[Mesa-dev] [PATCH v2 07/14] radeonsi: Add offchip buffer address calculation.
Bas Nieuwenhuizen
bas at basnieuwenhuizen.nl
Fri May 13 01:37:17 UTC 2016
Instead of creating a memory area per patch and per vertex, we put
the same attribute of every vertex & patch together. Most loads
and stores access the same attribute across all lanes, only for
different patches and vertices.
For the TCS this results in tightly packed data for 4-component
stores.
For the TES this is not the case as within a patch the loads
often also access the same vertex. However if there are < 4
vertices/patch, this still results in a reduction of the number
of cache lines. In the LDS situation we only do better than worst
case if the data per patch < 64 bytes, which due to the
tessellation factors is pretty much never.
We do not use hardware swizzling for this. It would slightly reduce
the number of executed VALU instructions, but I had issues with
increased wait times that I haven't been able to solve yet.
Furthermore, the tbuffer_store intrinsic does not support both
VGPR offset and an index, so we have a problem storing
indirectly indexed outputs. This can be solved by temporarily
storing arrays in LDS and then copying them, but I don't think
that is worth the effort. The difference in VALU cycles
hardware swizzling gives is about 0.2% of total busy cycles.
That is without handling the array case.
I chose for attributes instead of components as they are often
accessed together, and the software swizzling takes VALU cycles
for calculating offsets.
v2: - Rename functions to get_tcs_tes_buffer_address.
- multiply by 16 as late as possible.
- Use tgsi_full_src_register_from_dst.
- Remove some bad comments.
Signed-off-by: Bas Nieuwenhuizen <bas at basnieuwenhuizen.nl>
---
src/gallium/drivers/radeonsi/si_shader.c | 124 +++++++++++++++++++++++++++++++
1 file changed, 124 insertions(+)
diff --git a/src/gallium/drivers/radeonsi/si_shader.c b/src/gallium/drivers/radeonsi/si_shader.c
index 35b3db2c..46070ab 100644
--- a/src/gallium/drivers/radeonsi/si_shader.c
+++ b/src/gallium/drivers/radeonsi/si_shader.c
@@ -664,6 +664,130 @@ static LLVMValueRef get_dw_address(struct si_shader_context *ctx,
lp_build_const_int32(gallivm, param * 4), "");
}
+/* The offchip buffer layout for TCS->TES is
+ *
+ * - attribute 0 of patch 0 vertex 0
+ * - attribute 0 of patch 0 vertex 1
+ * - attribute 0 of patch 0 vertex 2
+ * ...
+ * - attribute 0 of patch 1 vertex 0
+ * - attribute 0 of patch 1 vertex 1
+ * ...
+ * - attribute 1 of patch 0 vertex 0
+ * - attribute 1 of patch 0 vertex 1
+ * ...
+ * - per patch attribute 0 of patch 0
+ * - per patch attribute 0 of patch 1
+ * ...
+ *
+ * Note that every attribute has 4 components.
+ */
+static LLVMValueRef get_tcs_tes_buffer_address(struct si_shader_context *ctx,
+ LLVMValueRef vertex_index,
+ LLVMValueRef param_index)
+{
+ struct gallivm_state *gallivm = ctx->radeon_bld.soa.bld_base.base.gallivm;
+ LLVMValueRef base_addr, vertices_per_patch, num_patches, total_vertices;
+ LLVMValueRef param_stride, constant16;
+
+ vertices_per_patch = unpack_param(ctx, SI_PARAM_TCS_OFFCHIP_LAYOUT, 9, 6);
+ num_patches = unpack_param(ctx, SI_PARAM_TCS_OFFCHIP_LAYOUT, 0, 9);
+ total_vertices = LLVMBuildMul(gallivm->builder, vertices_per_patch,
+ num_patches, "");
+
+ constant16 = lp_build_const_int32(gallivm, 16);
+ if (vertex_index) {
+ base_addr = LLVMBuildMul(gallivm->builder, get_rel_patch_id(ctx),
+ vertices_per_patch, "");
+
+ base_addr = LLVMBuildAdd(gallivm->builder, base_addr,
+ vertex_index, "");
+
+ param_stride = total_vertices;
+ } else {
+ base_addr = get_rel_patch_id(ctx);
+ param_stride = num_patches;
+ }
+
+ base_addr = LLVMBuildAdd(gallivm->builder, base_addr,
+ LLVMBuildMul(gallivm->builder, param_index,
+ param_stride, ""), "");
+
+ base_addr = LLVMBuildMul(gallivm->builder, base_addr, constant16, "");
+
+ if (!vertex_index) {
+ LLVMValueRef patch_data_offset =
+ unpack_param(ctx, SI_PARAM_TCS_OFFCHIP_LAYOUT, 16, 16);
+
+ base_addr = LLVMBuildAdd(gallivm->builder, base_addr,
+ patch_data_offset, "");
+ }
+ return base_addr;
+}
+
+static LLVMValueRef get_tcs_tes_buffer_address_from_reg(
+ struct si_shader_context *ctx,
+ const struct tgsi_full_dst_register *dst,
+ const struct tgsi_full_src_register *src)
+{
+ struct gallivm_state *gallivm = ctx->radeon_bld.soa.bld_base.base.gallivm;
+ struct tgsi_shader_info *info = &ctx->shader->selector->info;
+ ubyte *name, *index, *array_first;
+ struct tgsi_full_src_register reg;
+ LLVMValueRef vertex_index = NULL;
+ LLVMValueRef param_index = NULL;
+ unsigned param_index_base, param_base;
+
+ reg = src ? *src : tgsi_full_src_register_from_dst(dst);
+
+ if (reg.Register.Dimension) {
+
+ if (reg.Dimension.Indirect)
+ vertex_index = get_indirect_index(ctx, ®.DimIndirect,
+ reg.Dimension.Index);
+ else
+ vertex_index = lp_build_const_int32(gallivm,
+ reg.Dimension.Index);
+ }
+
+ /* Get information about the register. */
+ if (reg.Register.File == TGSI_FILE_INPUT) {
+ name = info->input_semantic_name;
+ index = info->input_semantic_index;
+ array_first = info->input_array_first;
+ } else if (reg.Register.File == TGSI_FILE_OUTPUT) {
+ name = info->output_semantic_name;
+ index = info->output_semantic_index;
+ array_first = info->output_array_first;
+ } else {
+ assert(0);
+ return NULL;
+ }
+
+ if (reg.Register.Indirect) {
+ if (reg.Indirect.ArrayID)
+ param_base = array_first[reg.Indirect.ArrayID];
+ else
+ param_base = reg.Register.Index;
+
+ param_index = get_indirect_index(ctx, ®.Indirect,
+ reg.Register.Index - param_base);
+
+ } else {
+ param_base = reg.Register.Index;
+ param_index = lp_build_const_int32(gallivm, 0);
+ }
+
+ param_index_base = si_shader_io_get_unique_index(name[param_base],
+ index[param_base]);
+
+ param_index = LLVMBuildAdd(gallivm->builder, param_index,
+ lp_build_const_int32(gallivm, param_index_base),
+ "");
+
+ return get_tcs_tes_buffer_address(ctx, vertex_index, param_index);
+}
+
/* TBUFFER_STORE_FORMAT_{X,XY,XYZ,XYZW} <- the suffix is selected by num_channels=1..4.
* The type of vdata must be one of i32 (num_channels=1), v2i32 (num_channels=2),
* or v4i32 (num_channels=3,4). */
--
2.8.2
More information about the mesa-dev
mailing list