[Mesa-dev] [PATCH 7/8] i965: Create a new fragment shader backend for Broadwell.

Kenneth Graunke kenneth at whitecape.org
Tue Dec 10 23:25:29 PST 2013


This replaces the old fs_generator backend.

v2: Port to the C-based representation of assembly instructions.
    Fix texturing after the texture-grf merge.

Signed-off-by: Kenneth Graunke <kenneth at whitecape.org>
---
 src/mesa/drivers/dri/i965/Makefile.sources      |    1 +
 src/mesa/drivers/dri/i965/brw_fs.cpp            |   16 +-
 src/mesa/drivers/dri/i965/brw_fs.h              |   64 ++
 src/mesa/drivers/dri/i965/gen8_fs_generator.cpp | 1002 +++++++++++++++++++++++
 4 files changed, 1078 insertions(+), 5 deletions(-)
 create mode 100644 src/mesa/drivers/dri/i965/gen8_fs_generator.cpp

diff --git a/src/mesa/drivers/dri/i965/Makefile.sources b/src/mesa/drivers/dri/i965/Makefile.sources
index f38d06e..d0c85cf 100644
--- a/src/mesa/drivers/dri/i965/Makefile.sources
+++ b/src/mesa/drivers/dri/i965/Makefile.sources
@@ -140,6 +140,7 @@ i965_FILES = \
 	gen7_wm_state.c \
 	gen7_wm_surface_state.c \
 	gen8_disasm.c \
+	gen8_fs_generator.cpp \
 	gen8_generator.cpp \
 	gen8_instruction.c \
 	gen8_vec4_generator.cpp \
diff --git a/src/mesa/drivers/dri/i965/brw_fs.cpp b/src/mesa/drivers/dri/i965/brw_fs.cpp
index dbd93e7..7f04669 100644
--- a/src/mesa/drivers/dri/i965/brw_fs.cpp
+++ b/src/mesa/drivers/dri/i965/brw_fs.cpp
@@ -3325,10 +3325,16 @@ brw_wm_fs_emit(struct brw_context *brw, struct brw_wm_compile *c,
       }
    }
 
-   fs_generator g(brw, c, prog, fp, v.dual_src_output.file != BAD_FILE);
-   const unsigned *generated = g.generate_assembly(&v.instructions,
-                                                   simd16_instructions,
-                                                   final_assembly_size);
+   const unsigned *assembly = NULL;
+   if (brw->gen >= 8) {
+      gen8_fs_generator g(brw, c, prog, fp, v.dual_src_output.file != BAD_FILE);
+      assembly = g.generate_assembly(&v.instructions, simd16_instructions,
+                                     final_assembly_size);
+   } else {
+      fs_generator g(brw, c, prog, fp, v.dual_src_output.file != BAD_FILE);
+      assembly = g.generate_assembly(&v.instructions, simd16_instructions,
+                                     final_assembly_size);
+   }
 
    if (unlikely(brw->perf_debug) && shader) {
       if (shader->compiled_once)
@@ -3341,7 +3347,7 @@ brw_wm_fs_emit(struct brw_context *brw, struct brw_wm_compile *c,
       }
    }
 
-   return generated;
+   return assembly;
 }
 
 bool
diff --git a/src/mesa/drivers/dri/i965/brw_fs.h b/src/mesa/drivers/dri/i965/brw_fs.h
index e516046..768c1eb 100644
--- a/src/mesa/drivers/dri/i965/brw_fs.h
+++ b/src/mesa/drivers/dri/i965/brw_fs.h
@@ -47,6 +47,7 @@ extern "C" {
 #include "brw_wm.h"
 #include "brw_shader.h"
 }
+#include "gen8_generator.h"
 #include "glsl/glsl_types.h"
 #include "glsl/ir.h"
 
@@ -617,6 +618,69 @@ private:
    void *mem_ctx;
 };
 
+/**
+ * The fragment shader code generator.
+ *
+ * Translates FS IR to actual i965 assembly code.
