[Mesa-dev] [3.1/22] i965/miptree: Take interleaving into account in stencil pitch
Topi Pohjolainen
topi.pohjolainen at gmail.com
Wed Jul 19 19:51:31 UTC 2017
This makes intel_mipmap_tree::pitch and isl_surf::row_pitch
semantically equivalent.
Signed-off-by: Topi Pohjolainen <topi.pohjolainen at intel.com>
---
src/mesa/drivers/dri/i965/gen7_misc_state.c | 12 +------
src/mesa/drivers/dri/i965/gen8_depth_state.c | 16 +--------
src/mesa/drivers/dri/i965/intel_mipmap_tree.c | 50 ++++++++++-----------------
3 files changed, 20 insertions(+), 58 deletions(-)
diff --git a/src/mesa/drivers/dri/i965/gen7_misc_state.c b/src/mesa/drivers/dri/i965/gen7_misc_state.c
index 6c69fa8ba5..e189788a88 100644
--- a/src/mesa/drivers/dri/i965/gen7_misc_state.c
+++ b/src/mesa/drivers/dri/i965/gen7_misc_state.c
@@ -170,19 +170,9 @@ gen7_emit_depth_stencil_hiz(struct brw_context *brw,
BEGIN_BATCH(3);
OUT_BATCH(GEN7_3DSTATE_STENCIL_BUFFER << 16 | (3 - 2));
- /* The stencil buffer has quirky pitch requirements. From the
- * Sandybridge PRM, Volume 2 Part 1, page 329 (3DSTATE_STENCIL_BUFFER
- * dword 1 bits 16:0 - Surface Pitch):
- *
- * The pitch must be set to 2x the value computed based on width, as
- * the stencil buffer is stored with two rows interleaved.
- *
- * While the Ivybridge PRM lacks this comment, the BSpec contains the
- * same text, and experiments indicate that this is necessary.
- */
OUT_BATCH(enabled |
mocs << 25 |
- (2 * stencil_mt->pitch - 1));
+ (stencil_mt->pitch - 1));
OUT_RELOC(stencil_mt->bo,
I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
0);
diff --git a/src/mesa/drivers/dri/i965/gen8_depth_state.c b/src/mesa/drivers/dri/i965/gen8_depth_state.c
index 52c6dd0787..d05e1ba32e 100644
--- a/src/mesa/drivers/dri/i965/gen8_depth_state.c
+++ b/src/mesa/drivers/dri/i965/gen8_depth_state.c
@@ -111,22 +111,8 @@ emit_depth_packets(struct brw_context *brw,
} else {
BEGIN_BATCH(5);
OUT_BATCH(GEN7_3DSTATE_STENCIL_BUFFER << 16 | (5 - 2));
- /* The stencil buffer has quirky pitch requirements. From the Graphics
- * BSpec: vol2a.11 3D Pipeline Windower > Early Depth/Stencil Processing
- * > Depth/Stencil Buffer State > 3DSTATE_STENCIL_BUFFER [DevIVB+],
- * field "Surface Pitch":
- *
- * The pitch must be set to 2x the value computed based on width, as
- * the stencil buffer is stored with two rows interleaved.
- *
- * (Note that it is not 100% clear whether this intended to apply to
- * Gen7; the BSpec flags this comment as "DevILK,DevSNB" (which would
- * imply that it doesn't), however the comment appears on a "DevIVB+"
- * page (which would imply that it does). Experiments with the hardware
- * indicate that it does.
- */
OUT_BATCH(HSW_STENCIL_ENABLED | mocs_wb << 22 |
- (2 * stencil_mt->pitch - 1));
+ (stencil_mt->pitch - 1));
OUT_RELOC64(stencil_mt->bo,
I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER, 0);
OUT_BATCH(stencil_mt ? stencil_mt->qpitch >> 2 : 0);
diff --git a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
index 925c67fc50..9244a35d4f 100644
--- a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
+++ b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
@@ -858,6 +858,18 @@ miptree_create(struct brw_context *brw,
mt->surf.tiling),
&mt->pitch,
alloc_flags);
+
+ /* The stencil buffer has quirky pitch requirements. From the
+ * Sandybridge PRM, Volume 2 Part 1, page 329 (3DSTATE_STENCIL_BUFFER
+ * dword 1 bits 16:0 - Surface Pitch):
+ *
+ * The pitch must be set to 2x the value computed based on width, as
+ * the stencil buffer is stored with two rows interleaved.
+ *
+ * While the Ivybridge PRM lacks this comment, the BSpec contains the
+ * same text, and experiments indicate that this is necessary.
