[Mesa-dev] [PATCH] r600g: Handle TGSI_OPCODE_CEIL (v2)

[Kai Wasserbäch]

v2: Enabled CEIL on Cayman too.

Signed-off-by: Kai Wasserbäch <kai at dev.carbon-project.org>
Reviewed-by: Tom Stellard <thomas.stellard at amd.com>
---
 Thanks for the review, Tom!

 If this patch is accepted, please apply it to master for me, I don't have
 commit access on FDO.

 src/gallium/drivers/r600/r600_shader.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/src/gallium/drivers/r600/r600_shader.c b/src/gallium/drivers/r600/r600_shader.c
index fa29b36..aa17f20 100644
--- a/src/gallium/drivers/r600/r600_shader.c
+++ b/src/gallium/drivers/r600/r600_shader.c
@@ -5154,7 +5154,7 @@ static struct r600_shader_tgsi_instruction r600_shader_tgsi_instruction[] = {
 	{80,			0, V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
 	{TGSI_OPCODE_PUSHA,	0, V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
 	{TGSI_OPCODE_POPA,	0, V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
-	{TGSI_OPCODE_CEIL,	0, V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
+	{TGSI_OPCODE_CEIL,	0, V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_CEIL, tgsi_op2},
 	{TGSI_OPCODE_I2F,	0, V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_INT_TO_FLT, tgsi_op2_trans},
 	{TGSI_OPCODE_NOT,	0, V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOT_INT, tgsi_op2},
 	{TGSI_OPCODE_TRUNC,	0, V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_TRUNC, tgsi_op2},
@@ -5328,7 +5328,7 @@ static struct r600_shader_tgsi_instruction eg_shader_tgsi_instruction[] = {
 	{80,			0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
 	{TGSI_OPCODE_PUSHA,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
 	{TGSI_OPCODE_POPA,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
-	{TGSI_OPCODE_CEIL,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
+	{TGSI_OPCODE_CEIL,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_CEIL, tgsi_op2},
 	{TGSI_OPCODE_I2F,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_INT_TO_FLT, tgsi_op2_trans},
 	{TGSI_OPCODE_NOT,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOT_INT, tgsi_op2},
 	{TGSI_OPCODE_TRUNC,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_TRUNC, tgsi_op2},
@@ -5502,7 +5502,7 @@ static struct r600_shader_tgsi_instruction cm_shader_tgsi_instruction[] = {
 	{80,			0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
 	{TGSI_OPCODE_PUSHA,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
 	{TGSI_OPCODE_POPA,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
-	{TGSI_OPCODE_CEIL,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOP, tgsi_unsupported},
+	{TGSI_OPCODE_CEIL,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_CEIL, tgsi_op2},
 	{TGSI_OPCODE_I2F,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_INT_TO_FLT, tgsi_op2},
 	{TGSI_OPCODE_NOT,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_NOT_INT, tgsi_op2},
 	{TGSI_OPCODE_TRUNC,	0, EG_V_SQ_ALU_WORD1_OP2_SQ_OP2_INST_TRUNC, tgsi_op2},
-- 
1.7.10