 and NONE should not be used with createImageFormName or
+ * createImage, and are returned by query from sub images created with
+ * createImageFromNames (NONE, see above) and fromPlane (R8 & GR88).
  */
 #define __DRI_IMAGE_FORMAT_RGB565       0x1001
 #define __DRI_IMAGE_FORMAT_XRGB8888     0x1002
@@ -937,6 +941,49 @@ struct __DRIdri2ExtensionRec {
 #define __DRI_IMAGE_USE_SCANOUT		0x0002
 #define __DRI_IMAGE_USE_CURSOR		0x0004 /* Depricated */
 
+
+/**
+ * Four CC formats that matches with WL_DRM_FORMAT_* from wayland_drm.h
+ * and GBM_FORMAT_* from gbm.h, used with createImageFromNames.
+ *
+ * \since 5
+ */
+
+#define __DRI_IMAGE_FOURCC_RGB565	0x36314752
+#define __DRI_IMAGE_FOURCC_ARGB8888	0x34325241
+#define __DRI_IMAGE_FOURCC_XRGB8888	0x34325258
+#define __DRI_IMAGE_FOURCC_ABGR8888	0x34324241
+#define __DRI_IMAGE_FOURCC_XBGR8888	0x34324258
+#define __DRI_IMAGE_FOURCC_YUV410	0x39565559
+#define __DRI_IMAGE_FOURCC_YUV411	0x31315559
+#define __DRI_IMAGE_FOURCC_YUV420	0x32315559
+#define __DRI_IMAGE_FOURCC_YUV422	0x36315559
+#define __DRI_IMAGE_FOURCC_YUV444	0x34325559
+#define __DRI_IMAGE_FOURCC_NV12		0x3231564e
+#define __DRI_IMAGE_FOURCC_NV16		0x3631564e
+#define __DRI_IMAGE_FOURCC_YUYV		0x56595559
+
+
+/**
+ * Queryable on images created by createImageFromNames.
+ *
+ * RGB and RGBA are may be usable directly as images but its still
+ * recommended to call fromPlanar with plane == 0.
+ *
+ * Y_U_V, Y_UV and Y_XUXV all requires call to fromPlanar to create
+ * usable sub-images, sampling from images return raw YUV data and
+ * color conversion needs to be done in the shader.
+ *
+ * \since 5
+ */
+
+#define __DRI_IMAGE_COMPONENTS_RGB	0x3001
+#define __DRI_IMAGE_COMPONENTS_RGBA	0x3002
+#define __DRI_IMAGE_COMPONENTS_Y_U_V	0x3003
+#define __DRI_IMAGE_COMPONENTS_Y_UV	0x3004
+#define __DRI_IMAGE_COMPONENTS_Y_XUXV	0x3005
+
+
 /**
  * queryImage attributes
  */
@@ -947,6 +994,7 @@ struct __DRIdri2ExtensionRec {
 #define __DRI_IMAGE_ATTRIB_FORMAT	0x2003 /* available in versions 3+ */
 #define __DRI_IMAGE_ATTRIB_WIDTH	0x2004 /* available in versions 4+ */
 #define __DRI_IMAGE_ATTRIB_HEIGHT	0x2005
+#define __DRI_IMAGE_ATTRIB_COMPONENTS	0x2006 /* available in versions 5+ */
 
 typedef struct __DRIimageRec          __DRIimage;
 typedef struct __DRIimageExtensionRec __DRIimageExtension;
@@ -984,6 +1032,19 @@ struct __DRIimageExtensionRec {
    GLboolean (*validateUsage)(__DRIimage *image, unsigned int use);
 
    /**
+    * Unlike createImageFromName __DRI_IMAGE_FORMAT is not but instead
+    * __DRI_IMAGE_FOURCC and strides are in bytes not pixels. Stride is
+    * also per block and not per pixel (for non-RGB, see gallium blocks).
+    *
+    * \since 5
+    */
+   __DRIimage *(*createImageFromNames)(__DRIscreen *screen,
+                                       int width, int height, int fourcc,
+                                       int *names, int num_names,
+                                       int *strides, int *offsets,
+                                       void *loaderPrivate);
+
+   /**
     * Create an image out of a sub-region of a parent image.  This
     * entry point lets us create individual __DRIimages for different
     * planes in a planar buffer (typically yuv), for example.  While a
@@ -998,10 +1059,8 @@ struct __DRIimageExtensionRec {
     *
     * \since 5
     */
-    __DRIimage *(*createSubImage)(__DRIimage *image,
-                                  int width, int height, int format,
-                                  int offset, int pitch,
-                                  void *loaderPrivate);
+    __DRIimage *(*fromPlanar)(__DRIimage *image, int plane,
+                              void *loaderPrivate);
 };
 
