[Mesa-dev] [PATCH v3] wayland: Add support for eglSwapInterval

Neil Roberts neil at linux.intel.com
Fri Sep 13 09:04:38 PDT 2013


Here is another version of the patch which brings back the blocking
when there are no buffers available to cope with the situation where
the compositor isn't immediately releasing buffers. Maybe we could
leave the decision about whether to increase the buffer count to 4 as
a separate patch.

Sorry for spamming the list a bit much with this patch.

Regards,
- Neil

-- >8 --

The Wayland EGL platform now respects the eglSwapInterval value. The value is
clamped to either 0 or 1 because it is difficult (and probably not useful) to
sync to more than 1 redraw.

The main change is that if the swap interval is 0 then instead of installing a
frame callback it will just call the display sync method and throttle itself
to that. When the application is not running fullscreen the compositor is
likely to release the previous buffer immediately so this gives the
application the best chance of reusing the buffer.

If there are no buffers available then instead of returning with an error,
get_back_bo will now block until a buffer becomes available. This is necessary
if the compositor is not releasing buffers immediately. As there are only
three buffers, this could actually mean that the client ends up throttled to
the vblank anyway because Weston can hold on to three buffers when the client
is fullscreen. We could fix this by increasing the buffer count to 4 or
changing Weston and KMS to allow cancelling a pending buffer swap, but for now
this patch ignores that problem.

This also moves the vblank configuration defines from platform_x11.c to the
common egl_dri2.h header so they can be shared by both platforms.
---
 src/egl/drivers/dri2/egl_dri2.h         |   7 ++
 src/egl/drivers/dri2/platform_wayland.c | 159 ++++++++++++++++++++++++++++----
 src/egl/drivers/dri2/platform_x11.c     |   6 --
 3 files changed, 147 insertions(+), 25 deletions(-)

diff --git a/src/egl/drivers/dri2/egl_dri2.h b/src/egl/drivers/dri2/egl_dri2.h
index fba5f81..cc657ba 100644
--- a/src/egl/drivers/dri2/egl_dri2.h
+++ b/src/egl/drivers/dri2/egl_dri2.h
@@ -175,6 +175,7 @@ struct dri2_egl_surface
    int                    dx;
    int                    dy;
    struct wl_callback    *frame_callback;
+   struct wl_callback    *throttle_callback;
    int			  format;
 #endif
 
@@ -221,6 +222,12 @@ struct dri2_egl_image
    __DRIimage *dri_image;
 };
 
+/* From xmlpool/options.h, user exposed so should be stable */
+#define DRI_CONF_VBLANK_NEVER 0
+#define DRI_CONF_VBLANK_DEF_INTERVAL_0 1
+#define DRI_CONF_VBLANK_DEF_INTERVAL_1 2
+#define DRI_CONF_VBLANK_ALWAYS_SYNC 3
+
 /* standard typecasts */
 _EGL_DRIVER_STANDARD_TYPECASTS(dri2_egl)
 _EGL_DRIVER_TYPECAST(dri2_egl_image, _EGLImage, obj)
diff --git a/src/egl/drivers/dri2/platform_wayland.c b/src/egl/drivers/dri2/platform_wayland.c
index ffc5959..6ee6ffb 100644
--- a/src/egl/drivers/dri2/platform_wayland.c
+++ b/src/egl/drivers/dri2/platform_wayland.c
@@ -180,8 +180,16 @@ dri2_create_window_surface(_EGLDriver *drv, _EGLDisplay *disp,
 			   _EGLConfig *conf, EGLNativeWindowType window,
 			   const EGLint *attrib_list)
 {
-   return dri2_create_surface(drv, disp, EGL_WINDOW_BIT, conf,
+   struct dri2_egl_display *dri2_dpy = dri2_egl_display(disp);
+   _EGLSurface *surf;
+
+   surf = dri2_create_surface(drv, disp, EGL_WINDOW_BIT, conf,
 			      window, attrib_list);
+
+   if (surf != NULL)
+      drv->API.SwapInterval(drv, disp, surf, dri2_dpy->default_swap_interval);
+
+   return surf;
 }
 
 /**
@@ -216,6 +224,8 @@ dri2_destroy_surface(_EGLDriver *drv, _EGLDisplay *disp, _EGLSurface *surf)
 
    if (dri2_surf->frame_callback)
       wl_callback_destroy(dri2_surf->frame_callback);
+   if (dri2_surf->throttle_callback)
+      wl_callback_destroy(dri2_surf->throttle_callback);
 
    if (dri2_surf->base.Type == EGL_WINDOW_BIT) {
       dri2_surf->wl_win->private = NULL;
@@ -261,24 +271,46 @@ get_back_bo(struct dri2_egl_surface *dri2_surf, __DRIbuffer *buffer)
    __DRIimage *image;
    int i, name, pitch;
 
