[Mesa-dev] [PATCH 02/14] mesa/gallium: API settings / rasterization rules
David Heidelberger
david.heidelberger at ixit.cz
Mon Oct 20 05:37:45 PDT 2014
From: Christoph Bumiller <e0425955 at student.tuwien.ac.at>
D3D9 has different system coordinate, add neccessary infrastructure for it.
Signed-off-by: David Heidelberger <david.heidelberger at ixit.cz>
---
src/gallium/auxiliary/util/u_dump_state.c | 2 ++
src/gallium/docs/source/context.rst | 8 +++++-
src/gallium/docs/source/cso/rasterizer.rst | 38 ++++++++++++++++++++---------
src/gallium/docs/source/screen.rst | 2 ++
src/gallium/include/pipe/p_defines.h | 1 +
src/gallium/include/pipe/p_state.h | 1 +
src/mesa/state_tracker/st_atom_rasterizer.c | 4 ++-
src/mesa/state_tracker/st_atom_scissor.c | 2 +-
src/mesa/state_tracker/st_atom_viewport.c | 2 +-
src/mesa/state_tracker/st_cb_rasterpos.c | 2 +-
src/mesa/state_tracker/st_context.c | 3 +++
src/mesa/state_tracker/st_context.h | 1 +
src/mesa/state_tracker/st_glsl_to_tgsi.cpp | 7 ++++--
src/mesa/state_tracker/st_mesa_to_tgsi.c | 7 ++++--
14 files changed, 60 insertions(+), 20 deletions(-)
diff --git a/src/gallium/auxiliary/util/u_dump_state.c b/src/gallium/auxiliary/util/u_dump_state.c
index e6614d5..af53622 100644
--- a/src/gallium/auxiliary/util/u_dump_state.c
+++ b/src/gallium/auxiliary/util/u_dump_state.c
@@ -328,9 +328,11 @@ util_dump_rasterizer_state(FILE *stream, const struct pipe_rasterizer_state *sta
util_dump_member(stream, bool, state, line_last_pixel);
util_dump_member(stream, bool, state, flatshade_first);
util_dump_member(stream, bool, state, half_pixel_center);
+ util_dump_member(stream, bool, state, lower_left_origin);
util_dump_member(stream, bool, state, bottom_edge_rule);
util_dump_member(stream, bool, state, rasterizer_discard);
util_dump_member(stream, bool, state, depth_clip);
+ util_dump_member(stream, bool, state, clip_halfz);
util_dump_member(stream, uint, state, clip_plane_enable);
util_dump_member(stream, float, state, line_width);
diff --git a/src/gallium/docs/source/context.rst b/src/gallium/docs/source/context.rst
index 5861f46..5dfb5d9 100644
--- a/src/gallium/docs/source/context.rst
+++ b/src/gallium/docs/source/context.rst
@@ -78,7 +78,13 @@ objects. They all follow simple, one-method binding calls, e.g.
and y would be [xmin..xmax-1] and [ymin..ymax-1]. The number of scissors
should be the same as the number of set viewports and can be up to
PIPE_MAX_VIEWPORTS.
-* ``set_viewport_states``
+ The scissor rectangle is specified in screen coordinates and is therefore
+ affected by the lower_left_origin state in the :ref:`Rasterizer`.
+* ``set_viewport_states`` specifies the conversion of clip coordinates to
+ screen coordinates.
+ Where the pixel corresponding to the screen coordinate origin (0, 0)
+ is stored in a resource depends on the lower_left_origin state in the
+ :ref:`Rasterizer`.
Sampler Views
diff --git a/src/gallium/docs/source/cso/rasterizer.rst b/src/gallium/docs/source/cso/rasterizer.rst
index 8d473b8..81aab48 100644
--- a/src/gallium/docs/source/cso/rasterizer.rst
+++ b/src/gallium/docs/source/cso/rasterizer.rst
@@ -266,6 +266,16 @@ half_pixel_center
| |
0.5 +-----+
+lower_left_origin:
+ When this is true, the screen coordinate origin (0, 0) is considered to be
+ the lower left corner.
+ This means that a pixel with screen-space coordinates (0, 0) will be stored
+ at the last line (y = height - 1) of the resource storage as far as
+ operations like blit and transfers are concerned.
+ Note that scissor state is specified in screen coordinates.