 
diff --git a/src/egl/drivers/dri2/egl_dri2.c b/src/egl/drivers/dri2/egl_dri2.c
index 7326b85..f2cce74 100644
--- a/src/egl/drivers/dri2/egl_dri2.c
+++ b/src/egl/drivers/dri2/egl_dri2.c
@@ -1093,68 +1093,16 @@ dri2_create_image_mesa_drm_buffer(_EGLDisplay *disp, _EGLContext *ctx,
  * wl_drm format code to a description of the planes in the buffer
  * that lets us create a __DRIimage for each of the planes. */
 
-static const struct wl_drm_format_descriptor {
-   uint32_t wl_format;
+static const struct wl_drm_components_descriptor {
+   uint32_t dri_components;
    EGLint components;
    int nplanes;
-   struct {
-      int buffer_index;
-      int width_shift;
-      int height_shift;
-      uint32_t dri_format;
-      int cpp;
-   } planes[3];
-} wl_drm_formats[] = {
-   { WL_DRM_FORMAT_ARGB8888, EGL_TEXTURE_RGBA, 1,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_ARGB8888, 4 }, } },
-
-   { WL_DRM_FORMAT_XRGB8888, EGL_TEXTURE_RGB, 1,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_XRGB8888, 4 }, } },
-
-   { WL_DRM_FORMAT_YUV410, EGL_TEXTURE_Y_U_V_WL, 3,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 1, 2, 2, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 2, 2, 2, __DRI_IMAGE_FORMAT_R8, 1 } } },
-
-   { WL_DRM_FORMAT_YUV411, EGL_TEXTURE_Y_U_V_WL, 3,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 1, 2, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 2, 2, 0, __DRI_IMAGE_FORMAT_R8, 1 } } },
-
-   { WL_DRM_FORMAT_YUV420, EGL_TEXTURE_Y_U_V_WL, 3,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 1, 1, 1, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 2, 1, 1, __DRI_IMAGE_FORMAT_R8, 1 } } },
-
-   { WL_DRM_FORMAT_YUV422, EGL_TEXTURE_Y_U_V_WL, 3,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 1, 1, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 2, 1, 0, __DRI_IMAGE_FORMAT_R8, 1 } } },
-
-   { WL_DRM_FORMAT_YUV444, EGL_TEXTURE_Y_U_V_WL, 3,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 1, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 2, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 } } },
-
-   { WL_DRM_FORMAT_NV12, EGL_TEXTURE_Y_UV_WL, 2,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 1, 1, 1, __DRI_IMAGE_FORMAT_GR88, 2 } } },
-
-   { WL_DRM_FORMAT_NV16, EGL_TEXTURE_Y_UV_WL, 2,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
-       { 1, 1, 0, __DRI_IMAGE_FORMAT_GR88, 2 } } },
-
-   /* For YUYV buffers, we set up two overlapping DRI images and treat
-    * them as planar buffers in the compositors.  Plane 0 is GR88 and
-    * samples YU or YV pairs and places Y into the R component, while
-    * plane 1 is ARGB and samples YUYV clusters and places pairs and
-    * places U into the G component and V into A.  This lets the
-    * texture sampler interpolate the Y components correctly when
-    * sampling from plane 0, and interpolate U and V correctly when
-    * sampling from plane 1. */
-   { WL_DRM_FORMAT_YUYV, EGL_TEXTURE_Y_XUXV_WL, 2,
-     { { 0, 0, 0, __DRI_IMAGE_FORMAT_GR88, 2 },
-       { 0, 1, 0, __DRI_IMAGE_FORMAT_ARGB8888, 4 } } }
+} wl_drm_components[] = {
+   { __DRI_IMAGE_COMPONENTS_RGB, EGL_TEXTURE_RGB, 1 },
+   { __DRI_IMAGE_COMPONENTS_RGBA, EGL_TEXTURE_RGBA, 1 },
+   { __DRI_IMAGE_COMPONENTS_Y_U_V, EGL_TEXTURE_Y_U_V_WL, 3 },
+   { __DRI_IMAGE_COMPONENTS_Y_UV, EGL_TEXTURE_Y_UV_WL, 2 },
+   { __DRI_IMAGE_COMPONENTS_Y_XUXV, EGL_TEXTURE_Y_XUXV_WL, 2 },
 };
 