-   /* There might be a buffer release already queued that wasn't processed */
-   wl_display_dispatch_queue_pending(dri2_dpy->wl_dpy, dri2_dpy->wl_queue);
+   if (dri2_surf->throttle_callback == NULL) {
+      /* There might be a buffer release already queued that wasn't processed */
+      wl_display_dispatch_queue_pending(dri2_dpy->wl_dpy, dri2_dpy->wl_queue);
+   } else {
+      /* If we aren't throttling to the frame callbacks then the compositor
+       * may have sent a release event after the last attach so we'll wait
+       * until the sync for the commit request completes in order to have the
+       * best chance of reusing a buffer */
+      do {
+         if (wl_display_dispatch_queue(dri2_dpy->wl_dpy,
+                                       dri2_dpy->wl_queue) == -1)
+            return EGL_FALSE;
+      } while (dri2_surf->throttle_callback != NULL);
+   }
 
    if (dri2_surf->back == NULL) {
-      for (i = 0; i < ARRAY_SIZE(dri2_surf->color_buffers); i++) {
-         /* Get an unlocked buffer, preferrably one with a dri_buffer already
-          * allocated. */
-	 if (dri2_surf->color_buffers[i].locked)
-            continue;
-         if (dri2_surf->back == NULL)
-	    dri2_surf->back = &dri2_surf->color_buffers[i];
-         else if (dri2_surf->back->dri_image == NULL)
-	    dri2_surf->back = &dri2_surf->color_buffers[i];
+      while (1) {
+         for (i = 0; i < ARRAY_SIZE(dri2_surf->color_buffers); i++) {
+            /* Get an unlocked buffer, preferrably one with a dri_buffer
+             * already allocated. */
+            if (dri2_surf->color_buffers[i].locked)
+               continue;
+            if (dri2_surf->back == NULL)
+               dri2_surf->back = &dri2_surf->color_buffers[i];
+            else if (dri2_surf->back->dri_image == NULL)
+               dri2_surf->back = &dri2_surf->color_buffers[i];
+         }
+
+         if (dri2_surf->back != NULL)
+            break;
+
+         /* If we make it here then here then all of the buffers are locked.
+          * The compositor shouldn't be keeping so many buffers for a long
+          * time so we should be able to reliably wait for a release event */
+         if (wl_display_dispatch_queue(dri2_dpy->wl_dpy,
+                                       dri2_dpy->wl_queue) < 0)
+            return -1;
       }
    }
 
-   if (dri2_surf->back == NULL)
-      return -1;
    if (dri2_surf->back->dri_image == NULL) {
       dri2_surf->back->dri_image = 
          dri2_dpy->image->createImage(dri2_dpy->dri_screen,
@@ -452,6 +484,21 @@ static const struct wl_callback_listener frame_listener = {
 };
 
 static void
+wayland_throttle_callback(void *data,
+                          struct wl_callback *callback,
+                          uint32_t time)
+{
+   struct dri2_egl_surface *dri2_surf = data;
+
+   dri2_surf->throttle_callback = NULL;
+   wl_callback_destroy(callback);
+}
+
+static const struct wl_callback_listener throttle_listener = {
+   wayland_throttle_callback
+};
+
+static void
 create_wl_buffer(struct dri2_egl_surface *dri2_surf)
 {
    struct dri2_egl_display *dri2_dpy =
@@ -511,11 +558,14 @@ dri2_swap_buffers_with_damage(_EGLDriver *drv,
    if (ret < 0)
       return EGL_FALSE;
 
-   dri2_surf->frame_callback = wl_surface_frame(dri2_surf->wl_win->surface);
-   wl_callback_add_listener(dri2_surf->frame_callback,
-                            &frame_listener, dri2_surf);
-   wl_proxy_set_queue((struct wl_proxy *) dri2_surf->frame_callback,
-                      dri2_dpy->wl_queue);
+   if (draw->SwapInterval > 0) {
+      dri2_surf->frame_callback =
+         wl_surface_frame(dri2_surf->wl_win->surface);
+      wl_callback_add_listener(dri2_surf->frame_callback,
+                               &frame_listener, dri2_surf);
+      wl_proxy_set_queue((struct wl_proxy *) dri2_surf->frame_callback,
+                         dri2_dpy->wl_queue);
+   }
 
    for (i = 0; i < ARRAY_SIZE(dri2_surf->color_buffers); i++)
       if (dri2_surf->color_buffers[i].age > 0)
@@ -559,6 +609,18 @@ dri2_swap_buffers_with_damage(_EGLDriver *drv,
 
    wl_surface_commit(dri2_surf->wl_win->surface);
 
+   if (draw->SwapInterval == 0) {
+      /* If we're not throttling to the frame callback we'll at least throttle
+       * to sync events from the server so that it has a chance to send us
+       * buffer release events. */
+      dri2_surf->throttle_callback = wl_display_sync(dri2_dpy->wl_dpy);
+      wl_callback_add_listener(dri2_surf->throttle_callback,
+                               &throttle_listener, dri2_surf);
+      wl_proxy_set_queue((struct wl_proxy *) dri2_surf->throttle_callback,
+                         dri2_dpy->wl_queue);
+
+   }
+
    (*dri2_dpy->flush->flush)(dri2_surf->dri_drawable);
    (*dri2_dpy->flush->invalidate)(dri2_surf->dri_drawable);
 
