[Mesa-dev] [PATCH v2 06/42] i965: Import tables enumerating the set of validated L3 configurations.

Francisco Jerez currojerez at riseup.net
Wed Nov 25 05:45:56 PST 2015


Samuel Iglesias Gonsálvez <siglesias at igalia.com> writes:

> On 25/11/15 13:56, Samuel Iglesias Gonsálvez wrote:
>> 
>> 
>> On 25/11/15 13:20, Samuel Iglesias Gonsálvez wrote:
>>>
>>>
>>> On 18/11/15 06:54, Jordan Justen wrote:
>>>> From: Francisco Jerez <currojerez at riseup.net>
>>>>
>>>> It should be possible to use additional L3 configurations other than
>>>> the ones listed in the tables of validated allocations ("BSpec »
>>>> 3D-Media-GPGPU Engine » L3 Cache and URB [IVB+] » L3 Cache and URB [*]
>>>> » L3 Allocation and Programming"), but it seems sensible for now to
>>>> hard-code the tables in order to stick to the hardware docs.  Instead
>>>> of setting up the arbitrary L3 partitioning given as input, the
>>>> closest validated L3 configuration will be looked up in these tables
>>>> and used to program the hardware.
>>>>
>>>> The included tables should work for Gen7-9.  Note that the quantities
>>>> are specified in ways rather than in KB, this is because the L3
>>>> control registers expect the value in ways, and because by doing that
>>>> we can re-use a single table for all GT variants of the same
>>>> generation (and in the case of IVB/HSW and CHV/SKL across different
>>>> generations) which generally have different L3 way sizes but allow the
>>>> same combinations of way allocations.
>>>> ---
>>>>  src/mesa/drivers/dri/i965/Makefile.sources |   1 +
>>>>  src/mesa/drivers/dri/i965/gen7_l3_state.c  | 163 +++++++++++++++++++++++++++++
>>>>  2 files changed, 164 insertions(+)
>>>>  create mode 100644 src/mesa/drivers/dri/i965/gen7_l3_state.c
>>>>
>>>> diff --git a/src/mesa/drivers/dri/i965/Makefile.sources b/src/mesa/drivers/dri/i965/Makefile.sources
>>>> index 5a88d66..91901ad 100644
>>>> --- a/src/mesa/drivers/dri/i965/Makefile.sources
>>>> +++ b/src/mesa/drivers/dri/i965/Makefile.sources
>>>> @@ -184,6 +184,7 @@ i965_FILES = \
>>>>  	gen7_cs_state.c \
>>>>  	gen7_disable.c \
>>>>  	gen7_gs_state.c \
>>>> +	gen7_l3_state.c \
>>>>  	gen7_misc_state.c \
>>>>  	gen7_sf_state.c \
>>>>  	gen7_sol_state.c \
>>>> diff --git a/src/mesa/drivers/dri/i965/gen7_l3_state.c b/src/mesa/drivers/dri/i965/gen7_l3_state.c
>>>> new file mode 100644
>>>> index 0000000..8f9ba5b
>>>> --- /dev/null
>>>> +++ b/src/mesa/drivers/dri/i965/gen7_l3_state.c
>>>> @@ -0,0 +1,163 @@
>>>> +/*
>>>> + * Copyright (c) 2015 Intel Corporation
>>>> + *
>>>> + * Permission is hereby granted, free of charge, to any person obtaining a
>>>> + * copy of this software and associated documentation files (the "Software"),
>>>> + * to deal in the Software without restriction, including without limitation
>>>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