+ */
+class gen8_fs_generator : public gen8_generator
+{
+public:
+   gen8_fs_generator(struct brw_context *brw,
+                     struct brw_wm_compile *c,
+                     struct gl_shader_program *prog,
+                     struct gl_fragment_program *fp,
+                     bool dual_source_output);
+   ~gen8_fs_generator();
+
+   const unsigned *generate_assembly(exec_list *simd8_instructions,
+                                     exec_list *simd16_instructions,
+                                     unsigned *assembly_size);
+
+private:
+   void generate_code(exec_list *instructions);
+   void generate_fb_write(fs_inst *inst);
+   void generate_linterp(fs_inst *inst, struct brw_reg dst,
+                         struct brw_reg *src);
+   void generate_tex(fs_inst *inst, struct brw_reg dst, struct brw_reg src);
+   void generate_math1(fs_inst *inst, struct brw_reg dst, struct brw_reg src);
+   void generate_math2(fs_inst *inst, struct brw_reg dst,
+                       struct brw_reg src0, struct brw_reg src1);
+   void generate_ddx(fs_inst *inst, struct brw_reg dst, struct brw_reg src);
+   void generate_ddy(fs_inst *inst, struct brw_reg dst, struct brw_reg src,
+                     bool negate_value);
+   void generate_scratch_write(fs_inst *inst, struct brw_reg src);
+   void generate_scratch_read(fs_inst *inst, struct brw_reg dst);
+   void generate_scratch_read_gen7(fs_inst *inst, struct brw_reg dst);
+   void generate_uniform_pull_constant_load(fs_inst *inst,
+                                            struct brw_reg dst,
+                                            struct brw_reg index,
+                                            struct brw_reg offset);
+   void generate_varying_pull_constant_load(fs_inst *inst,
+                                            struct brw_reg dst,
+                                            struct brw_reg index,
+                                            struct brw_reg offset);
+   void generate_mov_dispatch_to_flags(fs_inst *ir);
+   void generate_set_simd4x2_offset(fs_inst *ir,
+                                    struct brw_reg dst,
+                                    struct brw_reg src,
+                                    struct brw_reg offset);
+   void generate_discard_jump(fs_inst *ir);
+
+   void patch_discard_jumps_to_fb_writes();
+
+   void mark_surface_used(unsigned surf_index);
+
+   struct brw_wm_compile *c;
+   const struct gl_fragment_program *fp;
+
+   unsigned dispatch_width; /** 8 or 16 */
+
+   bool dual_source_output;
+
+   exec_list discard_halt_patches;
+};
+
 bool brw_do_channel_expressions(struct exec_list *instructions);
 bool brw_do_vector_splitting(struct exec_list *instructions);
 bool brw_fs_precompile(struct gl_context *ctx, struct gl_shader_program *prog);
diff --git a/src/mesa/drivers/dri/i965/gen8_fs_generator.cpp b/src/mesa/drivers/dri/i965/gen8_fs_generator.cpp
new file mode 100644
index 0000000..04fa699
--- /dev/null
+++ b/src/mesa/drivers/dri/i965/gen8_fs_generator.cpp
@@ -0,0 +1,1002 @@
+/*
+ * Copyright © 2010, 2011, 2012 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+/** @file gen8_fs_generate.cpp
+ *
+ * Code generation for Gen8+ hardware.
+ */
+
+extern "C" {
+#include "main/macros.h"
+#include "brw_context.h"
+} /* extern "C" */
+
+#include "brw_fs.h"
+#include "brw_cfg.h"
+#include "glsl/ir_print_visitor.h"
+
+gen8_fs_generator::gen8_fs_generator(struct brw_context *brw,
+                                     struct brw_wm_compile *c,
+                                     struct gl_shader_program *shader_prog,
+                                     struct gl_fragment_program *fp,
+                                     bool dual_source_output)
+   : gen8_generator(brw, shader_prog, &fp->Base, c), c(c), fp(fp),
+     dual_source_output(dual_source_output)
+{
+   shader =
+      shader_prog ? shader_prog->_LinkedShaders[MESA_SHADER_FRAGMENT] : NULL;
+}
+
+gen8_fs_generator::~gen8_fs_generator()
+{
+}
+
+void
+gen8_fs_generator::mark_surface_used(unsigned surf_index)
+{
+   assert(surf_index < BRW_MAX_SURFACES);
+
+   c->prog_data.base.binding_table.size_bytes =
+      MAX2(c->prog_data.base.binding_table.size_bytes, (surf_index + 1) * 4);
+}
+
+void
+gen8_fs_generator::generate_fb_write(fs_inst *ir)
+{
+   if (fp->UsesKill) {
+      gen8_instruction *mov =
+         MOV(retype(brw_vec1_grf(1, 7), BRW_REGISTER_TYPE_UW),
+             brw_flag_reg(0, 1));
+      gen8_set_mask_control(mov, BRW_MASK_DISABLE);
+   }
+
+   if (ir->header_present) {
+      gen8_instruction *mov =
+         MOV_RAW(brw_message_reg(ir->base_mrf), brw_vec8_grf(0, 0));
+      gen8_set_exec_size(mov, BRW_EXECUTE_16);
+   }
+
+   gen8_instruction *inst = next_inst(BRW_OPCODE_SENDC);
+
+   gen8_set_dst(inst, retype(vec8(brw_null_reg()), BRW_REGISTER_TYPE_UW));
+
+   /* headerless version, just submit color payload */
+   gen8_set_src0(inst, brw_vec8_grf(GEN7_MRF_HACK_START + ir->base_mrf, 0));
+
+   /* Set up the "Message Specific Control" bits for the Data Port Message
+    * Descriptor.  These are documented in the "Render Target Write" message's
+    * "Message Descriptor" documentation (vol5c.2).
+    */
+   uint32_t msg_type;
+   /* Set the Message Type */
+   if (this->dual_source_output)
+      msg_type = BRW_DATAPORT_RENDER_TARGET_WRITE_SIMD8_DUAL_SOURCE_SUBSPAN01;
+   else if (dispatch_width == 16)
+      msg_type = BRW_DATAPORT_RENDER_TARGET_WRITE_SIMD16_SINGLE_SOURCE;
+   else
+      msg_type = BRW_DATAPORT_RENDER_TARGET_WRITE_SIMD8_SINGLE_SOURCE_SUBSPAN01;
+
+   uint32_t msg_control = msg_type;
+
+   /* "Last Render Target Select" must be set on all writes to the last of
+    * the render targets (if using MRT), or always for a single RT scenario.