@@ -802,6 +864,60 @@ static const struct wl_registry_listener registry_listener = {
    registry_handle_global_remove
 };
 
+static EGLBoolean
+dri2_swap_interval(_EGLDriver *drv,
+                   _EGLDisplay *disp,
+                   _EGLSurface *surf,
+                   EGLint interval)
+{
+   if (interval > surf->Config->MaxSwapInterval)
+      interval = surf->Config->MaxSwapInterval;
+   else if (interval < surf->Config->MinSwapInterval)
+      interval = surf->Config->MinSwapInterval;
+
+   surf->SwapInterval = interval;
+
+   return EGL_TRUE;
+}
+
+static void
+dri2_setup_swap_interval(struct dri2_egl_display *dri2_dpy)
+{
+   GLint vblank_mode = DRI_CONF_VBLANK_DEF_INTERVAL_1;
+
+   /* We can't use values greater than 1 on Wayland because we are using the
+    * frame callback to synchronise the frame and the only way we be sure to
+    * get a frame callback is to attach a new buffer. Therefore we can't just
+    * sit drawing nothing to wait until the next ‘n’ frame callbacks */
+
+   if (dri2_dpy->config)
+      dri2_dpy->config->configQueryi(dri2_dpy->dri_screen,
+                                     "vblank_mode", &vblank_mode);
+   switch (vblank_mode) {
+   case DRI_CONF_VBLANK_NEVER:
+      dri2_dpy->min_swap_interval = 0;
+      dri2_dpy->max_swap_interval = 0;
+      dri2_dpy->default_swap_interval = 0;
+      break;
+   case DRI_CONF_VBLANK_ALWAYS_SYNC:
+      dri2_dpy->min_swap_interval = 1;
+      dri2_dpy->max_swap_interval = 1;
+      dri2_dpy->default_swap_interval = 1;
+      break;
+   case DRI_CONF_VBLANK_DEF_INTERVAL_0:
+      dri2_dpy->min_swap_interval = 0;
+      dri2_dpy->max_swap_interval = 1;
+      dri2_dpy->default_swap_interval = 0;
+      break;
+   default:
+   case DRI_CONF_VBLANK_DEF_INTERVAL_1:
+      dri2_dpy->min_swap_interval = 0;
+      dri2_dpy->max_swap_interval = 1;
+      dri2_dpy->default_swap_interval = 1;
+      break;
+   }
+}
+
 EGLBoolean
 dri2_initialize_wayland(_EGLDriver *drv, _EGLDisplay *disp)
 {
@@ -817,6 +933,7 @@ dri2_initialize_wayland(_EGLDriver *drv, _EGLDisplay *disp)
    drv->API.DestroySurface = dri2_destroy_surface;
    drv->API.SwapBuffers = dri2_swap_buffers;
    drv->API.SwapBuffersWithDamageEXT = dri2_swap_buffers_with_damage;
+   drv->API.SwapInterval = dri2_swap_interval;
    drv->API.Terminate = dri2_terminate;
    drv->API.QueryBufferAge = dri2_query_buffer_age;
    drv->API.CreateWaylandBufferFromImageWL =
@@ -876,9 +993,13 @@ dri2_initialize_wayland(_EGLDriver *drv, _EGLDisplay *disp)
    dri2_dpy->extensions[2] = &use_invalidate.base;
    dri2_dpy->extensions[3] = NULL;
 
+   dri2_dpy->swap_available = EGL_TRUE;
+
    if (!dri2_create_screen(disp))
       goto cleanup_driver;
 
+   dri2_setup_swap_interval(dri2_dpy);
+
    /* The server shouldn't advertise WL_DRM_CAPABILITY_PRIME if the driver
     * doesn't have createImageFromFds, since we're using the same driver on
     * both sides.  We don't want crash if that happens anyway, so fall back to
diff --git a/src/egl/drivers/dri2/platform_x11.c b/src/egl/drivers/dri2/platform_x11.c
index ec76aec..f2cd4fc 100644
--- a/src/egl/drivers/dri2/platform_x11.c
+++ b/src/egl/drivers/dri2/platform_x11.c
@@ -39,12 +39,6 @@
 
 #include "egl_dri2.h"
 
-/* From xmlpool/options.h, user exposed so should be stable */
-#define DRI_CONF_VBLANK_NEVER 0
-#define DRI_CONF_VBLANK_DEF_INTERVAL_0 1
-#define DRI_CONF_VBLANK_DEF_INTERVAL_1 2
-#define DRI_CONF_VBLANK_ALWAYS_SYNC 3
-
 static void
 swrastCreateDrawable(struct dri2_egl_display * dri2_dpy,
                      struct dri2_egl_surface * dri2_surf,
-- 
1.8.3.1



More information about the mesa-dev mailing list