[Mesa-dev] [PATCH v5 5/7] glsl: Add precision information to ir_variable
Samuel Iglesias Gonsálvez
siglesias at igalia.com
Wed Nov 11 04:45:49 PST 2015
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias at igalia.com>
On 06/11/15 13:03, Tapani Pälli wrote:
> From: Iago Toral Quiroga <itoral at igalia.com>
>
> We will need this later on when we implement proper support for
> precision qualifiers in the drivers and also to do link time checks for
> uniforms as indicated by the spec.
>
> This patch also adds compile-time checks for variables without precision
> information (currently, Mesa only checks that a default precision is set
> for floats in fragment shaders).
>
> As indicated by Ian, the addition of the precision information to
> ir_variable has been done using a bitfield and pahole to identify an
> available hole so that memory requirements for ir_variable stay the
> same.
>
> v2 (Ian):
> - Avoid if-ladders by defining arrays of supported sampler names and
> indexing
> into them with type->sampler_array + 2 * type->sampler_shadow
> - Make the code that selects the precision qualifier to use an utility
> function
> - Fix a typo
>
> v3 (Tapani):
> - rebased
> - squashed in "Precision qualifiers are not allowed on structs"
> - fixed select_gles_precision for sampler arrays
> - fixed precision_qualifier_allowed for arrays of structs
>
> v4 (Tapani):
> - add atomic_uint handling
> - do not allow precision qualifier on images
> (issues reported by Marta)
>
> v5 (Tapani):
> - support precision qualifier on image types
> ---
> src/glsl/ast_to_hir.cpp | 296 ++++++++++++++++++++++++++++++++++++++++----
> src/glsl/ir.h | 13 ++
> src/glsl/nir/glsl_types.cpp | 4 +
> src/glsl/nir/glsl_types.h | 11 ++
> 4 files changed, 301 insertions(+), 23 deletions(-)
>
> diff --git a/src/glsl/ast_to_hir.cpp b/src/glsl/ast_to_hir.cpp
> index b6d662b..1240615 100644
> --- a/src/glsl/ast_to_hir.cpp
> +++ b/src/glsl/ast_to_hir.cpp
> @@ -2189,10 +2189,10 @@ precision_qualifier_allowed(const glsl_type *type)
> * From this, we infer that GLSL 1.30 (and later) should allow precision
> * qualifiers on sampler types just like float and integer types.
> */
> - return type->is_float()
> + return (type->is_float()
> || type->is_integer()
> - || type->is_record()
> - || type->contains_opaque();
> + || type->contains_opaque())
> + && !type->without_array()->is_record();
> }
>
> const glsl_type *
> @@ -2210,31 +2210,268 @@ ast_type_specifier::glsl_type(const char **name,
> return type;
> }
>
> -const glsl_type *
> -ast_fully_specified_type::glsl_type(const char **name,
> - struct _mesa_glsl_parse_state *state) const
> +/**
> + * From the OpenGL ES 3.0 spec, 4.5.4 Default Precision Qualifiers:
> + *
> + * "The precision statement
> + *
> + * precision precision-qualifier type;
> + *
> + * can be used to establish a default precision qualifier. The type field can
> + * be either int or float or any of the sampler types, (...) If type is float,
> + * the directive applies to non-precision-qualified floating point type
> + * (scalar, vector, and matrix) declarations. If type is int, the directive
> + * applies to all non-precision-qualified integer type (scalar, vector, signed,
> + * and unsigned) declarations."
> + *
> + * We use the symbol table to keep the values of the default precisions for
> + * each 'type' in each scope and we use the 'type' string from the precision
> + * statement as key in the symbol table. When we want to retrieve the default
> + * precision associated with a given glsl_type we need to know the type string
> + * associated with it. This is what this function returns.