+    */
+   if (ir->target == c->key.nr_color_regions - 1)
+      msg_control |= (1 << 4); /* Last Render Target Select */
+
+   uint32_t surf_index =
+      c->prog_data.binding_table.render_target_start + ir->target;
+
+   gen8_set_dp_message(inst, GEN6_SFID_DATAPORT_RENDER_CACHE,
+                        surf_index,
+                        GEN6_DATAPORT_WRITE_MESSAGE_RENDER_TARGET_WRITE,
+                        msg_control,
+                        ir->mlen,
+                        0,
+                        ir->header_present,
+                        ir->eot);
+
+   mark_surface_used(surf_index);
+}
+
+void
+gen8_fs_generator::generate_linterp(fs_inst *inst,
+                                    struct brw_reg dst,
+                                    struct brw_reg *src)
+{
+   struct brw_reg delta_x = src[0];
+   struct brw_reg delta_y = src[1];
+   struct brw_reg interp = src[2];
+
+   (void) delta_y;
+   assert(delta_y.nr == delta_x.nr + 1);
+   PLN(dst, interp, delta_x);
+}
+
+void
+gen8_fs_generator::generate_tex(fs_inst *ir,
+                                struct brw_reg dst,
+                                struct brw_reg src)
+{
+   int msg_type = -1;
+   int rlen = 4;
+   uint32_t simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD8;
+
+   assert(src.file == BRW_GENERAL_REGISTER_FILE);
+
+   if (dispatch_width == 16 && !ir->force_uncompressed && !ir->force_sechalf)
+      simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
+
+   switch (ir->opcode) {
+   case SHADER_OPCODE_TEX:
+      if (ir->shadow_compare) {
+         msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_COMPARE;
+      } else {
+         msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE;
+      }
+      break;
+   case FS_OPCODE_TXB:
+      if (ir->shadow_compare) {
+         msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_BIAS_COMPARE;
+      } else {
+         msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_BIAS;
+      }
+      break;
+   case SHADER_OPCODE_TXL:
+      if (ir->shadow_compare) {
+         msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LOD_COMPARE;
+      } else {
+         msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LOD;
+      }
+      break;
+   case SHADER_OPCODE_TXS:
+      msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_RESINFO;
+      break;
+   case SHADER_OPCODE_TXD:
+      if (ir->shadow_compare) {
+         msg_type = HSW_SAMPLER_MESSAGE_SAMPLE_DERIV_COMPARE;
+      } else {
+         msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_DERIVS;
+      }
+      break;
+   case SHADER_OPCODE_TXF:
+      msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LD;
+      break;
+   case SHADER_OPCODE_TXF_MS:
+      msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_LD2DMS;
+      break;
+   case SHADER_OPCODE_LOD:
+      msg_type = GEN5_SAMPLER_MESSAGE_LOD;
+      break;
+   case SHADER_OPCODE_TG4:
+      if (ir->shadow_compare) {
+         assert(brw->gen >= 7);
+         msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_C;
+      } else {
+         assert(brw->gen >= 6);
+         msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4;
+      }
+      break;
+   case SHADER_OPCODE_TG4_OFFSET:
+      assert(brw->gen >= 7);
+      if (ir->shadow_compare) {
+         msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_PO_C;
+      } else {
+         msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_PO;
+      }
+      break;
+   default:
+      assert(!"not reached");
+      break;
+   }
+   assert(msg_type != -1);
+
+   if (simd_mode == BRW_SAMPLER_SIMD_MODE_SIMD16) {
+      rlen = 8;
+      dst = vec16(dst);
+   }
+
+   if (ir->header_present) {
+      /* The send-from-GRF for 16-wide texturing with a header has an extra
+       * hardware register allocated to it, which we need to skip over (since
+       * our coordinates in the payload are in the even-numbered registers,
+       * and the header comes right before the first one.
+       */
+      if (dispatch_width == 16)
+         src.nr++;
+
+      MOV_RAW(src, brw_vec8_grf(0, 0));
+
+      if (ir->texture_offset) {
+         /* Set the texel offset bits. */
+         MOV_RAW(retype(brw_vec1_grf(src.nr, 2), BRW_REGISTER_TYPE_UD),
+                 brw_imm_ud(ir->texture_offset));
+      }
+   }
+
+   uint32_t surf_index =
+      c->prog_data.base.binding_table.texture_start + ir->sampler;
+
+   gen8_instruction *inst = next_inst(BRW_OPCODE_SEND);
+   gen8_set_dst(inst, dst);
+   gen8_set_src0(inst, src);
+   gen8_set_sampler_message(inst, surf_index,
+                             ir->sampler,
+                             msg_type,
+                             rlen,
+                             ir->mlen,
+                             ir->header_present,
+                             simd_mode);
+
+   mark_surface_used(surf_index);
+}
+
+
+/* For OPCODE_DDX and OPCODE_DDY, per channel of output we've got input
+ * looking like:
+ *
+ * arg0: ss0.tl ss0.tr ss0.bl ss0.br ss1.tl ss1.tr ss1.bl ss1.br
+ *
+ * and we're trying to produce:
+ *
+ *           DDX                     DDY
+ * dst: (ss0.tr - ss0.tl)     (ss0.tl - ss0.bl)
+ *      (ss0.tr - ss0.tl)     (ss0.tr - ss0.br)
+ *      (ss0.br - ss0.bl)     (ss0.tl - ss0.bl)
+ *      (ss0.br - ss0.bl)     (ss0.tr - ss0.br)
+ *      (ss1.tr - ss1.tl)     (ss1.tl - ss1.bl)
+ *      (ss1.tr - ss1.tl)     (ss1.tr - ss1.br)
+ *      (ss1.br - ss1.bl)     (ss1.tl - ss1.bl)
+ *      (ss1.br - ss1.bl)     (ss1.tr - ss1.br)
+ *
+ * and add another set of two more subspans if in 16-pixel dispatch mode.