+ This setting is only legal if PIPE_CAP_RASTERIZER_LOWER_LEFT_ORIGIN is true.
+ If this is set, bottom_edge_rule must be set to true as well.
+
bottom_edge_rule
Determines what happens when a pixel sample lies precisely on a triangle
edge.
@@ -274,15 +284,16 @@ bottom_edge_rule
lies on the *bottom edge* or *left edge* (e.g., OpenGL drawables)::
0 x
- 0 +--------------------->
- |
- | +-------------+
- | | |
- | | |
- | | |
- | +=============+
- |
- y V
+ 0 +---------------------> y ^ (if lower_left_origin is true)
+ | |
+ | +-------------+ | +=============+
+ | | | | | |
+ | | | | | |
+ | | | | | |
+ | +=============+ | +-------------+
+ | |
+ y V 0 +--------------------->
+ 0 x
When false, a pixel sample is considered to lie inside of a triangle if it
lies on the *top edge* or *left edge* (e.g., OpenGL FBOs, D3D)::
@@ -309,8 +320,13 @@ bottom_edge_rule
Actually all graphics APIs use a top-left rasterization rule for pixel
ownership, but their notion of top varies with the axis origin (which
- can be either at y = 0 or at y = height). Gallium instead always
- assumes that top is always at y=0.
+ can be either at y = 0 or at y = height).
+
+ If PIPE_CAP_RASTERIZER_LOWER_LEFT_ORIGIN is advertised, this setting
+ must be set to true if lower_left_origin is true.
+ (This is because some hardware only supports switching the edge rule
+ implicitly by flipping the origin, while other hardware has a setting
+ for the edge rule but cannot flip the origin.)
See also:
- http://msdn.microsoft.com/en-us/library/windows/desktop/cc627092.aspx
diff --git a/src/gallium/docs/source/screen.rst b/src/gallium/docs/source/screen.rst
index ba34ec8..b48ab09 100644
--- a/src/gallium/docs/source/screen.rst
+++ b/src/gallium/docs/source/screen.rst
@@ -193,6 +193,8 @@ The integer capabilities:
* ``PIPE_CAP_BUFFER_MAP_PERSISTENT_COHERENT``: Whether
PIPE_TRANSFER_PERSISTENT and PIPE_TRANSFER_COHERENT are supported
for buffers.
+* ``PIPE_CAP_RASTERIZER_LOWER_LEFT_ORIGIN``: Indicates whether the setting of
+ lower_left_origin in pipe_rasterizer_state is supported.
* ``PIPE_CAP_TEXTURE_QUERY_LOD``: Whether the ``LODQ`` instruction is
supported.
* ``PIPE_CAP_MIN_TEXTURE_GATHER_OFFSET``: The minimum offset that can be used
diff --git a/src/gallium/include/pipe/p_defines.h b/src/gallium/include/pipe/p_defines.h
index d9b1547..5faed67 100644
--- a/src/gallium/include/pipe/p_defines.h
+++ b/src/gallium/include/pipe/p_defines.h
@@ -571,6 +571,7 @@ enum pipe_cap {
PIPE_CAP_CONDITIONAL_RENDER_INVERTED = 108,
PIPE_CAP_MAX_VERTEX_ATTRIB_STRIDE = 109,
PIPE_CAP_SAMPLER_VIEW_TARGET = 110,
+ PIPE_CAP_RASTERIZER_LOWER_LEFT_ORIGIN = 111
};
#define PIPE_QUIRK_TEXTURE_BORDER_COLOR_SWIZZLE_NV50 (1 << 0)
diff --git a/src/gallium/include/pipe/p_state.h b/src/gallium/include/pipe/p_state.h
index 36d253c..7b9996d 100644
--- a/src/gallium/include/pipe/p_state.h
+++ b/src/gallium/include/pipe/p_state.h
@@ -113,6 +113,7 @@ struct pipe_rasterizer_state
unsigned flatshade_first:1;
unsigned half_pixel_center:1;
+ unsigned lower_left_origin:1;
unsigned bottom_edge_rule:1;
/**
diff --git a/src/mesa/state_tracker/st_atom_rasterizer.c b/src/mesa/state_tracker/st_atom_rasterizer.c
index a228538..a56a883 100644
--- a/src/mesa/state_tracker/st_atom_rasterizer.c
+++ b/src/mesa/state_tracker/st_atom_rasterizer.c
@@ -232,8 +232,10 @@ static void update_raster_state( struct st_context *st )
ctx->Color._ClampFragmentColor;
raster->half_pixel_center = 1;
- if (st_fb_orientation(ctx->DrawBuffer) == Y_0_TOP)
+ if (st_fb_orientation(ctx->DrawBuffer) == Y_0_TOP) {
raster->bottom_edge_rule = 1;
+ raster->lower_left_origin = st->use_rast_y_flip;
+ }
/* ST_NEW_RASTERIZER */
raster->rasterizer_discard = ctx->RasterDiscard;
diff --git a/src/mesa/state_tracker/st_atom_scissor.c b/src/mesa/state_tracker/st_atom_scissor.c
index b720309..b2ec41d 100644
--- a/src/mesa/state_tracker/st_atom_scissor.c
+++ b/src/mesa/state_tracker/st_atom_scissor.c
@@ -78,7 +78,7 @@ update_scissor( struct st_context *st )
/* Now invert Y if needed.
