[Mesa-dev] [PATCH 3/3] i965/fs: Prefer things we know reduce reg pressure when pre-scheduling.
Eric Anholt
eric at anholt.net
Tue Nov 5 17:35:22 PST 2013
Previously, the best thing we had was to schedule the things unblocked by
the last chosen instruction, on the hope that it would be consuming two
values at the end of their live intervals while only producing one new
value. But that's just a guess, and we can do counting of usage of
registers to know when an instruction would (almost surely) reduce
register pressure.
The only failure mode I know of in this new dominant heuristic is that
inside of a loop when scheduling the iterator (for example), choosing the
last use of the iterator doesn't actually reduce the live interval of the
iterator. But it doesn't seem to matter in shader-db:
total instructions in shared programs: 1618700 -> 1618700 (0.00%)
instructions in affected programs: 0 -> 0
GAINED: 13
LOST: 0
Note: The new functions are made virtual because I expect we'll soon lift
the pre-regalloc scheduling heuristic over to the vec4 backend.
---
.../drivers/dri/i965/brw_schedule_instructions.cpp | 144 +++++++++++++++++++++
1 file changed, 144 insertions(+)
diff --git a/src/mesa/drivers/dri/i965/brw_schedule_instructions.cpp b/src/mesa/drivers/dri/i965/brw_schedule_instructions.cpp
index 5a42513..53fffa7 100644
--- a/src/mesa/drivers/dri/i965/brw_schedule_instructions.cpp
+++ b/src/mesa/drivers/dri/i965/brw_schedule_instructions.cpp
@@ -417,6 +417,13 @@ public:
this->instructions_to_schedule = 0;
this->post_reg_alloc = post_reg_alloc;
this->time = 0;
+ if (!post_reg_alloc) {
+ this->remaining_grf_uses = rzalloc_array(mem_ctx, int, grf_count);
+ this->grf_active = rzalloc_array(mem_ctx, bool, grf_count);
+ } else {
+ this->remaining_grf_uses = NULL;
+ this->grf_active = NULL;
+ }
}
~instruction_scheduler()
@@ -442,6 +449,10 @@ public:
*/
virtual int issue_time(backend_instruction *inst) = 0;
+ virtual void count_remaining_grf_uses(backend_instruction *inst) = 0;
+ virtual void update_register_pressure(backend_instruction *inst) = 0;
+ virtual int get_register_pressure_benefit(backend_instruction *inst) = 0;
+
void schedule_instructions(backend_instruction *next_block_header);
void *mem_ctx;
@@ -452,6 +463,22 @@ public:
int time;
exec_list instructions;
backend_visitor *bv;
+
+ /**
+ * Number of instructions left to schedule that reference each vgrf.
+ *
+ * Used so that we can prefer scheduling instructions that will end the
+ * live intervals of multiple variables, to reduce register pressure.
+ */
+ int *remaining_grf_uses;
+
+ /**
+ * Tracks whether each VGRF has had an instruction scheduled that uses it.
+ *
+ * This is used to estimate whether scheduling a new instruction will
+ * increase register pressure.
+ */
+ bool *grf_active;
};
class fs_instruction_scheduler : public instruction_scheduler
@@ -463,6 +490,10 @@ public:
schedule_node *choose_instruction_to_schedule();
int issue_time(backend_instruction *inst);
fs_visitor *v;
+
+ void count_remaining_grf_uses(backend_instruction *inst);
+ void update_register_pressure(backend_instruction *inst);
+ int get_register_pressure_benefit(backend_instruction *inst);
};
fs_instruction_scheduler::fs_instruction_scheduler(fs_visitor *v,
@@ -473,6 +504,72 @@ fs_instruction_scheduler::fs_instruction_scheduler(fs_visitor *v,
{
}
+void
+fs_instruction_scheduler::count_remaining_grf_uses(backend_instruction *be)
+{
+ fs_inst *inst = (fs_inst *)be;
+
+ if (!remaining_grf_uses)
+ return;
+
+ if (inst->dst.file == GRF)
+ remaining_grf_uses[inst->dst.reg]++;
+
+ for (int i = 0; i < 3; i++) {
+ if (inst->src[i].file != GRF)
+ continue;
+
+ remaining_grf_uses[inst->src[i].reg]++;
+ }
+}
+
+void
