[Mesa-dev] [PATCH v3 10/24] nv50/ir: re-introduce TGSI lowering pass for images

[Ilia Mirkin]

Reviewed-by: Ilia Mirkin <imirkin at alum.mit.edu>

On Tue, Apr 26, 2016 at 12:52 PM, Samuel Pitoiset
<samuel.pitoiset at gmail.com> wrote:
> This is loosely based on the previous lowering pass wrote by calim
> four years ago. I did clean the code and fixed some issues.
>
> v3: use getDst(0) for STORE indirect accesses
> v2: drop .raw code which is unused for now
>
> Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
> ---
>  .../drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp  | 97 +++++++++++++++++++++-
>  1 file changed, 94 insertions(+), 3 deletions(-)
>
> diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp b/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
> index dc08ad3..22aea71 100644
> --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
> +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
> @@ -1449,7 +1449,7 @@ private:
>     void handleUserClipPlanes();
>
>     // Symbol *getResourceBase(int r);
> -   // void getResourceCoords(std::vector<Value *>&, int r, int s);
> +   void getImageCoords(std::vector<Value *>&, int r, int s);
>
>     void handleLOAD(Value *dst0[4]);
>     void handleSTORE();
> @@ -2255,7 +2255,7 @@ Converter::getResourceCoords(std::vector<Value *> &coords, int r, int s)
>        coords[0] = mkOp1v(OP_MOV, TYPE_U32, getScratch(4, FILE_ADDRESS),
>                           coords[0]);
>  }
> -
> +*/
>  static inline int
>  partitionLoadStore(uint8_t comp[2], uint8_t size[2], uint8_t mask)
>  {
> @@ -2280,7 +2280,30 @@ partitionLoadStore(uint8_t comp[2], uint8_t size[2], uint8_t mask)
>     }
>     return n + 1;
>  }
> -*/
> +
> +static inline nv50_ir::TexTarget
> +getImageTarget(const tgsi::Source *code, int r)
> +{
> +   return tgsi::translateTexture(code->images.at(r).target);
> +}
> +
> +static inline const nv50_ir::TexInstruction::ImgFormatDesc *
> +getImageFormat(const tgsi::Source *code, int r)
> +{
> +   return &nv50_ir::TexInstruction::formatTable[
> +      tgsi::translateImgFormat(code->images.at(r).format)];
> +}
> +
> +void
> +Converter::getImageCoords(std::vector<Value *> &coords, int r, int s)
> +{
> +   TexInstruction::Target t =
> +      TexInstruction::Target(getImageTarget(code, r));
> +   const int arg = t.getDim() + (t.isArray() || t.isCube());
> +
> +   for (int c = 0; c < arg; ++c)
> +      coords.push_back(fetchSrc(s, c));
> +}
>
>  // For raw loads, granularity is 4 byte.
>  // Usage of the texture read mask on OP_SULDP is not allowed.
> @@ -2314,6 +2337,33 @@ Converter::handleLOAD(Value *dst0[4])
>              ld->setIndirect(0, 1, fetchSrc(tgsi.getSrc(0).getIndirect(0), 0, 0));
>        }
>        break;
> +   case TGSI_FILE_IMAGE: {
> +      assert(!code->images[r].raw);
> +
> +      getImageCoords(off, r, 1);
> +      def.resize(4);
> +
> +      for (c = 0; c < 4; ++c) {
> +         if (!dst0[c] || tgsi.getSrc(0).getSwizzle(c) != (TGSI_SWIZZLE_X + c))
> +            def[c] = getScratch();
> +         else
> +            def[c] = dst0[c];
> +      }
> +
> +      TexInstruction *ld =
> +         mkTex(OP_SULDP, getImageTarget(code, r), code->images[r].slot, 0,
> +               def, off);
> +      ld->tex.mask = tgsi.getDst(0).getMask();
> +      ld->tex.format = getImageFormat(code, r);
> +      ld->cache = tgsi.getCacheMode();
> +      if (tgsi.getSrc(0).isIndirect(0))
> +         ld->setIndirectR(fetchSrc(tgsi.getSrc(0).getIndirect(0), 0, NULL));
> +
> +      FOR_EACH_DST_ENABLED_CHANNEL(0, c, tgsi)
> +         if (dst0[c] != def[c])
> +            mkMov(dst0[c], def[tgsi.getSrc(0).getSwizzle(c)]);
> +      }
> +      break;
>     default:
>        assert(!"Unsupported srcFile for LOAD");
>     }
> @@ -2420,6 +2470,24 @@ Converter::handleSTORE()
>              st->setIndirect(0, 1, fetchSrc(tgsi.getDst(0).getIndirect(0), 0, 0));
>        }
>        break;
> +   case TGSI_FILE_IMAGE: {
> +      assert(!code->images[r].raw);
> +
> +      getImageCoords(off, r, 0);
> +      src = off;
> +
> +      FOR_EACH_DST_ENABLED_CHANNEL(0, c, tgsi)
> +         src.push_back(fetchSrc(1, c));
> +
> +      TexInstruction *st =
> +         mkTex(OP_SUSTP, getImageTarget(code, r), code->images[r].slot,
> +               0, dummy, src);
> +      st->tex.mask = tgsi.getDst(0).getMask();
> +      st->cache = tgsi.getCacheMode();
> +      if (tgsi.getDst(0).isIndirect(0))
> +         st->setIndirectR(fetchSrc(tgsi.getDst(0).getIndirect(0), 0, NULL));
> +      }
> +      break;
>     default:
>        assert(!"Unsupported dstFile for STORE");
>     }
> @@ -2518,6 +2586,29 @@ Converter::handleATOM(Value *dst0[4], DataType ty, uint16_t subOp)
>           if (dst0[c])
>              dst0[c] = dst; // not equal to rDst so handleInstruction will do mkMov
>        break;
> +   case TGSI_FILE_IMAGE: {
> +      assert(!code->images[r].raw);
> +
> +      getImageCoords(srcv, r, 1);
> +      defv.push_back(dst);
> +      srcv.push_back(fetchSrc(2, 0));
> +
> +      if (subOp == NV50_IR_SUBOP_ATOM_CAS)
> +         srcv.push_back(fetchSrc(3, 0));
> +
> +      TexInstruction *tex = mkTex(OP_SUREDP, getImageTarget(code, r),
> +                                  code->images[r].slot, 0, defv, srcv);
> +      tex->subOp = subOp;
> +      tex->tex.mask = 1;
> +      tex->setType(ty);
> +      if (tgsi.getSrc(0).isIndirect(0))
> +         tex->setIndirectR(fetchSrc(tgsi.getSrc(0).getIndirect(0), 0, NULL));
> +
> +      for (int c = 0; c < 4; ++c)
> +         if (dst0[c])
> +            dst0[c] = dst; // not equal to rDst so handleInstruction will do mkMov
> +      }
> +      break;
>     default:
>        assert(!"Unsupported srcFile for ATOM");
>     }
> --
> 2.8.0
>
> _______________________________________________
> mesa-dev mailing list
> mesa-dev at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/mesa-dev