* Gallium drivers use the convention Y=0=top for surfaces.
*/
- if (st_fb_orientation(fb) == Y_0_TOP) {
+ if (!st->use_rast_y_flip && st_fb_orientation(fb) == Y_0_TOP) {
miny = fb->Height - scissor[i].maxy;
maxy = fb->Height - scissor[i].miny;
scissor[i].miny = miny;
diff --git a/src/mesa/state_tracker/st_atom_viewport.c b/src/mesa/state_tracker/st_atom_viewport.c
index 7584f9b..dd37ff1 100644
--- a/src/mesa/state_tracker/st_atom_viewport.c
+++ b/src/mesa/state_tracker/st_atom_viewport.c
@@ -46,7 +46,7 @@ update_viewport( struct st_context *st )
int i;
/* _NEW_BUFFERS
*/
- if (st_fb_orientation(ctx->DrawBuffer) == Y_0_TOP) {
+ if (!st->use_rast_y_flip && st_fb_orientation(ctx->DrawBuffer) == Y_0_TOP) {
/* Drawing to a window. The corresponding gallium surface uses
* Y=0=TOP but OpenGL is Y=0=BOTTOM. So we need to invert the viewport.
*/
diff --git a/src/mesa/state_tracker/st_cb_rasterpos.c b/src/mesa/state_tracker/st_cb_rasterpos.c
index 3707465..e825f96 100644
--- a/src/mesa/state_tracker/st_cb_rasterpos.c
+++ b/src/mesa/state_tracker/st_cb_rasterpos.c
@@ -143,7 +143,7 @@ rastpos_point(struct draw_stage *stage, struct prim_header *prim)
/* update raster pos */
pos = prim->v[0]->data[0];
ctx->Current.RasterPos[0] = pos[0];
- if (st_fb_orientation(ctx->DrawBuffer) == Y_0_TOP)
+ if (!st->use_rast_y_flip && st_fb_orientation(ctx->DrawBuffer) == Y_0_TOP)
ctx->Current.RasterPos[1] = height - pos[1]; /* invert Y */
else
ctx->Current.RasterPos[1] = pos[1];
diff --git a/src/mesa/state_tracker/st_context.c b/src/mesa/state_tracker/st_context.c
index 1723513..1858504 100644
--- a/src/mesa/state_tracker/st_context.c
+++ b/src/mesa/state_tracker/st_context.c
@@ -240,6 +240,9 @@ st_create_context_priv( struct gl_context *ctx, struct pipe_context *pipe,
st->has_time_elapsed =
screen->get_param(screen, PIPE_CAP_QUERY_TIME_ELAPSED);
+ st->use_rast_y_flip =
+ screen->get_param(screen, PIPE_CAP_RASTERIZER_LOWER_LEFT_ORIGIN);
+
/* GL limits and extensions */
st_init_limits(st->pipe->screen, &ctx->Const, &ctx->Extensions);
st_init_extensions(st->pipe->screen, &ctx->Const,
diff --git a/src/mesa/state_tracker/st_context.h b/src/mesa/state_tracker/st_context.h
index 58f14f9..857e448 100644
--- a/src/mesa/state_tracker/st_context.h
+++ b/src/mesa/state_tracker/st_context.h
@@ -91,6 +91,7 @@ struct st_context
boolean needs_texcoord_semantic;
boolean apply_texture_swizzle_to_border_color;
+ boolean use_rast_y_flip;
/* On old libGL's for linux we need to invalidate the drawables
* on glViewpport calls, this is set via a option.