 static _EGLImage *
@@ -1164,13 +1112,11 @@ dri2_create_image_wayland_wl_buffer(_EGLDisplay *disp, _EGLContext *ctx,
 {
    struct wl_drm_buffer *buffer = (struct wl_drm_buffer *) _buffer;
    struct dri2_egl_display *dri2_dpy = dri2_egl_display(disp);
+   const struct wl_drm_components_descriptor *f;
    __DRIimage *dri_image;
    _EGLImageAttribs attrs;
    EGLint err;
-   uint32_t format;
-   int32_t offset, stride, plane, width, height;
-   int cpp, index;
-   const struct wl_drm_format_descriptor *f;
+   int32_t plane;
 
    if (!wayland_buffer_is_drm(&buffer->buffer))
        return NULL;
@@ -1189,17 +1135,12 @@ dri2_create_image_wayland_wl_buffer(_EGLDisplay *disp, _EGLContext *ctx,
       return NULL;
    }
 
-   width = buffer->buffer.width >> f->planes[plane].width_shift;
-   height = buffer->buffer.height >> f->planes[plane].height_shift;
-   format = f->planes[plane].dri_format;
-   cpp = f->planes[plane].cpp;
-   index = f->planes[plane].buffer_index;
-   offset = buffer->offset[index];
-   stride = buffer->stride[index];
+   dri_image = dri2_dpy->image->fromPlanar(buffer->driver_buffer, plane, NULL);
 
-   dri_image = dri2_dpy->image->createSubImage(buffer->driver_buffer,
-                                               width, height, format,
-                                               offset, stride / cpp, NULL);
+   if (dri_image == NULL) {
+      _eglError(EGL_BAD_PARAMETER, "dri2_create_image_wayland_wl_buffer");
+      return NULL;
+   }
 
    return dri2_create_image(disp, dri_image);
 }
@@ -1360,24 +1301,31 @@ dri2_wl_reference_buffer(void *user_data, uint32_t name,
 {
    _EGLDisplay *disp = user_data;
    struct dri2_egl_display *dri2_dpy = dri2_egl_display(disp);
-   int i;
+   __DRIimage *img;
+   int i, dri_components = 0;
+
+   img = dri2_dpy->image->createImageFromNames(dri2_dpy->dri_screen,
+                                               buffer->buffer.width,
+                                               buffer->buffer.height,
+                                               buffer->format, (int*)&name, 1,
+                                               buffer->stride,
+                                               buffer->offset,
+                                               NULL);
+
+   if (img == NULL)
+      return;
 
-   for (i = 0; i < ARRAY_SIZE(wl_drm_formats); i++)
-      if (wl_drm_formats[i].wl_format == buffer->format) {
-         buffer->driver_format = &wl_drm_formats[i];
-         break;
-      }
+   dri2_dpy->image->queryImage(img, __DRI_IMAGE_ATTRIB_COMPONENTS, &dri_components);
 
-   if (buffer->driver_format == NULL)
-      return;
+   buffer->driver_format = NULL;
+   for (i = 0; i < ARRAY_SIZE(wl_drm_components); i++)
+      if (wl_drm_components[i].dri_components == dri_components)
+         buffer->driver_format = &wl_drm_components[i];
 
-   buffer->driver_buffer =
-      dri2_dpy->image->createImageFromName(dri2_dpy->dri_screen,
-                                           buffer->buffer.width,
-                                           buffer->buffer.height, 
-                                           __DRI_IMAGE_FORMAT_NONE, name,
-                                           buffer->stride[0] / 4,
-                                           NULL);
+   if (buffer->driver_format == NULL)
+      dri2_dpy->image->destroyImage(img);
+   else
+      buffer->driver_buffer = img;
 }
 
 static void
@@ -1442,7 +1390,7 @@ dri2_query_wayland_buffer_wl(_EGLDriver *drv, _EGLDisplay *disp,
                              EGLint attribute, EGLint *value)
 {
    struct wl_drm_buffer *buffer = (struct wl_drm_buffer *) _buffer;
-   const struct wl_drm_format_descriptor *format;
+   const struct wl_drm_components_descriptor *format;
 
    if (!wayland_buffer_is_drm(&buffer->buffer))
       return EGL_FALSE;
diff --git a/src/gallium/state_trackers/dri/common/dri_screen.h b/src/gallium/state_trackers/dri/common/dri_screen.h
index 2818e9c..ff48b02 100644
--- a/src/gallium/state_trackers/dri/common/dri_screen.h
+++ b/src/gallium/state_trackers/dri/common/dri_screen.h
@@ -86,6 +86,7 @@ struct __DRIimageRec {
    unsigned level;
    unsigned layer;
    uint32_t dri_format;
+   uint32_t dri_components;
 