+ *
+ * For DDX, it ends up being easy: width = 2, horiz=0 gets us the same result
+ * for each pair, and vertstride = 2 jumps us 2 elements after processing a
+ * pair. But for DDY, it's harder, as we want to produce the pairs swizzled
+ * between each other.  We could probably do it like ddx and swizzle the right
+ * order later, but bail for now and just produce
+ * ((ss0.tl - ss0.bl)x4 (ss1.tl - ss1.bl)x4)
+ */
+void
+gen8_fs_generator::generate_ddx(fs_inst *inst,
+                                struct brw_reg dst,
+                                struct brw_reg src)
+{
+   struct brw_reg src0 = brw_reg(src.file, src.nr, 1,
+                                 BRW_REGISTER_TYPE_F,
+                                 BRW_VERTICAL_STRIDE_2,
+                                 BRW_WIDTH_2,
+                                 BRW_HORIZONTAL_STRIDE_0,
+                                 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
+   struct brw_reg src1 = brw_reg(src.file, src.nr, 0,
+                                 BRW_REGISTER_TYPE_F,
+                                 BRW_VERTICAL_STRIDE_2,
+                                 BRW_WIDTH_2,
+                                 BRW_HORIZONTAL_STRIDE_0,
+                                 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
+   ADD(dst, src0, negate(src1));
+}
+
+/* The negate_value boolean is used to negate the derivative computation for
+ * FBOs, since they place the origin at the upper left instead of the lower
+ * left.
+ */
+void
+gen8_fs_generator::generate_ddy(fs_inst *inst,
+                                struct brw_reg dst,
+                                struct brw_reg src,
+                                bool negate_value)
+{
+   struct brw_reg src0 = brw_reg(src.file, src.nr, 0,
+                                 BRW_REGISTER_TYPE_F,
+                                 BRW_VERTICAL_STRIDE_4,
+                                 BRW_WIDTH_4,
+                                 BRW_HORIZONTAL_STRIDE_0,
+                                 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
+   struct brw_reg src1 = brw_reg(src.file, src.nr, 2,
+                                 BRW_REGISTER_TYPE_F,
+                                 BRW_VERTICAL_STRIDE_4,
+                                 BRW_WIDTH_4,
+                                 BRW_HORIZONTAL_STRIDE_0,
+                                 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
+   if (negate_value)
+      ADD(dst, src1, negate(src0));
+   else
+      ADD(dst, src0, negate(src1));
+}
+
+void
+gen8_fs_generator::generate_scratch_write(fs_inst *inst, struct brw_reg dst)
+{
+   assert(inst->mlen != 0);
+   assert(!"TODO: Implement generate_scratch_write.");
+}
+
+void
+gen8_fs_generator::generate_scratch_read(fs_inst *inst, struct brw_reg dst)
+{
+   assert(inst->mlen != 0);
+   assert(!"TODO: Implement generate_scratch_read.");
+}
+
+void
+gen8_fs_generator::generate_scratch_read_gen7(fs_inst *inst, struct brw_reg dst)
+{
+   assert(inst->mlen != 0);
+   assert(!"TODO: Implement generate_scratch_read_gen7.");
+}
+
+void
+gen8_fs_generator::generate_uniform_pull_constant_load(fs_inst *inst,
+                                                       struct brw_reg dst,
+                                                       struct brw_reg index,
+                                                       struct brw_reg offset)
+{
+   assert(inst->mlen == 0);
+
+   assert(index.file == BRW_IMMEDIATE_VALUE &&
+          index.type == BRW_REGISTER_TYPE_UD);
+   uint32_t surf_index = index.dw1.ud;
+
+   assert(offset.file == BRW_GENERAL_REGISTER_FILE);
+   /* Reference only the dword we need lest we anger validate_reg() with
+    * reg.width > reg.execszie.
+    */
+   offset = brw_vec1_grf(offset.nr, 0);
+
+   gen8_instruction *send = next_inst(BRW_OPCODE_SEND);
+   gen8_set_mask_control(send, BRW_MASK_DISABLE);
+
+   /* We use the SIMD4x2 mode because we want to end up with 4 constants in
+    * the destination loaded consecutively from the same offset (which appears
+    * in the first component, and the rest are ignored).
+    */
+   dst.width = BRW_WIDTH_4;
+   gen8_set_dst(send, dst);
+   gen8_set_src0(send, offset);
+   gen8_set_sampler_message(send, surf_index,
+                             0, /* The LD message ignore the sampler unit. */
+                             GEN5_SAMPLER_MESSAGE_SAMPLE_LD,
+                             1, /* rlen */
+                             1, /* mlen */
+                             false, /* no header */
+                             BRW_SAMPLER_SIMD_MODE_SIMD4X2);
+
+   mark_surface_used(surf_index);
+}
+
+void
+gen8_fs_generator::generate_varying_pull_constant_load(fs_inst *ir,
+                                                       struct brw_reg dst,
+                                                       struct brw_reg index,
+                                                       struct brw_reg offset)
+{
+   /* Varying-offset pull constant loads are treated as a normal expression on
+    * gen7, so the fact that it's a send message is hidden at the IR level.