+ */
+ mt->pitch *= 2;
} else {
mt->bo = brw_bo_alloc_tiled_2d(brw->bufmgr, "miptree",
mt->total_width, mt->total_height,
@@ -2819,7 +2831,7 @@ intel_offset_S8(uint32_t stride, uint32_t x, uint32_t y, bool swizzled)
uint32_t tile_size = 4096;
uint32_t tile_width = 64;
uint32_t tile_height = 64;
- uint32_t row_size = 64 * stride;
+ uint32_t row_size = 64 * stride / 2; /* Two rows are interleaved. */
uint32_t tile_x = x / tile_width;
uint32_t tile_y = y / tile_height;
@@ -3197,12 +3209,8 @@ intel_miptree_map_s8(struct brw_context *brw,
* temporary buffer back out.
*/
if (!(map->mode & GL_MAP_INVALIDATE_RANGE_BIT)) {
- /* ISL uses a stencil pitch value that is expected by hardware whereas
- * traditional miptree uses half of that. Below the value gets supplied
- * to intel_offset_S8() which expects the legacy interpretation.
- */
const unsigned pitch = mt->surf.size > 0 ?
- mt->surf.row_pitch / 2 : mt->pitch;
+ mt->surf.row_pitch : mt->pitch;
uint8_t *untiled_s8_map = map->ptr;
uint8_t *tiled_s8_map = intel_miptree_map_raw(brw, mt, GL_MAP_READ_BIT);
unsigned int image_x, image_y;
@@ -3239,12 +3247,8 @@ intel_miptree_unmap_s8(struct brw_context *brw,
unsigned int slice)
{
if (map->mode & GL_MAP_WRITE_BIT) {
- /* ISL uses a stencil pitch value that is expected by hardware whereas
- * traditional miptree uses half of that. Below the value gets supplied
- * to intel_offset_S8() which expects the legacy interpretation.
- */
const unsigned pitch = mt->surf.size > 0 ?
- mt->surf.row_pitch / 2: mt->pitch;
+ mt->surf.row_pitch : mt->pitch;
unsigned int image_x, image_y;
uint8_t *untiled_s8_map = map->ptr;
uint8_t *tiled_s8_map = intel_miptree_map_raw(brw, mt, GL_MAP_WRITE_BIT);
@@ -3352,12 +3356,8 @@ intel_miptree_map_depthstencil(struct brw_context *brw,
* temporary buffer back out.
*/
if (!(map->mode & GL_MAP_INVALIDATE_RANGE_BIT)) {
- /* ISL uses a stencil pitch value that is expected by hardware whereas
- * traditional miptree uses half of that. Below the value gets supplied
- * to intel_offset_S8() which expects the legacy interpretation.
- */
const unsigned s_pitch = s_mt->surf.size > 0 ?
- s_mt->surf.row_pitch / 2 : s_mt->pitch;
+ s_mt->surf.row_pitch : s_mt->pitch;
uint32_t *packed_map = map->ptr;
uint8_t *s_map = intel_miptree_map_raw(brw, s_mt, GL_MAP_READ_BIT);
uint32_t *z_map = intel_miptree_map_raw(brw, z_mt, GL_MAP_READ_BIT);
@@ -3419,12 +3419,8 @@ intel_miptree_unmap_depthstencil(struct brw_context *brw,
bool map_z32f_x24s8 = mt->format == MESA_FORMAT_Z_FLOAT32;
if (map->mode & GL_MAP_WRITE_BIT) {
- /* ISL uses a stencil pitch value that is expected by hardware whereas
- * traditional miptree uses half of that. Below the value gets supplied
- * to intel_offset_S8() which expects the legacy interpretation.
- */
const unsigned s_pitch = s_mt->surf.size > 0 ?
- s_mt->surf.row_pitch / 2 : s_mt->pitch;
+ s_mt->surf.row_pitch : s_mt->pitch;
uint32_t *packed_map = map->ptr;
uint8_t *s_map = intel_miptree_map_raw(brw, s_mt, GL_MAP_WRITE_BIT);
uint32_t *z_map = intel_miptree_map_raw(brw, z_mt, GL_MAP_WRITE_BIT);
@@ -3738,17 +3734,7 @@ intel_miptree_get_isl_surf(struct brw_context *brw,
mt->array_layout);
surf->msaa_layout = mt->surf.msaa_layout;
surf->tiling = intel_miptree_get_isl_tiling(mt);
-
- if (mt->format == MESA_FORMAT_S_UINT8) {
- /* The ISL definition of row_pitch matches the surface state pitch field
- * a bit better than intel_mipmap_tree. In particular, ISL incorporates
- * the factor of 2 for W-tiling in row_pitch.
- */
- surf->row_pitch = 2 * mt->pitch;
- } else {
- surf->row_pitch = mt->pitch;
- }
-
+ surf->row_pitch = mt->pitch;
surf->format = translate_tex_format(brw, mt->format, false);
if (brw->gen >= 9) {
--
2.11.0
More information about the mesa-dev
mailing list