    void *loader_private;
 };
diff --git a/src/gallium/state_trackers/dri/drm/dri2.c b/src/gallium/state_trackers/dri/drm/dri2.c
index d7f4dd6..2f83dab 100644
--- a/src/gallium/state_trackers/dri/drm/dri2.c
+++ b/src/gallium/state_trackers/dri/drm/dri2.c
@@ -574,6 +574,7 @@ dri2_create_image(__DRIscreen *_screen,
    img->level = 0;
    img->layer = 0;
    img->dri_format = format;
+   img->dri_components = 0;
 
    img->loader_private = loaderPrivate;
    return img;
@@ -612,6 +613,11 @@ dri2_query_image(__DRIimage *image, int attrib, int *value)
    case __DRI_IMAGE_ATTRIB_HEIGHT:
       *value = image->texture->height0;
       return GL_TRUE;
+   case __DRI_IMAGE_ATTRIB_COMPONENTS:
+      if (image->dri_components == 0)
+         return GL_FALSE;
+      *value = image->dri_components;
+      return GL_TRUE;
    default:
       return GL_FALSE;
    }
@@ -630,6 +636,8 @@ dri2_dup_image(__DRIimage *image, void *loaderPrivate)
    pipe_resource_reference(&img->texture, image->texture);
    img->level = image->level;
    img->layer = image->layer;
+   /* This should be 0 for sub images, but dup is also used for base images. */
+   img->dri_components = image->dri_components;
    img->loader_private = loaderPrivate;
 
    return img;
@@ -649,6 +657,76 @@ dri2_validate_usage(__DRIimage *image, unsigned int use)
       return GL_FALSE;
 }
 
+static __DRIimage *
+dri2_from_names(__DRIscreen *screen, int width, int height, int format,
+                int *names, int num_names, int *strides, int *offsets,
+                void *loaderPrivate)
+{
+   __DRIimage *img;
+   int stride, dri_components;
+
+   if (num_names != 1)
+      return NULL;
+   if (offsets[0] != 0)
+      return NULL;
+
+   switch(format) {
+   case __DRI_IMAGE_FOURCC_RGB565:
+      format = __DRI_IMAGE_FORMAT_RGB565;
+      dri_components = __DRI_IMAGE_COMPONENTS_RGB;
+      break;
+   case __DRI_IMAGE_FOURCC_ARGB8888:
+      format = __DRI_IMAGE_FORMAT_ARGB8888;
+      dri_components = __DRI_IMAGE_COMPONENTS_RGBA;
+      break;
+   case __DRI_IMAGE_FOURCC_XRGB8888:
+      format = __DRI_IMAGE_FORMAT_XRGB8888;
+      dri_components = __DRI_IMAGE_COMPONENTS_RGB;
+      break;
+   case __DRI_IMAGE_FOURCC_ABGR8888:
+      format = __DRI_IMAGE_FORMAT_ABGR8888;
+      dri_components = __DRI_IMAGE_COMPONENTS_RGBA;
+      break;
+   case __DRI_IMAGE_FOURCC_XBGR8888:
+      format = __DRI_IMAGE_FORMAT_XBGR8888;
+      dri_components = __DRI_IMAGE_COMPONENTS_RGB;
+      break;
+   default:
+      return NULL;
+   }
+
+   /* Strides are in bytes not pixels. */
+   stride = strides[0] /4;
+
+   img = dri2_create_image_from_name(screen, width, height, format,
+                                     names[0], stride, loaderPrivate);
+   if (img == NULL)
+      return NULL;
+
+   img->dri_components = dri_components;
+   return img;
+}
+
+static __DRIimage *
+dri2_from_planar(__DRIimage *image, int plane, void *loaderPrivate)
+{
+   __DRIimage *img;
+
+   if (plane != 0)
+      return NULL;
+
+   if (image->dri_components == 0)
+      return NULL;
+
+   img = dri2_dup_image(image, loaderPrivate);
+   if (img == NULL)
+      return NULL;
+
+   /* set this to 0 for sub images. */
+   img->dri_components = 0;
+   return img;
+}
+
 static void
 dri2_destroy_image(__DRIimage *img)
 {
@@ -657,7 +735,7 @@ dri2_destroy_image(__DRIimage *img)
 }
 
 static struct __DRIimageExtensionRec dri2ImageExtension = {
-    { __DRI_IMAGE, 4 },
+    { __DRI_IMAGE, 5 },
     dri2_create_image_from_name,
     dri2_create_image_from_renderbuffer,
     dri2_destroy_image,
@@ -665,6 +743,8 @@ static struct __DRIimageExtensionRec dri2ImageExtension = {
     dri2_query_image,
     dri2_dup_image,
     dri2_validate_usage,
+    dri2_from_names,
+    dri2_from_planar,
 };
 