+    */
+   assert(!ir->header_present);
+   assert(!ir->mlen);
+
+   assert(index.file == BRW_IMMEDIATE_VALUE &&
+          index.type == BRW_REGISTER_TYPE_UD);
+   uint32_t surf_index = index.dw1.ud;
+
+   uint32_t simd_mode, rlen, mlen;
+   if (dispatch_width == 16) {
+      mlen = 2;
+      rlen = 8;
+      simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
+   } else {
+      mlen = 1;
+      rlen = 4;
+      simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD8;
+   }
+
+   gen8_instruction *send = next_inst(BRW_OPCODE_SEND);
+   gen8_set_dst(send, dst);
+   gen8_set_src0(send, offset);
+   gen8_set_sampler_message(send, surf_index,
+                             0, /* The LD message ignore the sampler unit. */
+                             GEN5_SAMPLER_MESSAGE_SAMPLE_LD,
+                             rlen, /* rlen */
+                             mlen, /* mlen */
+                             false, /* no header */
+                             simd_mode);
+
+   mark_surface_used(surf_index);
+}
+
+/**
+ * Cause the current pixel/sample mask (from R1.7 bits 15:0) to be transferred
+ * into the flags register (f0.0).
+ *
+ * Used only on Gen6 and above.
+ */
+void
+gen8_fs_generator::generate_mov_dispatch_to_flags(fs_inst *ir)
+{
+   struct brw_reg flags = brw_flag_reg(0, ir->flag_subreg);
+   struct brw_reg dispatch_mask =
+      retype(brw_vec1_grf(1, 7), BRW_REGISTER_TYPE_UW);
+
+   gen8_instruction *mov = MOV(flags, dispatch_mask);
+   gen8_set_mask_control(mov, BRW_MASK_DISABLE);
+}
+
+void
+gen8_fs_generator::generate_discard_jump(fs_inst *ir)
+{
+   /* This HALT will be patched up at FB write time to point UIP at the end of
+    * the program, and at brw_uip_jip() JIP will be set to the end of the
+    * current block (or the program).
+    */
+   discard_halt_patches.push_tail(new(mem_ctx) ip_record(nr_inst));
+
+   HALT();
+}
+
+void
+gen8_fs_generator::patch_discard_jumps_to_fb_writes()
+{
+   if (discard_halt_patches.is_empty())
+      return;
+
+   /* There is a somewhat strange undocumented requirement of using
+    * HALT, according to the simulator.  If some channel has HALTed to
+    * a particular UIP, then by the end of the program, every channel
+    * must have HALTed to that UIP.  Furthermore, the tracking is a
+    * stack, so you can't do the final halt of a UIP after starting
+    * halting to a new UIP.
+    *
+    * Symptoms of not emitting this instruction on actual hardware
+    * included GPU hangs and sparkly rendering on the piglit discard
+    * tests.
+    */
+   gen8_instruction *last_halt = HALT();
+   gen8_set_uip(last_halt, 16);
+   gen8_set_jip(last_halt, 16);
+
+   int ip = nr_inst;
+
+   foreach_list(node, &discard_halt_patches) {
+      ip_record *patch_ip = (ip_record *) node;
+      gen8_instruction *patch = &store[patch_ip->ip];
+      assert(gen8_opcode(patch) == BRW_OPCODE_HALT);
+
+      /* HALT takes an instruction distance from the pre-incremented IP. */
+      gen8_set_uip(patch, (ip - patch_ip->ip) * 16);
+   }
+
+   this->discard_halt_patches.make_empty();
+}
+
+/**
+ * Sets the first dword of a vgrf for simd4x2 uniform pull constant
+ * sampler LD messages.
+ *
+ * We don't want to bake it into the send message's code generation because
+ * that means we don't get a chance to schedule the instruction.
+ */
+void
+gen8_fs_generator::generate_set_simd4x2_offset(fs_inst *ir,
+                                               struct brw_reg dst,
+                                               struct brw_reg src,
+                                               struct brw_reg value)
+{
+   assert(value.file == BRW_IMMEDIATE_VALUE);
+   MOV_RAW(retype(brw_vec1_reg(dst.file, dst.nr, 0), value.type), value);
+}
+
+void
+gen8_fs_generator::generate_code(exec_list *instructions)
+{
+   int last_native_inst_offset = next_inst_offset;
+   const char *last_annotation_string = NULL;
+   const void *last_annotation_ir = NULL;
+
+   if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
+      if (shader) {
+         printf("Native code for fragment shader %d (%d-wide dispatch):\n",
+                shader_prog->Name, dispatch_width);
+      } else {
+         printf("Native code for fragment program %d (%d-wide dispatch):\n",
+                prog->Id, dispatch_width);
+      }
+   }
+
+   cfg_t *cfg = NULL;
+   if (unlikely(INTEL_DEBUG & DEBUG_WM))
+      cfg = new(mem_ctx) cfg_t(instructions);
+
+   foreach_list(node, instructions) {
+      fs_inst *ir = (fs_inst *) node;
+      struct brw_reg src[3], dst;
+
+      if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
+         foreach_list(node, &cfg->block_list) {
+            bblock_link *link = (bblock_link *)node;
+            bblock_t *block = link->block;
+
+            if (block->start == ir) {
+               printf("   START B%d", block->block_num);
+               foreach_list(predecessor_node, &block->parents) {
+                  bblock_link *predecessor_link =
+                     (bblock_link *)predecessor_node;
+                  bblock_t *predecessor_block = predecessor_link->block;
+                  printf(" <-B%d", predecessor_block->block_num);
+               }
+               printf("\n");
+            }
+         }
+
+         if (last_annotation_ir != ir->ir) {
+            last_annotation_ir = ir->ir;
+            if (last_annotation_ir) {
+               printf("   ");
+               if (shader)
+                  ((ir_instruction *) ir->ir)->print();
+               else {
+                  const prog_instruction *fpi;
+                  fpi = (const prog_instruction *) ir->ir;
+                  printf("%d: ", (int)(fpi - prog->Instructions));
+                  _mesa_fprint_instruction_opt(stdout,
+                                               fpi,
+                                               0, PROG_PRINT_DEBUG, NULL);
+               }
+               printf("\n");
+            }
+         }
+         if (last_annotation_string != ir->annotation) {
+            last_annotation_string = ir->annotation;
+            if (last_annotation_string)
+               printf("   %s\n", last_annotation_string);
+         }
+      }
+
+      for (unsigned int i = 0; i < 3; i++) {
+         src[i] = brw_reg_from_fs_reg(&ir->src[i]);
+
+         /* The accumulator result appears to get used for the
+          * conditional modifier generation.  When negating a UD
+          * value, there is a 33rd bit generated for the sign in the
+          * accumulator value, so now you can't check, for example,
+          * equality with a 32-bit value.  See piglit fs-op-neg-uvec4.