> + */
> +static const char *
> +get_type_name_for_precision_qualifier(const glsl_type *type)
> {
> - const struct glsl_type *type = this->specifier->glsl_type(name, state);
> -
> - if (type == NULL)
> - return NULL;
> + switch (type->base_type) {
> + case GLSL_TYPE_FLOAT:
> + return "float";
> + case GLSL_TYPE_UINT:
> + case GLSL_TYPE_INT:
> + return "int";
> + case GLSL_TYPE_ATOMIC_UINT:
> + return "atomic_uint";
> + case GLSL_TYPE_IMAGE:
> + /* fallthrough */
> + case GLSL_TYPE_SAMPLER: {
> + const unsigned type_idx =
> + type->sampler_array + 2 * type->sampler_shadow;
> + const unsigned offset = type->base_type == GLSL_TYPE_SAMPLER ? 0 : 4;
> + assert(type_idx < 4);
> + switch (type->sampler_type) {
> + case GLSL_TYPE_FLOAT:
> + switch (type->sampler_dimensionality) {
> + case GLSL_SAMPLER_DIM_1D: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "sampler1D", "sampler1DArray",
> + "sampler1DShadow", "sampler1DArrayShadow"
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_2D: {
> + static const char *const names[8] = {
> + "sampler2D", "sampler2DArray",
> + "sampler2DShadow", "sampler2DArrayShadow",
> + "image2D", "image2DArray", NULL, NULL
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_3D: {
> + static const char *const names[8] = {
> + "sampler3D", NULL, NULL, NULL,
> + "image3D", NULL, NULL, NULL
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_CUBE: {
> + static const char *const names[8] = {
> + "samplerCube", "samplerCubeArray",
> + "samplerCubeShadow", "samplerCubeArrayShadow",
> + "imageCube", NULL, NULL, NULL
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_MS: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "sampler2DMS", "sampler2DMSArray", NULL, NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_RECT: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "samplerRect", NULL, "samplerRectShadow", NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_BUF: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "samplerBuffer", NULL, NULL, NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_EXTERNAL: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "samplerExternalOES", NULL, NULL, NULL
> + };
> + return names[type_idx];
> + }
> + default:
> + unreachable("Unsupported sampler/image dimensionality");
> + } /* sampler/image float dimensionality */
> + break;
> + case GLSL_TYPE_INT:
> + switch (type->sampler_dimensionality) {
> + case GLSL_SAMPLER_DIM_1D: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "isampler1D", "isampler1DArray", NULL, NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_2D: {
> + static const char *const names[8] = {
> + "isampler2D", "isampler2DArray", NULL, NULL,
> + "iimage2D", "iimage2DArray", NULL, NULL
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_3D: {
> + static const char *const names[8] = {
> + "isampler3D", NULL, NULL, NULL,
> + "iimage3D", NULL, NULL, NULL
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_CUBE: {
> + static const char *const names[8] = {
> + "isamplerCube", "isamplerCubeArray", NULL, NULL,
> + "iimageCube", NULL, NULL, NULL
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_MS: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "isampler2DMS", "isampler2DMSArray", NULL, NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_RECT: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "isamplerRect", NULL, "isamplerRectShadow", NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_BUF: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "isamplerBuffer", NULL, NULL, NULL
> + };
> + return names[type_idx];
> + }
> + default:
> + unreachable("Unsupported isampler/iimage dimensionality");
> + } /* sampler/image int dimensionality */
> + break;
> + case GLSL_TYPE_UINT:
> + switch (type->sampler_dimensionality) {
> + case GLSL_SAMPLER_DIM_1D: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "usampler1D", "usampler1DArray", NULL, NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_2D: {
> + static const char *const names[8] = {
> + "usampler2D", "usampler2DArray", NULL, NULL,
> + "uimage2D", "uimage2DArray", NULL, NULL,
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_3D: {
> + static const char *const names[8] = {
> + "usampler3D", NULL, NULL, NULL,
> + "uimage3D", NULL, NULL, NULL,
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_CUBE: {
> + static const char *const names[8] = {
> + "usamplerCube", "usamplerCubeArray", NULL, NULL,
> + "uimageCube", NULL, NULL, NULL
> + };
> + return names[offset + type_idx];
> + }
> + case GLSL_SAMPLER_DIM_MS: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "usampler2DMS", "usampler2DMSArray", NULL, NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_RECT: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "usamplerRect", NULL, "usamplerRectShadow", NULL
> + };
> + return names[type_idx];
> + }
> + case GLSL_SAMPLER_DIM_BUF: {
> + assert(type->base_type == GLSL_TYPE_SAMPLER);
> + static const char *const names[4] = {
> + "usamplerBuffer", NULL, NULL, NULL
> + };
> + return names[type_idx];
> + }
> + default:
> + unreachable("Unsupported usampler/uimage dimensionality");
> + } /* sampler/image uint dimensionality */
> + break;
> + default:
> + unreachable("Unsupported sampler/image type");
> + } /* sampler/image type */
> + break;
> + } /* GLSL_TYPE_SAMPLER/GLSL_TYPE_IMAGE */
> + break;
> + default:
> + unreachable("Unsupported type");
> + } /* base type */
> +}
>
> - /* The fragment language does not define a default precision value
> - * for float types, so check that one is defined if the type declaration
> - * isn't providing one explictly.
> +static unsigned
> +select_gles_precision(unsigned qual_precision,
> + const glsl_type *type,
> + struct _mesa_glsl_parse_state *state, YYLTYPE *loc)
> +{
> + /* Precision qualifiers do not have any meaning in Desktop GLSL.
> + * In GLES we take the precision from the type qualifier if present,
> + * otherwise, if the type of the variable allows precision qualifiers at
> + * all, we look for the default precision qualifier for that type in the
> + * current scope.