+fs_instruction_scheduler::update_register_pressure(backend_instruction *be)
+{
+ fs_inst *inst = (fs_inst *)be;
+
+ if (!remaining_grf_uses)
+ return;
+
+ if (inst->dst.file == GRF) {
+ remaining_grf_uses[inst->dst.reg]--;
+ grf_active[inst->dst.reg] = true;
+ }
+
+ for (int i = 0; i < 3; i++) {
+ if (inst->src[i].file == GRF) {
+ remaining_grf_uses[inst->src[i].reg]--;
+ grf_active[inst->src[i].reg] = true;
+ }
+ }
+}
+
+int
+fs_instruction_scheduler::get_register_pressure_benefit(backend_instruction *be)
+{
+ fs_inst *inst = (fs_inst *)be;
+ int benefit = 0;
+
+ if (inst->dst.file == GRF) {
+ if (remaining_grf_uses[inst->dst.reg] == 1)
+ benefit += v->virtual_grf_sizes[inst->dst.reg];
+ if (!grf_active[inst->dst.reg])
+ benefit -= v->virtual_grf_sizes[inst->dst.reg];
+ }
+
+ for (int i = 0; i < 3; i++) {
+ if (inst->src[i].file != GRF)
+ continue;
+
+ if (remaining_grf_uses[inst->src[i].reg] == 1)
+ benefit += v->virtual_grf_sizes[inst->src[i].reg];
+ if (!grf_active[inst->src[i].reg])
+ benefit -= v->virtual_grf_sizes[inst->src[i].reg];
+ }
+
+ return benefit;
+}
+
class vec4_instruction_scheduler : public instruction_scheduler
{
public:
@@ -481,6 +578,10 @@ public:
schedule_node *choose_instruction_to_schedule();
int issue_time(backend_instruction *inst);
vec4_visitor *v;
+
+ void count_remaining_grf_uses(backend_instruction *inst);
+ void update_register_pressure(backend_instruction *inst);
+ int get_register_pressure_benefit(backend_instruction *inst);
};
vec4_instruction_scheduler::vec4_instruction_scheduler(vec4_visitor *v,
@@ -491,6 +592,22 @@ vec4_instruction_scheduler::vec4_instruction_scheduler(vec4_visitor *v,
}
void
+vec4_instruction_scheduler::count_remaining_grf_uses(backend_instruction *be)
+{
+}
+
+void
+vec4_instruction_scheduler::update_register_pressure(backend_instruction *be)
+{
+}
+
+int
+vec4_instruction_scheduler::get_register_pressure_benefit(backend_instruction *be)
+{
+ return 0;
+}
+
+void
instruction_scheduler::add_inst(backend_instruction *inst)
{
schedule_node *n = new(mem_ctx) schedule_node(inst, bv->brw);
@@ -1037,6 +1154,23 @@ fs_instruction_scheduler::choose_instruction_to_schedule()
continue;
}
+ /* Most important: If we can definitely reduce register pressure, do
+ * so immediately.
+ */
+ int register_pressure_benefit = get_register_pressure_benefit(n->inst);
+ int chosen_register_pressure_benefit =
+ get_register_pressure_benefit(chosen->inst);
+
+ if (register_pressure_benefit > 0 &&
+ register_pressure_benefit > chosen_register_pressure_benefit) {
+ chosen = n;
+ continue;
+ } else if (chosen_register_pressure_benefit > 0 &&
+ (register_pressure_benefit <
+ chosen_register_pressure_benefit)) {
+ continue;
+ }
+
/* Prefer instructions that recently became available for scheduling.
* These are the things that are most likely to (eventually) make a
* variable dead and reduce register pressure. Typical register
@@ -1153,6 +1287,7 @@ instruction_scheduler::schedule_instructions(backend_instruction *next_block_hea
chosen->remove();
next_block_header->insert_before(chosen->inst);
instructions_to_schedule--;
+ update_register_pressure(chosen->inst);
/* Update the clock for how soon an instruction could start after the
* chosen one.
@@ -1228,6 +1363,15 @@ instruction_scheduler::run(exec_list *all_instructions)
bv->dump_instructions();
}
+ /* Populate the remaining GRF uses array to improve the pre-regalloc
+ * scheduling.
+ */
+ if (remaining_grf_uses) {
+ foreach_list(node, all_instructions) {
+ count_remaining_grf_uses((backend_instruction *)node);
+ }
+ }
+
while (!next_block_header->is_tail_sentinel()) {
/* Add things to be scheduled until we get to a new BB. */
while (!next_block_header->is_tail_sentinel()) {
--
1.8.4.rc3
More information about the mesa-dev
mailing list