+          */
+         assert(!ir->conditional_mod ||
+                ir->src[i].type != BRW_REGISTER_TYPE_UD ||
+                !ir->src[i].negate);
+      }
+      dst = brw_reg_from_fs_reg(&ir->dst);
+
+      default_state.conditional_mod = ir->conditional_mod;
+      default_state.predicate = ir->predicate;
+      default_state.predicate_inverse = ir->predicate_inverse;
+      default_state.saturate = ir->saturate;
+      default_state.flag_subreg_nr = ir->flag_subreg;
+
+      if (dispatch_width == 16 && !ir->force_uncompressed)
+         default_state.exec_size = BRW_EXECUTE_16;
+      else
+         default_state.exec_size = BRW_EXECUTE_8;
+
+      /* fs_inst::force_sechalf is only used for original Gen4 code, so we
+       * don't handle it.  Add qtr_control to default_state if that changes.
+       */
+      assert(!ir->force_sechalf);
+
+      switch (ir->opcode) {
+      case BRW_OPCODE_MOV:
+         MOV(dst, src[0]);
+         break;
+      case BRW_OPCODE_ADD:
+         ADD(dst, src[0], src[1]);
+         break;
+      case BRW_OPCODE_MUL:
+         MUL(dst, src[0], src[1]);
+         break;
+      case BRW_OPCODE_MACH:
+         MACH(dst, src[0], src[1]);
+         break;
+
+      case BRW_OPCODE_MAD:
+         default_state.access_mode = BRW_ALIGN_16;
+         if (dispatch_width == 16) {
+            gen8_instruction *mad;
+            mad = MAD(dst, src[0], src[1], src[2]);
+            mad = MAD(sechalf(dst), sechalf(src[0]),
+                      sechalf(src[1]), sechalf(src[2]));
+            gen8_set_qtr_control(mad, GEN6_COMPRESSION_2Q);
+         } else {
+            MAD(dst, src[0], src[1], src[2]);
+         }
+         default_state.access_mode = BRW_ALIGN_1;
+         break;
+
+      case BRW_OPCODE_LRP:
+         default_state.access_mode = BRW_ALIGN_16;
+         if (dispatch_width == 16) {
+            gen8_instruction *lrp;
+            lrp = LRP(dst, src[0], src[1], src[2]);
+            lrp = LRP(sechalf(dst), sechalf(src[0]),
+                      sechalf(src[1]), sechalf(src[2]));
+            gen8_set_qtr_control(lrp, GEN6_COMPRESSION_2Q);
+         } else {
+            LRP(dst, src[0], src[1], src[2]);
+         }
+         default_state.access_mode = BRW_ALIGN_1;
+         break;
+
+
+      case BRW_OPCODE_FRC:
+         FRC(dst, src[0]);
+         break;
+      case BRW_OPCODE_RNDD:
+         RNDD(dst, src[0]);
+         break;
+      case BRW_OPCODE_RNDE:
+         RNDE(dst, src[0]);
+         break;
+      case BRW_OPCODE_RNDZ:
+         RNDZ(dst, src[0]);
+         break;
+
+      case BRW_OPCODE_AND:
+         AND(dst, src[0], src[1]);
+         break;
+      case BRW_OPCODE_OR:
+         OR(dst, src[0], src[1]);
+         break;
+      case BRW_OPCODE_XOR:
+         XOR(dst, src[0], src[1]);
+         break;
+      case BRW_OPCODE_NOT:
+         NOT(dst, src[0]);
+         break;
+      case BRW_OPCODE_ASR:
+         ASR(dst, src[0], src[1]);
+         break;
+      case BRW_OPCODE_SHR:
+         SHR(dst, src[0], src[1]);
+         break;
+      case BRW_OPCODE_SHL:
+         SHL(dst, src[0], src[1]);
+         break;
+
+      case BRW_OPCODE_F32TO16:
+         F32TO16(dst, src[0]);
+         break;
+      case BRW_OPCODE_F16TO32:
+         F16TO32(dst, src[0]);
+         break;
+
+      case BRW_OPCODE_CMP:
+         CMP(dst, ir->conditional_mod, src[0], src[1]);
+         break;
+      case BRW_OPCODE_SEL:
+         SEL(dst, src[0], src[1]);
+         break;
+
+      case BRW_OPCODE_BFREV:
+         /* BFREV only supports UD type for src and dst. */
+         BFREV(retype(dst, BRW_REGISTER_TYPE_UD),
+               retype(src[0], BRW_REGISTER_TYPE_UD));
+         break;
+
+      case BRW_OPCODE_FBH:
+         /* FBH only supports UD type for dst. */
+         FBH(retype(dst, BRW_REGISTER_TYPE_UD), src[0]);
+         break;
+
+      case BRW_OPCODE_FBL:
+         /* FBL only supports UD type for dst. */
+         FBL(retype(dst, BRW_REGISTER_TYPE_UD), src[0]);
+         break;
+
+      case BRW_OPCODE_CBIT:
+         /* CBIT only supports UD type for dst. */
