[Mesa-dev] [PATCH 14/25] i965/fs: Implement image load, store and atomic.
Francisco Jerez
currojerez at riseup.net
Tue May 5 14:48:21 PDT 2015
v2: Drop VEC4 suport.
---
.../drivers/dri/i965/brw_fs_surface_builder.cpp | 216 +++++++++++++++++++++
src/mesa/drivers/dri/i965/brw_fs_surface_builder.h | 17 ++
2 files changed, 233 insertions(+)
diff --git a/src/mesa/drivers/dri/i965/brw_fs_surface_builder.cpp b/src/mesa/drivers/dri/i965/brw_fs_surface_builder.cpp
index 99b7d3b..d64f69a 100644
--- a/src/mesa/drivers/dri/i965/brw_fs_surface_builder.cpp
+++ b/src/mesa/drivers/dri/i965/brw_fs_surface_builder.cpp
@@ -926,3 +926,219 @@ namespace {
}
}
}
+
+namespace brw {
+ namespace image_access {
+ /**
+ * Load a vector from a surface of the given format and dimensionality
+ * at the given coordinates.
+ */
+ fs_reg
+ emit_image_load(const fs_builder &bld,
+ const fs_reg &image, const fs_reg &addr,
+ mesa_format format, unsigned dims)
+ {
+ using namespace image_format_info;
+ using namespace image_format_conversion;
+ using namespace image_validity;
+ using namespace image_coordinates;
+ using namespace surface_access;
+ const brw_device_info *devinfo = bld.devinfo;
+ const mesa_format lower_format =
+ brw_lower_mesa_image_format(devinfo, format);
+ fs_reg tmp;
+
+ if (has_matching_typed_format(devinfo, format)) {
+ /* Hopefully we get here most of the time... */
+ tmp = emit_typed_read(bld, image, addr, dims,
+ _mesa_format_num_components(lower_format));
+ } else {
+ /* Untyped surface reads return 32 bits of the surface per
+ * component, without any sort of unpacking or type conversion,
+ */
+ const unsigned size = _mesa_get_format_bytes(format) / 4;
+
+ /* they don't properly handle out of bounds access, so we have to
+ * check manually if the coordinates are valid and predicate the
+ * surface read on the result,
+ */
+ const brw_predicate pred =
+ emit_bounds_check(bld, image, addr, dims);
+
+ /* and they don't know about surface coordinates, we need to
+ * convert them to a raw memory offset.
+ */
+ const fs_reg laddr = emit_address_calculation(bld, image, addr, dims);
+
+ tmp = emit_untyped_read(bld, image, laddr, 1, size, pred);
+
+ /* An out of bounds surface access should give zero as result. */
+ for (unsigned c = 0; c < 4; ++c)
+ exec_predicate(pred, bld.SEL(offset(tmp, c),
+ offset(tmp, c), fs_reg(0)));
+ }
+
+ /* Set the register type to D instead of UD if the data type is
+ * represented as a signed integer in memory so that sign extension
+ * is handled correctly by unpack.
+ */
+ if (needs_sign_extension(format))
+ tmp = retype(tmp, BRW_REGISTER_TYPE_D);
+
+ if (!has_supported_bit_layout(devinfo, format)) {
+ /* Unpack individual vector components from the bitfield if the
+ * hardware is unable to do it for us.
+ */
+ if (has_split_bit_layout(devinfo, format))
+ tmp = emit_pack(bld, tmp, get_bit_shifts(lower_format),
+ get_bit_widths(lower_format));
+ else
+ tmp = emit_unpack(bld, tmp, get_bit_shifts(format),
+ get_bit_widths(format));
+
+ } else if ((needs_sign_extension(format) &&
+ !is_conversion_trivial(devinfo, format)) ||
+ has_undefined_high_bits(devinfo, format)) {
+ /* Perform a trivial unpack even though the bit layout matches in
+ * order to get the most significant bits of each component
+ * initialized properly.
+ */
+ tmp = emit_unpack(bld, tmp, color_u(0, 32, 64, 96),
+ get_bit_widths(format));
+ }
+
+ if (!_mesa_is_format_integer(format)) {
+ if (is_conversion_trivial(devinfo, format)) {
+ /* Just need to cast the vector to the target type. */
+ tmp = retype(tmp, BRW_REGISTER_TYPE_F);
+ } else {
+ /* Do the right sort of type conversion to float. */
+ if (_mesa_get_format_datatype(format) == GL_FLOAT)
+ tmp = emit_convert_from_float(
+ bld, tmp, get_bit_widths(format));
+ else
+ tmp = emit_convert_from_scaled(
+ bld, tmp, get_bit_widths(format),
+ _mesa_is_format_signed(format));
+ }
+ }
+
+ /* Initialize missing components of the result. */
+ return emit_pad(bld, tmp, get_bit_widths(format));
+ }
+
+ /**
+ * Store a vector in a surface of the given format and dimensionality at
+ * the given coordinates.