> */
> - if (type->base_type == GLSL_TYPE_FLOAT
> - && state->es_shader
> - && state->stage == MESA_SHADER_FRAGMENT
> - && this->qualifier.precision == ast_precision_none
> - && state->symbols->get_default_precision_qualifier("float") == ast_precision_none) {
> - YYLTYPE loc = this->get_location();
> - _mesa_glsl_error(&loc, state,
> - "no precision specified this scope for type `%s'",
> - type->name);
> + assert(state->es_shader);
> +
> + unsigned precision = GLSL_PRECISION_NONE;
> + if (qual_precision) {
> + precision = qual_precision;
> + } else if (precision_qualifier_allowed(type)) {
> + const char *type_name =
> + get_type_name_for_precision_qualifier(type->without_array());
> + assert(type_name != NULL);
> +
> + precision =
> + state->symbols->get_default_precision_qualifier(type_name);
> + if (precision == ast_precision_none) {
> + _mesa_glsl_error(loc, state,
> + "No precision specified in this scope for type `%s'",
> + type->name);
> + }
> }
> + return precision;
> +}
>
> - return type;
> +const glsl_type *
> +ast_fully_specified_type::glsl_type(const char **name,
> + struct _mesa_glsl_parse_state *state) const
> +{
> + return this->specifier->glsl_type(name, state);
> }
>
> /**
> @@ -2772,6 +3009,12 @@ apply_type_qualifier_to_variable(const struct ast_type_qualifier *qual,
> if (qual->flags.q.sample)
> var->data.sample = 1;
>
> + /* Precision qualifiers do not hold any meaning in Desktop GLSL */
> + if (state->es_shader) {
> + var->data.precision =
> + select_gles_precision(qual->precision, var->type, state, loc);
> + }
> +
> if (state->stage == MESA_SHADER_GEOMETRY &&
> qual->flags.q.out && qual->flags.q.stream) {
> var->data.stream = qual->stream;
> @@ -6635,6 +6878,13 @@ ast_interface_block::hir(exec_list *instructions,
> if (var_mode == ir_var_shader_in || var_mode == ir_var_uniform)
> var->data.read_only = true;
>
> + /* Precision qualifiers do not have any meaning in Desktop GLSL */
> + if (state->es_shader) {
> + var->data.precision =
> + select_gles_precision(fields[i].precision, fields[i].type,
> + state, &loc);
> + }
> +
> if (fields[i].matrix_layout == GLSL_MATRIX_LAYOUT_INHERITED) {
> var->data.matrix_layout = matrix_layout == GLSL_MATRIX_LAYOUT_INHERITED
> ? GLSL_MATRIX_LAYOUT_COLUMN_MAJOR : matrix_layout;
> diff --git a/src/glsl/ir.h b/src/glsl/ir.h
> index 9c9f22d..b90451c 100644
> --- a/src/glsl/ir.h
> +++ b/src/glsl/ir.h
> @@ -770,6 +770,19 @@ public:
> unsigned index:1;
>
> /**
> + * Precision qualifier.
> + *
> + * In desktop GLSL we do not care about precision qualifiers at all, in
> + * fact, the spec says that precision qualifiers are ignored.
> + *
> + * To make things easy, we make it so that this field is always
> + * GLSL_PRECISION_NONE on desktop shaders. This way all the variables
> + * have the same precision value and the checks we add in the compiler
> + * for this field will never break a desktop shader compile.
> + */
> + unsigned precision:2;
> +
> + /**
> * \brief Layout qualifier for gl_FragDepth.
> *
> * This is not equal to \c ir_depth_layout_none if and only if this
> diff --git a/src/glsl/nir/glsl_types.cpp b/src/glsl/nir/glsl_types.cpp
> index 1c66dce..975b815 100644
> --- a/src/glsl/nir/glsl_types.cpp
> +++ b/src/glsl/nir/glsl_types.cpp
> @@ -162,6 +162,7 @@ glsl_type::glsl_type(const glsl_struct_field *fields, unsigned num_fields,
> this->fields.structure[i].sample = fields[i].sample;
> this->fields.structure[i].matrix_layout = fields[i].matrix_layout;
> this->fields.structure[i].patch = fields[i].patch;
> + this->fields.structure[i].precision = fields[i].precision;
> }
>
> mtx_unlock(&glsl_type::mutex);
> @@ -779,6 +780,9 @@ glsl_type::record_compare(const glsl_type *b) const
> if (this->fields.structure[i].image_restrict
> != b->fields.structure[i].image_restrict)
> return false;
> + if (this->fields.structure[i].precision
> + != b->fields.structure[i].precision)
> + return false;
> }
>
> return true;
> diff --git a/src/glsl/nir/glsl_types.h b/src/glsl/nir/glsl_types.h
> index 52ca826..54e5c47 100644
> --- a/src/glsl/nir/glsl_types.h
> +++ b/src/glsl/nir/glsl_types.h
> @@ -102,6 +102,13 @@ enum glsl_matrix_layout {
> GLSL_MATRIX_LAYOUT_ROW_MAJOR
> };
>
> +enum {
> + GLSL_PRECISION_NONE = 0,
> + GLSL_PRECISION_HIGH,
> + GLSL_PRECISION_MEDIUM,
> + GLSL_PRECISION_LOW
> +};
> +
> #ifdef __cplusplus
> #include "GL/gl.h"
> #include "util/ralloc.h"
> @@ -834,6 +841,10 @@ struct glsl_struct_field {
> */
> int stream;
>
> + /**
> + * Precision qualifier
> + */
> + unsigned precision;
>
> /**
> * Image qualifiers, applicable to buffer variables defined in shader
>
More information about the mesa-dev
mailing list