+         CBIT(retype(dst, BRW_REGISTER_TYPE_UD), src[0]);
+         break;
+
+      case BRW_OPCODE_ADDC: {
+         gen8_instruction *addc = ADDC(dst, src[0], src[1]);
+         gen8_set_acc_wr_control(addc, 1);
+         break;
+      }
+
+      case BRW_OPCODE_SUBB: {
+         gen8_instruction *subb = SUBB(dst, src[0], src[1]);
+         gen8_set_acc_wr_control(subb, 1);
+         break;
+      }
+
+      case BRW_OPCODE_BFE:
+         default_state.access_mode = BRW_ALIGN_16;
+         if (dispatch_width == 16) {
+            gen8_instruction *bfe;
+            bfe = BFE(dst, src[0], src[1], src[2]);
+            bfe = BFE(sechalf(dst), sechalf(src[0]),
+                      sechalf(src[1]), sechalf(src[2]));
+            gen8_set_qtr_control(bfe, GEN6_COMPRESSION_2Q);
+         } else {
+            BFE(dst, src[0], src[1], src[2]);
+         }
+         default_state.access_mode = BRW_ALIGN_1;
+         break;
+
+      case BRW_OPCODE_BFI1:
+         BFI1(dst, src[0], src[1]);
+         break;
+
+      case BRW_OPCODE_BFI2:
+         default_state.access_mode = BRW_ALIGN_16;
+         if (dispatch_width == 16) {
+            gen8_instruction *bfi2;
+            bfi2 = BFI2(dst, src[0], src[1], src[2]);
+            bfi2 = BFI2(sechalf(dst), sechalf(src[0]),
+                        sechalf(src[1]), sechalf(src[2]));
+            gen8_set_qtr_control(bfi2, GEN6_COMPRESSION_2Q);
+         } else {
+            BFI2(dst, src[0], src[1], src[2]);
+         }
+         default_state.access_mode = BRW_ALIGN_1;
+         break;
+
+      case BRW_OPCODE_IF:
+         IF(BRW_PREDICATE_NORMAL);
+         break;
+
+      case BRW_OPCODE_ELSE:
+         ELSE();
+         break;
+
+      case BRW_OPCODE_ENDIF:
+         ENDIF();
+         break;
+
+      case BRW_OPCODE_DO:
+         DO();
+         break;
+
+      case BRW_OPCODE_BREAK:
+         BREAK();
+         break;
+
+      case BRW_OPCODE_CONTINUE:
+         CONTINUE();
+         break;
+
+      case BRW_OPCODE_WHILE:
+         WHILE();
+         break;
+
+      case SHADER_OPCODE_RCP:
+         MATH(BRW_MATH_FUNCTION_INV, dst, src[0]);
+         break;
+
+      case SHADER_OPCODE_RSQ:
+         MATH(BRW_MATH_FUNCTION_RSQ, dst, src[0]);
+         break;
+
+      case SHADER_OPCODE_SQRT:
+         MATH(BRW_MATH_FUNCTION_SQRT, dst, src[0]);
+         break;
+
+      case SHADER_OPCODE_EXP2:
+         MATH(BRW_MATH_FUNCTION_EXP, dst, src[0]);
+         break;
+
+      case SHADER_OPCODE_LOG2:
+         MATH(BRW_MATH_FUNCTION_LOG, dst, src[0]);
+         break;
+
+      case SHADER_OPCODE_SIN:
+         MATH(BRW_MATH_FUNCTION_SIN, dst, src[0]);
+         break;
+
+      case SHADER_OPCODE_COS:
+         MATH(BRW_MATH_FUNCTION_COS, dst, src[0]);
+         break;
+
+      case SHADER_OPCODE_INT_QUOTIENT:
+         MATH(BRW_MATH_FUNCTION_INT_DIV_QUOTIENT, dst, src[0], src[1]);
+         break;
+
+      case SHADER_OPCODE_INT_REMAINDER:
+         MATH(BRW_MATH_FUNCTION_INT_DIV_REMAINDER, dst, src[0], src[1]);
+         break;
+
+      case SHADER_OPCODE_POW:
+         MATH(BRW_MATH_FUNCTION_POW, dst, src[0], src[1]);
+         break;
+
+      case FS_OPCODE_PIXEL_X:
+      case FS_OPCODE_PIXEL_Y:
+         assert(!"FS_OPCODE_PIXEL_X and FS_OPCODE_PIXEL_Y are only for Gen4-5.");
+         break;
+
+      case FS_OPCODE_CINTERP:
+         MOV(dst, src[0]);
+         break;
+      case FS_OPCODE_LINTERP:
+         generate_linterp(ir, dst, src);
+         break;
+      case SHADER_OPCODE_TEX:
+      case FS_OPCODE_TXB:
+      case SHADER_OPCODE_TXD:
+      case SHADER_OPCODE_TXF:
+      case SHADER_OPCODE_TXF_MS:
+      case SHADER_OPCODE_TXL:
+      case SHADER_OPCODE_TXS:
+      case SHADER_OPCODE_LOD:
+      case SHADER_OPCODE_TG4:
+      case SHADER_OPCODE_TG4_OFFSET:
+         generate_tex(ir, dst, src[0]);
+         break;
+
+      case FS_OPCODE_DDX:
+         generate_ddx(ir, dst, src[0]);
+         break;
+      case FS_OPCODE_DDY:
+         /* Make sure fp->UsesDFdy flag got set (otherwise there's no
+          * guarantee that c->key.render_to_fbo is set).