>>>> + * and/or sell copies of the Software, and to permit persons to whom the
>>>> + * Software is furnished to do so, subject to the following conditions:
>>>> + *
>>>> + * The above copyright notice and this permission notice (including the next
>>>> + * paragraph) shall be included in all copies or substantial portions of the
>>>> + * Software.
>>>> + *
>>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>>>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>>>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
>>>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>>>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
>>>> + * IN THE SOFTWARE.
>>>> + */
>>>> +
>>>> +#include "brw_context.h"
>>>> +#include "brw_defines.h"
>>>> +#include "brw_state.h"
>>>> +#include "intel_batchbuffer.h"
>>>> +
>>>> +/**
>>>> + * Chunk of L3 cache reserved for some specific purpose.
>>>> + */
>>>> +enum brw_l3_partition {
>>>> +   /** Shared local memory. */
>>>> +   L3P_SLM = 0,
>>>> +   /** Unified return buffer. */
>>>> +   L3P_URB,
>>>> +   /** Union of DC and RO. */
>>>> +   L3P_ALL,
>>>> +   /** Data cluster RW partition. */
>>>> +   L3P_DC,
>>>> +   /** Union of IS, C and T. */
>>>> +   L3P_RO,
>>>> +   /** Instruction and state cache. */
>>>> +   L3P_IS,
>>>> +   /** Constant cache. */
>>>> +   L3P_C,
>>>> +   /** Texture cache. */
>>>> +   L3P_T,
>>>> +   /** Number of supported L3 partitions. */
>>>> +   NUM_L3P
>>>> +};
>>>> +
>>>> +/**
>>>> + * L3 configuration represented as the number of ways allocated for each
>>>> + * partition.  \sa get_l3_way_size().
>>>> + */
>>>> +struct brw_l3_config {
>>>> +   unsigned n[NUM_L3P];
>>>> +};
>>>> +
>>>> +/**
>>>> + * IVB/HSW validated L3 configurations.
>>>> + */
>>>> +static const struct brw_l3_config ivb_l3_configs[] = {
>>>> +   {{  0, 32,  0,  0, 32,  0,  0,  0 }},
>>>> +   {{  0, 32,  0, 16, 16,  0,  0,  0 }},
>>>> +   {{  0, 32,  0,  4,  0,  8,  4, 16 }},
>>>> +   {{  0, 28,  0,  8,  0,  8,  4, 16 }},
>>>> +   {{  0, 28,  0, 16,  0,  8,  4,  8 }},
>>>> +   {{  0, 28,  0,  8,  0, 16,  4,  8 }},
>>>> +   {{  0, 28,  0,  0,  0, 16,  4, 16 }},
>>>> +   {{  0, 32,  0,  0,  0, 16,  0, 16 }},
>>>> +   {{  0, 28,  0,  4, 32,  0,  0,  0 }},
>
> I don't find this in IVB/HSW PRM docs...
>
>>>> +   {{ 16, 16,  0, 16, 16,  0,  0,  0 }},
>>>> +   {{ 16, 16,  0,  8,  0,  8,  8,  8 }},
>>>> +   {{ 16, 16,  0,  4,  0,  8,  4, 16 }},
>>>> +   {{ 16, 16,  0,  4,  0, 16,  4,  8 }},
>>>> +   {{ 16, 16,  0,  0, 32,  0,  0,  0 }},
>
> ...nor this one. Where are they defined?
>
Not sure if those are part of the PRMs, according to the internal
hardware docs (BSpec » 3D-Media-GPGPU Engine » L3 Cache and URB [IVB+] »
L3 Cache and URB [IVB,EXCLUDE(VLV)] » L3 Cache Allocation and
Programming [IVB]) those two were "validated as a later supported
configuration and can be utilized if desired".

