[Mesa-dev] [PATCH 00/11] TGSI support for input and output array declarations

[Roland Scheidegger]

Overall, this looks like a good idea to me. Probably needs some changes
in our internal code but the idea is quite sane.

Roland

Am 24.05.2015 um 13:19 schrieb Marek Olšák:
> Hi,
> 
> The reason I add this is that TGSI doesn't allow indirect indexing of inputs and outputs. Consider this:
> 
> MOV OUT[ADDR[0]-1000], IMM[0]
> 
> There is no way to know where the output array starts here. It could be for example OUT[6]=GENERIC4 or anything else. The problem is some outputs are physically stored in a different memory domain than others. Per-patch (tessellation) outputs are one such example. Does the MOV instruction write a per-vertex or per-patch output? There is no way to know.
> 
> The problem can be avoided by using carefully-generated unoptimized TGSI where the relative index is the same as the base of the array, which is OUT[6] here:
> 
> UADD TEMP[0].x, TEMP[0].x, -1006
> UARL ADDR[0], TEMP[0].x
> MOV OUT[ADDR[0]+6], IMM[0]
> 
> This hack helps for this case, but the drivers which do move outputs to temps are still unable to allocate registers efficiently, because there is no way to know the actual array size.
> 
> This patch series adds proper TGSI support for IN/OUT arrays. It works in the same way as temp arrays and it's a requirement for tessellation.
> 
> Please review.
> 
> Marek
> _______________________________________________
> mesa-dev mailing list
> mesa-dev at lists.freedesktop.org
> https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.freedesktop.org_mailman_listinfo_mesa-2Ddev&d=BQIGaQ&c=Sqcl0Ez6M0X8aeM67LKIiDJAXVeAw-YihVMNtXt-uEs&r=Vjtt0vs_iqoI31UfJxBl7yv9I2FeiaeAYgMTLKRBc_I&m=dS0ucK9FuuSdcbnt4s0qhRBgFja_cLvjtixh9CaYjPc&s=ta_2hl9KvbY_ta-8iuUigKSHVWY1HsYcyPczQmh_c8s&e= 
>