+          */
+         assert(fp->UsesDFdy);
+         generate_ddy(ir, dst, src[0], c->key.render_to_fbo);
+         break;
+
+      case SHADER_OPCODE_GEN4_SCRATCH_WRITE:
+         generate_scratch_write(ir, src[0]);
+         break;
+
+      case SHADER_OPCODE_GEN4_SCRATCH_READ:
+         generate_scratch_read(ir, dst);
+         break;
+
+      case SHADER_OPCODE_GEN7_SCRATCH_READ:
+         generate_scratch_read_gen7(ir, dst);
+         break;
+
+      case FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD_GEN7:
+         generate_uniform_pull_constant_load(ir, dst, src[0], src[1]);
+         break;
+
+      case FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_GEN7:
+         generate_varying_pull_constant_load(ir, dst, src[0], src[1]);
+         break;
+
+      case FS_OPCODE_FB_WRITE:
+         generate_fb_write(ir);
+         break;
+
+      case FS_OPCODE_MOV_DISPATCH_TO_FLAGS:
+         generate_mov_dispatch_to_flags(ir);
+         break;
+
+      case FS_OPCODE_DISCARD_JUMP:
+         generate_discard_jump(ir);
+         break;
+
+      case SHADER_OPCODE_SHADER_TIME_ADD:
+         assert(!"XXX: Missing Gen8 scalar support for INTEL_DEBUG=shader_time");
+         break;
+
+      case SHADER_OPCODE_UNTYPED_ATOMIC:
+         assert(!"XXX: Missing Gen8 scalar support for untyped atomics");
+         break;
+
+      case SHADER_OPCODE_UNTYPED_SURFACE_READ:
+         assert(!"XXX: Missing Gen8 scalar support for untyped surface reads");
+         break;
+
+      case FS_OPCODE_SET_SIMD4X2_OFFSET:
+         generate_set_simd4x2_offset(ir, dst, src[0], src[1]);
+         break;
+
+      case FS_OPCODE_SET_OMASK:
+         assert(!"XXX: Missing Gen8 scalar support for SET_OMASK");
+         break;
+
+      case FS_OPCODE_SET_SAMPLE_ID:
+         assert(!"XXX: Missing Gen8 scalar support for SET_SAMPLE_ID");
+         break;
+
+      case FS_OPCODE_PACK_HALF_2x16_SPLIT:
+         assert(!"XXX: Missing Gen8 scalar support for PACK_HALF_2x16_SPLIT");
+         break;
+
+      case FS_OPCODE_UNPACK_HALF_2x16_SPLIT_X:
+      case FS_OPCODE_UNPACK_HALF_2x16_SPLIT_Y:
+         assert(!"XXX: Missing Gen8 scalar support for UNPACK_HALF_2x16_SPLIT");
+         break;
+
+      case FS_OPCODE_PLACEHOLDER_HALT:
+         /* This is the place where the final HALT needs to be inserted if
+          * we've emitted any discards.  If not, this will emit no code.
+          */
+         patch_discard_jumps_to_fb_writes();
+         break;
+
+      default:
+         if (ir->opcode < int(ARRAY_SIZE(opcode_descs))) {
+            _mesa_problem(ctx, "Unsupported opcode `%s' in FS",
+                          opcode_descs[ir->opcode].name);
+         } else {
+            _mesa_problem(ctx, "Unsupported opcode %d in FS", ir->opcode);
+         }
+         abort();
+      }
+
+      if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
+         disassemble(stdout, last_native_inst_offset, next_inst_offset);
+
+         foreach_list(node, &cfg->block_list) {
+            bblock_link *link = (bblock_link *)node;
+            bblock_t *block = link->block;
+
+            if (block->end == ir) {
+               printf("   END B%d", block->block_num);
+               foreach_list(successor_node, &block->children) {
+                  bblock_link *successor_link =
+                     (bblock_link *)successor_node;
+                  bblock_t *successor_block = successor_link->block;
+                  printf(" ->B%d", successor_block->block_num);
+               }
+               printf("\n");
+            }
+         }
+      }
+
+      last_native_inst_offset = next_inst_offset;
+   }
+
+   if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
+      printf("\n");
+   }
+
+   patch_jump_targets();
+}
+
+const unsigned *
+gen8_fs_generator::generate_assembly(exec_list *simd8_instructions,
+                                     exec_list *simd16_instructions,
+                                     unsigned *assembly_size)
+{
+   dispatch_width = 8;
+   generate_code(simd8_instructions);
+
+   if (simd16_instructions) {
+      /* Align to a 64-byte boundary. */
+      while ((nr_inst * sizeof(gen8_instruction)) % 64)
+         NOP();
+
+      /* Save off the start of this 16-wide program */
+      c->prog_data.prog_offset_16 = nr_inst * sizeof(gen8_instruction);
+
+      dispatch_width = 16;
+      generate_code(simd16_instructions);
+   }
+
+   *assembly_size = next_inst_offset;
+   return (const unsigned *) store;
+}
-- 
1.8.4.4



More information about the mesa-dev mailing list