[Mesa-dev] [PATCH 2/3] radeon/compute: Implement PIPE_COMPUTE_CAP_MAX_COMPUTE_UNITS

[Alex Deucher]

On Mon, Jun 2, 2014 at 7:34 PM, Bruno Jimenez <brunojimen at gmail.com> wrote:
> On Mon, 2014-06-02 at 16:16 -0400, Alex Deucher wrote:
>> On Sat, May 31, 2014 at 7:13 AM, Bruno Jimenez <brunojimen at gmail.com> wrote:
>> > On Fri, 2014-05-30 at 19:33 -0400, Alex Deucher wrote:
>> >> On Fri, May 30, 2014 at 11:31 AM, Bruno Jiménez <brunojimen at gmail.com> wrote:
>> >> > The data has been extracted from:
>> >> > AMD Accelerated Parallel Processing OpenCL Programming Guide (rev 2.7)
>> >> > Appendix D: Device Parameters
>> >>
>> >> You should add a query for the number of compute units to the
>> >> RADEON_INFO ioctl and then just ask the kernel how many CUs/SIMDs the
>> >> hw has.  This will properly handle all boards (harvest, etc.) since we
>> >> can read the actual number of CUs off the GPU.
>> >>
>> >> Alex
>> >
>> > Hi,
>> >
>> > At first I tried to do so (as for the maximum clock frequency), but I
>> > couldn't find how to query that value, nor many docs about what I could
>> > ask the kernel for.
>> >
>> > I think I have found now the appropiate docs, and I will try again to
>> > query the kernel later.
>>
>> You'd need to add a new query.  It doesn't look like we expose this
>> yet.  The attached untested patch should mostly do the trick.
>>
>> Alex
>>
>
> Honestly, I would have never ever been able to come up with this. I
> tried quering for MAX_PIPES, MAX_SE and MAX_SH_PER_SE (only for SI), and
> multiplying them together. And it did work for my little CEDAR, but
> getting a 2 it's easy. And looking at what would return for other cards
> it didn't look so well.
>
> Should I try this patch on top of kernel 3.14.4? or should I use other
> version?

It was against Dave's drm-next, but it may apply to 3.14 as well.

Alex

>
> Thanks in advance and sorry for any inconvenience.
> Bruno
>
>>
>> >
>> > Sorry for any inconvenience.
>> > Bruno
>> >
>> >>
>> >> > ---
>> >> >  src/gallium/drivers/radeon/r600_pipe_common.c | 90 +++++++++++++++++++++++++++
>> >> >  1 file changed, 90 insertions(+)
>> >> >
>> >> > diff --git a/src/gallium/drivers/radeon/r600_pipe_common.c b/src/gallium/drivers/radeon/r600_pipe_common.c
>> >> > index 70c4d1a..c4abacd 100644
>> >> > --- a/src/gallium/drivers/radeon/r600_pipe_common.c
>> >> > +++ b/src/gallium/drivers/radeon/r600_pipe_common.c
>> >> > @@ -422,6 +422,89 @@ const char *r600_get_llvm_processor_name(enum radeon_family family)
>> >> >         }
>> >> >  }
>> >> >
>> >> > +static uint32_t radeon_max_compute_units(enum radeon_family family)
>> >> > +{
>> >> > +       switch (family) {
>> >> > +       case CHIP_CEDAR:
>> >> > +               return 2;
>> >> > +
>> >> > +       /* Redwood PRO2: 4
>> >> > +        * Redwood PRO:  5
>> >> > +        * Redwood XT:   5 */
>> >> > +       case CHIP_REDWOOD:
>> >> > +               return 4;
>> >> > +
>> >> > +       /* Juniper LE:  9
>> >> > +        * Juniper XT: 10 */
>> >> > +       case CHIP_JUNIPER:
>> >> > +               return 9;
>> >> > +
>> >> > +       /* Cypress LE:  14
>> >> > +        * Cypress PRO: 18
>> >> > +        * Cypress XT:  20 */
>> >> > +       case CHIP_CYPRESS:
>> >> > +               return 14;
>> >> > +
>> >> > +       case CHIP_HEMLOCK:
>> >> > +               return 40;
>> >> > +
>> >> > +       /* XXX: is Zacate really equal to Ontario?
>> >> > +        * Zacate E-350: 2
>> >> > +        * Zacate E-240: 2
>> >> > +        * Ontario C-50: 2
>> >> > +        * Ontario C-30: 2 */
>> >> > +       case CHIP_PALM:
>> >> > +               return 2;
>> >> > +
>> >> > +       /* Caicos:      2
>> >> > +        * Seymour LP:  2
>> >> > +        * Seymour PRO: 2
>> >> > +        * Seymour XT:  2
>> >> > +        * Seymour XTX: 2 */
>> >> > +       case CHIP_CAICOS:
>> >> > +               return 2;
>> >> > +
>> >> > +       /* Turks PRO:    6
>> >> > +        * Turks XT:     6
>> >> > +        * Whistler LP:  6
>> >> > +        * Whistler PRO: 6
>> >> > +        * Whistler XT:  6 */
>> >> > +       case CHIP_TURKS:
>> >> > +               return 6;
>> >> > +
>> >> > +       /* Barts LE:      10
>> >> > +        * Barts PRO:     12
>> >> > +        * Barts XT:      14
>> >> > +        * Blackcomb PRO: 12 */
>> >> > +       case CHIP_BARTS:
>> >> > +               return 10;
>> >> > +
>> >> > +       /* Cayman PRO: 22
>> >> > +        * Cayman XT:  24
>> >> > +        * Cayman Gemini: 48 */
>> >> > +       case CHIP_CAYMAN:
>> >> > +               return 22;
>> >> > +
>> >> > +       /* Verde PRO:  8
>> >> > +        * Verde XT:  10 */
>> >> > +       case CHIP_VERDE:
>> >> > +               return 8;
>> >> > +
>> >> > +       /* Pitcairn PRO: 16
>> >> > +        * Pitcairn XT:  20 */
>> >> > +       case CHIP_PITCAIRN:
>> >> > +               return 16;
>> >> > +
>> >> > +       /* Tahiti PRO: 28
>> >> > +        * Tahiti XT:  32 */
>> >> > +       case CHIP_TAHITI:
>> >> > +               return 28;
>> >> > +
>> >> > +       default:
>> >> > +               return 1;
>> >> > +       }
>> >> > +}
>> >> > +
>> >> >  static int r600_get_compute_param(struct pipe_screen *screen,
>> >> >          enum pipe_compute_cap param,
>> >> >          void *ret)
>> >> > @@ -519,6 +602,13 @@ static int r600_get_compute_param(struct pipe_screen *screen,
>> >> >                 }
>> >> >                 return sizeof(uint32_t);
>> >> >
>> >> > +       case PIPE_COMPUTE_CAP_MAX_COMPUTE_UNITS:
>> >> > +               if (ret) {
>> >> > +                       uint32_t *max_compute_units = ret;
>> >> > +                       *max_compute_units = radeon_max_compute_units(rscreen->family);
>> >> > +               }
>> >> > +               return sizeof(uint32_t);
>> >> > +
>> >> >         default:
>> >> >                 fprintf(stderr, "unknown PIPE_COMPUTE_CAP %d\n", param);
>> >> >                 return 0;
>> >> > --
>> >> > 1.9.3
>> >> >
>> >> > _______________________________________________
>> >> > mesa-dev mailing list
>> >> > mesa-dev at lists.freedesktop.org
>> >> > http://lists.freedesktop.org/mailman/listinfo/mesa-dev
>> >
>> >
>
>