> Sam
>
>>>> +   {{ 0 }}
>>>> +};
>>>> +
>>>
>>> This definition is wrong. It defines 15 elements when NUM_L3P value is 9.
>>>
>> 
>> Sorry, I read it wrongly. It is fine.
>> 
>> Sam
>> 
>>>> +/**
>>>> + * VLV validated L3 configurations.
>>>> + */
>>>> +static const struct brw_l3_config vlv_l3_configs[] = {
>>>> +   {{  0, 80,  0,  0, 16,  0,  0,  0 }},
>>>> +   {{  0, 80,  0,  8,  8,  0,  0,  0 }},
>>>> +   {{  0, 64,  0, 16, 16,  0,  0,  0 }},
>>>> +   {{  0, 64,  0,  0, 32,  0,  0,  0 }},
>>>> +   {{  0, 60,  0,  4, 32,  0,  0,  0 }},
>>>> +   {{ 32, 32,  0, 16, 16,  0,  0,  0 }},
>>>> +   {{ 32, 40,  0,  8, 16,  0,  0,  0 }},
>>>> +   {{ 32, 40,  0, 16,  8,  0,  0,  0 }},
>>>> +   {{ 0 }}
>>>> +};
>>>> +
>>>> +/**
>>>> + * BDW validated L3 configurations.
>>>> + */
>>>> +static const struct brw_l3_config bdw_l3_configs[] = {
>>>> +   {{  0, 48, 48,  0,  0,  0,  0,  0 }},
>>>> +   {{  0, 48,  0, 16, 32,  0,  0,  0 }},
>>>> +   {{  0, 32,  0, 16, 48,  0,  0,  0 }},
>>>> +   {{  0, 32,  0,  0, 64,  0,  0,  0 }},
>>>> +   {{  0, 32, 64,  0,  0,  0,  0,  0 }},
>>>> +   {{ 24, 16, 48,  0,  0,  0,  0,  0 }},
>>>> +   {{ 24, 16,  0, 16, 32,  0,  0,  0 }},
>>>> +   {{ 24, 16,  0, 32, 16,  0,  0,  0 }},
>>>> +   {{ 0 }}
>>>> +};
>>>> +
>>>> +/**
>>>> + * CHV/SKL validated L3 configurations.
>>>> + */
>>>> +static const struct brw_l3_config chv_l3_configs[] = {
>>>> +   {{  0, 48, 48,  0,  0,  0,  0,  0 }},
>>>> +   {{  0, 48,  0, 16, 32,  0,  0,  0 }},
>>>> +   {{  0, 32,  0, 16, 48,  0,  0,  0 }},
>>>> +   {{  0, 32,  0,  0, 64,  0,  0,  0 }},
>>>> +   {{  0, 32, 64,  0,  0,  0,  0,  0 }},
>>>> +   {{ 32, 16, 48,  0,  0,  0,  0,  0 }},
>>>> +   {{ 32, 16,  0, 16, 32,  0,  0,  0 }},
>>>> +   {{ 32, 16,  0, 32, 16,  0,  0,  0 }},
>>>> +   {{ 0 }}
>>>> +};
>>>> +
>>>> +/**
>>>> + * Return a zero-terminated array of validated L3 configurations for the
>>>> + * specified device.
>>>> + */
>>>> +static const struct brw_l3_config *
>>>> +get_l3_configs(const struct brw_device_info *devinfo)
>>>> +{
>>>> +   switch (devinfo->gen) {
>>>> +   case 7:
>>>> +      return (devinfo->is_baytrail ? vlv_l3_configs : ivb_l3_configs);
>>>> +
>>>> +   case 8:
>>>> +      return (devinfo->is_cherryview ? chv_l3_configs : bdw_l3_configs);
>>>> +
>>>> +   case 9:
>>>> +      return chv_l3_configs;
>>>> +
>>>> +   default:
>>>> +      unreachable("Not implemented");
>>>> +   }
>>>> +}
>>>> +
>>>> +/**
>>>> + * Return the size of an L3 way in KB.
>>>> + */
>>>> +static unsigned
>>>> +get_l3_way_size(const struct brw_device_info *devinfo)
>>>> +{
>>>> +   if (devinfo->is_baytrail)
>>>> +      return 2;
>>>> +
>>>> +   else if (devinfo->is_cherryview)
>>>> +      return 4;
>>>> +
>>>> +   else
>>>> +      return 2 << devinfo->gt;
>>>> +}
>>>>
>>> _______________________________________________
>>> mesa-dev mailing list
>>> mesa-dev at lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/mesa-dev
>>>
>> _______________________________________________
>> mesa-dev mailing list
>> mesa-dev at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/mesa-dev
>> 
> _______________________________________________
> mesa-dev mailing list
> mesa-dev at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/mesa-dev
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 212 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/mesa-dev/attachments/20151125/d487bb8f/attachment-0001.sig>


More information about the mesa-dev mailing list