diff --git a/src/mesa/state_tracker/st_glsl_to_tgsi.cpp b/src/mesa/state_tracker/st_glsl_to_tgsi.cpp
index a0da9f6..b18b6f0 100644
--- a/src/mesa/state_tracker/st_glsl_to_tgsi.cpp
+++ b/src/mesa/state_tracker/st_glsl_to_tgsi.cpp
@@ -4156,6 +4156,8 @@ struct st_translate {
unsigned procType; /**< TGSI_PROCESSOR_VERTEX/FRAGMENT */
+ boolean fs_coord_y_flip; /* whether to apply STATE_FB_WPOS_Y_TRANSFORM */
+
boolean error;
};
@@ -4655,7 +4657,7 @@ emit_wpos_adjustment( struct st_translate *t,
wpos_input,
ureg_scalar(wpostrans, 0),
ureg_scalar(wpostrans, 1));
- } else {
+ } else if (t->fs_coord_y_flip) {
/* MAD wpos_temp.y, wpos_input, wpostrans.zzzz, wpostrans.wwww
*/
ureg_MAD( ureg,
@@ -4743,7 +4745,7 @@ emit_wpos(struct st_context *st,
/* Fragment shader wants pixel center integer */
if (pscreen->get_param(pscreen, PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_INTEGER)) {
/* the driver supports pixel center integer */
- adjY[1] = 1.0f;
+ adjY[1] = (float)t->fs_coord_y_flip;
ureg_property_fs_coord_pixel_center(ureg, TGSI_FS_COORD_PIXEL_CENTER_INTEGER);
}
else if (pscreen->get_param(pscreen, PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_HALF_INTEGER)) {
@@ -4879,6 +4881,7 @@ st_translate_program(
t->inputMapping = inputMapping;
t->outputMapping = outputMapping;
t->ureg = ureg;
+ t->fs_coord_y_flip = !st_context(ctx)->use_rast_y_flip;
if (program->shader_program) {
for (i = 0; i < program->shader_program->NumUserUniformStorage; i++) {
diff --git a/src/mesa/state_tracker/st_mesa_to_tgsi.c b/src/mesa/state_tracker/st_mesa_to_tgsi.c
index 26a5f51..5659c08 100644
--- a/src/mesa/state_tracker/st_mesa_to_tgsi.c
+++ b/src/mesa/state_tracker/st_mesa_to_tgsi.c
@@ -93,6 +93,8 @@ struct st_translate {
unsigned procType; /**< TGSI_PROCESSOR_VERTEX/FRAGMENT */
+ boolean fs_coord_y_flip; /* whether to apply STATE_FB_WPOS_Y_TRANSFORM */
+
boolean error;
};
@@ -825,7 +827,7 @@ emit_wpos_adjustment( struct st_translate *t,
wpos_input,
ureg_scalar(wpostrans, 0),
ureg_scalar(wpostrans, 1));
- } else {
+ } else if (t->fs_coord_y_flip) {
/* MAD wpos_temp.y, wpos_input, wpostrans.zzzz, wpostrans.wwww
*/
ureg_MAD( ureg,
@@ -913,7 +915,7 @@ emit_wpos(struct st_context *st,
/* Fragment shader wants pixel center integer */
if (pscreen->get_param(pscreen, PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_INTEGER)) {
/* the driver supports pixel center integer */
- adjY[1] = 1.0f;
+ adjY[1] = (float)!t->fs_coord_y_flip;
ureg_property_fs_coord_pixel_center(ureg, TGSI_FS_COORD_PIXEL_CENTER_INTEGER);
}
else if (pscreen->get_param(pscreen, PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_HALF_INTEGER)) {
@@ -1033,6 +1035,7 @@ st_translate_mesa_program(
t->inputMapping = inputMapping;
t->outputMapping = outputMapping;
t->ureg = ureg;
+ t->fs_coord_y_flip = !st_context(ctx)->use_rast_y_flip;
/*_mesa_print_program(program);*/
--
2.1.2
More information about the mesa-dev
mailing list