+ */
+ void
+ emit_image_store(const fs_builder &bld, const fs_reg &image,
+ const fs_reg &addr, const fs_reg &src,
+ mesa_format format, unsigned dims)
+ {
+ using namespace image_format_info;
+ using namespace image_format_conversion;
+ using namespace image_validity;
+ using namespace image_coordinates;
+ using namespace surface_access;
+ const brw_device_info *devinfo = bld.devinfo;
+
+ if (format == MESA_FORMAT_NONE) {
+ /* We don't know what the format is, but that's fine because it
+ * implies write-only access, and typed surface writes are always
+ * able to take care of type conversion and packing for us.
+ */
+ emit_typed_write(bld, image, addr, src, dims, 4);
+
+ } else {
+ const mesa_format lower_format =
+ brw_lower_mesa_image_format(devinfo, format);
+ fs_reg tmp = src;
+
+ if (!is_conversion_trivial(devinfo, format)) {
+ /* Do the right sort of type conversion. */
+ if (_mesa_get_format_datatype(format) == GL_FLOAT)
+ tmp = emit_convert_to_float(bld, tmp, get_bit_widths(format));
+
+ else if (_mesa_is_format_integer(format))
+ tmp = emit_convert_to_integer(bld, tmp, get_bit_widths(format),
+ _mesa_is_format_signed(format));
+
+ else
+ tmp = emit_convert_to_scaled(bld, tmp, get_bit_widths(format),
+ _mesa_is_format_signed(format));
+ }
+
+ /* We're down to bit manipulation at this point. */
+ tmp = retype(tmp, BRW_REGISTER_TYPE_UD);
+
+ if (!has_supported_bit_layout(devinfo, format)) {
+ /* Pack the vector components into a bitfield if the hardware
+ * is unable to do it for us.
+ */
+ if (has_split_bit_layout(devinfo, format))
+ tmp = emit_unpack(bld, tmp, get_bit_shifts(lower_format),
+ get_bit_widths(lower_format));
+
+ else
+ tmp = emit_pack(bld, tmp, get_bit_shifts(format),
+ get_bit_widths(format));
+ }
+
+ if (has_matching_typed_format(devinfo, format)) {
+ /* Hopefully we get here most of the time... */
+ emit_typed_write(bld, image, addr, tmp, dims,
+ _mesa_format_num_components(lower_format));
+
+ } else {
+ /* Untyped surface writes store 32 bits of the surface per
+ * component, without any sort of packing or type conversion,
+ */
+ const unsigned size = _mesa_get_format_bytes(format) / 4;
+
+ /* they don't properly handle out of bounds access, so we have
+ * to check manually if the coordinates are valid and predicate
+ * the surface write on the result,
+ */
+ const brw_predicate pred =
+ emit_bounds_check(bld, image, addr, dims);
+
+ /* and, phew, they don't know about surface coordinates, we
+ * need to convert them to a raw memory offset.
+ */
+ const fs_reg laddr = emit_address_calculation(bld, image, addr, dims);
+
+ emit_untyped_write(bld, image, laddr, tmp, 1, size, pred);
+ }
+ }
+ }
+
+ /**
+ * Perform an atomic read-modify-write operation in a surface of the
+ * given dimensionality at the given coordinates. Main building block
+ * of the imageAtomic GLSL built-ins.
+ */
+ fs_reg
+ emit_image_atomic(const fs_builder &bld,
+ const fs_reg &image, const fs_reg &addr,
+ const fs_reg &src0, const fs_reg &src1,
+ unsigned dims, unsigned rsize, unsigned op)
+ {
+ using namespace image_validity;
+ using namespace image_coordinates;
+ using namespace surface_access;
+ /* Avoid performing an atomic operation on an unbound surface. */
+ const brw_predicate pred = emit_surface_check(bld, image);
+
+ /* Thankfully we can do without untyped atomics here. */
+ const fs_reg tmp = emit_typed_atomic(bld, image, addr, src0, src1,
+ dims, rsize, op, pred);
+
+ /* An unbound surface access should give zero as result. */
+ if (rsize)
+ exec_predicate(pred, bld.SEL(tmp, tmp, fs_reg(0)));
+
+ return tmp;
+ }
+ }
+}
diff --git a/src/mesa/drivers/dri/i965/brw_fs_surface_builder.h b/src/mesa/drivers/dri/i965/brw_fs_surface_builder.h
index e3cceeb..ebb6c68 100644
--- a/src/mesa/drivers/dri/i965/brw_fs_surface_builder.h
+++ b/src/mesa/drivers/dri/i965/brw_fs_surface_builder.h
@@ -212,5 +212,22 @@ namespace brw {
_mesa_get_format_datatype(format) == GL_INT);
}
}
+
+ namespace image_access {
+ fs_reg
+ emit_image_load(const fs_builder &bld,
+ const fs_reg &image, const fs_reg &addr,
+ mesa_format format, unsigned dims);
+
+ void
+ emit_image_store(const fs_builder &bld, const fs_reg &image,
+ const fs_reg &addr, const fs_reg &src,
+ mesa_format format, unsigned dims);
+ fs_reg
+ emit_image_atomic(const fs_builder &bld,
+ const fs_reg &image, const fs_reg &addr,
+ const fs_reg &src0, const fs_reg &src1,
+ unsigned dims, unsigned rsize, unsigned op);
+ }
}
#endif
--
2.3.5
More information about the mesa-dev
mailing list