 /*
diff --git a/src/gbm/backends/dri/gbm_dri.c b/src/gbm/backends/dri/gbm_dri.c
index 1831f13..d8b1cc7 100644
--- a/src/gbm/backends/dri/gbm_dri.c
+++ b/src/gbm/backends/dri/gbm_dri.c
@@ -363,7 +363,7 @@ gbm_dri_bo_import(struct gbm_device *gbm,
    struct gbm_dri_bo *bo;
    __DRIimage *image;
    unsigned dri_use = 0;
-   int dri_format, width, height, gbm_format, stride, cpp, offset;
+   int gbm_format;
 
    /* Required for query image WIDTH & HEIGHT */
    if (dri->image->base.version < 4)
@@ -376,20 +376,15 @@ gbm_dri_bo_import(struct gbm_device *gbm,
       struct wl_drm_buffer *wb = (struct wl_drm_buffer *) buffer;
 
       image = wb->driver_buffer;
-      stride = wb->stride[0];
-      offset = wb->offset[0];
-      cpp = 4;
+
       switch (wb->format) {
       case WL_DRM_FORMAT_XRGB8888:
-         dri_format = __DRI_IMAGE_FORMAT_XRGB8888;
          gbm_format = GBM_FORMAT_XRGB8888;
          break;
       case WL_DRM_FORMAT_ARGB8888:
-         dri_format = __DRI_IMAGE_FORMAT_ARGB8888;
          gbm_format = GBM_FORMAT_ARGB8888;
          break;
       case WL_DRM_FORMAT_YUYV:
-         dri_format = __DRI_IMAGE_FORMAT_ARGB8888;
          gbm_format = GBM_FORMAT_YUYV;
          break;
       default:
@@ -401,15 +396,15 @@ gbm_dri_bo_import(struct gbm_device *gbm,
 
    case GBM_BO_IMPORT_EGL_IMAGE:
    {
+      int dri_format;
       if (dri->lookup_image == NULL)
          return NULL;
 
       image = dri->lookup_image(dri->screen, buffer, dri->lookup_user_data);
       dri->image->queryImage(image, __DRI_IMAGE_ATTRIB_FORMAT, &dri_format);
       gbm_format = gbm_dri_to_gbm_format(dri_format);
-      dri->image->queryImage(image, __DRI_IMAGE_ATTRIB_STRIDE, &stride);
-      offset = 0;
-      cpp = 4;
+      if (gbm_format == 0)
+         return NULL;
       break;
    }
 
@@ -422,13 +417,7 @@ gbm_dri_bo_import(struct gbm_device *gbm,
    if (bo == NULL)
       return NULL;
 
-   dri->image->queryImage(image, __DRI_IMAGE_ATTRIB_WIDTH, &width);
-   dri->image->queryImage(image, __DRI_IMAGE_ATTRIB_HEIGHT, &height);
-
-   bo->image = dri->image->createSubImage(image,
-                                          width, height, dri_format,
-                                          offset, stride / cpp, NULL);
-
+   bo->image = dri->image->dupImage(image, NULL);
 
    if (usage & GBM_BO_USE_SCANOUT)
       dri_use |= __DRI_IMAGE_USE_SCANOUT;
@@ -441,10 +430,14 @@ gbm_dri_bo_import(struct gbm_device *gbm,
    }
 
    bo->base.base.gbm = gbm;
-   bo->base.base.width = width;
-   bo->base.base.height = height;
-   bo->base.base.stride = stride;
    bo->base.base.format = gbm_format;
+
+   dri->image->queryImage(bo->image, __DRI_IMAGE_ATTRIB_WIDTH,
+                          (int*)&bo->base.base.width);
+   dri->image->queryImage(bo->image, __DRI_IMAGE_ATTRIB_HEIGHT,
+                          (int*)&bo->base.base.height);
+   dri->image->queryImage(bo->image, __DRI_IMAGE_ATTRIB_STRIDE,
+                          (int*)&bo->base.base.stride);
    dri->image->queryImage(bo->image, __DRI_IMAGE_ATTRIB_HANDLE,
                           &bo->base.base.handle.s32);
 
-- 
1.7.9.5



More information about the mesa-dev mailing list