[Mesa-dev] [RFC 11/12] anv/cmd_buffer: Emit instanced draws for multiple views
Iago Toral
itoral at igalia.com
Fri Mar 24 12:53:58 UTC 2017
On Wed, 2017-03-22 at 21:01 -0700, Jason Ekstrand wrote:
---
src/intel/vulkan/anv_private.h | 6 ++
src/intel/vulkan/genX_cmd_buffer.c | 141
++++++++++++++++++++++++++++++++++++-
src/intel/vulkan/genX_pipeline.c | 10 ++-
3 files changed, 152 insertions(+), 5 deletions(-)
diff --git a/src/intel/vulkan/anv_private.h
b/src/intel/vulkan/anv_private.h
index b402bc3..253dce2 100644
--- a/src/intel/vulkan/anv_private.h
+++ b/src/intel/vulkan/anv_private.h
@@ -1980,6 +1980,12 @@ struct anv_subpass {
bool has_resolve;
};
+static inline unsigned
+anv_subpass_view_count(const struct anv_subpass *subpass)
+{
+ return MAX2(1, _mesa_bitcount(subpass->view_mask));
+}
+
enum anv_subpass_usage {
ANV_SUBPASS_USAGE_DRAW = (1 << 0),
ANV_SUBPASS_USAGE_INPUT = (1 << 1),
diff --git a/src/intel/vulkan/genX_cmd_buffer.c
b/src/intel/vulkan/genX_cmd_buffer.c
index aafe7fd..8c21c33 100644
--- a/src/intel/vulkan/genX_cmd_buffer.c
+++ b/src/intel/vulkan/genX_cmd_buffer.c
@@ -26,6 +26,7 @@
#include "anv_private.h"
#include "vk_format_info.h"
+#include "util/vk_util.h"
#include "common/gen_l3_config.h"
#include "genxml/gen_macros.h"
@@ -50,6 +51,17 @@ emit_lri(struct anv_batch *batch, uint32_t reg,
uint32_t imm)
}
}
+#if GEN_IS_HASWELL || GEN_GEN >= 8
+static void
+emit_lrr(struct anv_batch *batch, uint32_t dst, uint32_t src)
+{
+ anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_REG), lrr) {
+ lrr.SourceRegisterAddress = src;
+ lrr.DestinationRegisterAddress = dst;
+ }
+}
+#endif
+
void
genX(cmd_buffer_emit_state_base_address)(struct anv_cmd_buffer
*cmd_buffer)
{
@@ -1525,7 +1537,13 @@ genX(cmd_buffer_flush_state)(struct
anv_cmd_buffer *cmd_buffer)
.MemoryObjectControlState = GENX(MOCS),
#else
.BufferAccessType = pipeline->instancing_enable[vb] ?
INSTANCEDATA : VERTEXDATA,
- .InstanceDataStepRate = 1,
+ /* Our implementation of VK_KHR_multiview uses
instancing to draw
+ * the different views. If the client asks for
instancing, we
+ * need to use the Instance Data Step Rate to ensure
that we
+ * repeat the client's per-instance data once for each
view.
+ */
+ .InstanceDataStepRate =
+ _mesa_bitcount(pipeline->subpass->view_mask),
mmm... shouldn't this be:
.InstanceDataStepRate = anv_subpass_view_count(pipeline->subpass);
so that we set this to 1 when multiview is not in use? (view_mask == 0)
.VertexBufferMemoryObjectControlState = GENX(MOCS),
#endif
@@ -1715,6 +1733,11 @@ void genX(CmdDraw)(
if (vs_prog_data->uses_drawid)
emit_draw_index(cmd_buffer, 0);
+ /* Our implementation of VK_KHR_multiview uses instancing to draw
the
+ * different views. We need to multiply instanceCount by the
view count.
+ */
+ instanceCount *= anv_subpass_view_count(cmd_buffer-
>state.subpass);
+
anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
prim.VertexAccessType = SEQUENTIAL;
prim.PrimitiveTopologyType = pipeline->topology;
@@ -1748,6 +1771,11 @@ void genX(CmdDrawIndexed)(
if (vs_prog_data->uses_drawid)
emit_draw_index(cmd_buffer, 0);
+ /* Our implementation of VK_KHR_multiview uses instancing to draw
the
+ * different views. We need to multiply instanceCount by the
view count.
+ */
+ instanceCount *= anv_subpass_view_count(cmd_buffer-
>state.subpass);
+
anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
prim.VertexAccessType = RANDOM;
prim.PrimitiveTopologyType = pipeline->topology;
@@ -1767,6 +1795,90 @@ void genX(CmdDrawIndexed)(
#define GEN7_3DPRIM_START_INSTANCE 0x243C
#define GEN7_3DPRIM_BASE_VERTEX 0x2440
+/* MI_MATH only exists on Haswell+ */
+#if GEN_IS_HASWELL || GEN_GEN >= 8
+
+#define alu_opcode(v) __gen_uint((v), 20, 31)
+#define alu_operand1(v) __gen_uint((v), 10, 19)
+#define alu_operand2(v) __gen_uint((v), 0, 9)
+#define alu(opcode, operand1, operand2) \
+ alu_opcode(opcode) | alu_operand1(operand1) |
alu_operand2(operand2)
+
+#define OPCODE_NOOP 0x000
+#define OPCODE_LOAD 0x080
+#define OPCODE_LOADINV 0x480
+#define OPCODE_LOAD0 0x081
+#define OPCODE_LOAD1 0x481
+#define OPCODE_ADD 0x100
+#define OPCODE_SUB 0x101
+#define OPCODE_AND 0x102
+#define OPCODE_OR 0x103
+#define OPCODE_XOR 0x104
+#define OPCODE_STORE 0x180
+#define OPCODE_STOREINV 0x580
+
+#define OPERAND_R0 0x00
+#define OPERAND_R1 0x01
+#define OPERAND_R2 0x02
+#define OPERAND_R3 0x03
+#define OPERAND_R4 0x04
+#define OPERAND_SRCA 0x20
+#define OPERAND_SRCB 0x21
+#define OPERAND_ACCU 0x31
+#define OPERAND_ZF 0x32
+#define OPERAND_CF 0x33
+
+#define CS_GPR(n) (0x2600 + (n) * 8)
+
+/* Emit dwords to multiply GPR0 by N */
+static void
+build_alu_multiply_gpr0(uint32_t *dw, unsigned *dw_count, uint32_t
N)
+{
+ VK_OUTARRAY_MAKE(out, dw, dw_count);
+
+#define append_alu(opcode, operand1, operand2) \
+ vk_outarray_append(&out, alu_dw) *alu_dw = alu(opcode, operand1,
operand2)
+
+ assert(N > 0);
+ unsigned top_bit = 31 - __builtin_clz(N);
+ for (int i = top_bit - 1; i >= 0; i--) {
+ /* We get our initial data in GPR0 and we write the final data
out to
+ * GPR0 but we use GPR1 as our scratch register.
+ */
+ unsigned src_reg = i == top_bit - 1 ? OPERAND_R0 : OPERAND_R1;
+ unsigned dst_reg = i == 0 ? OPERAND_R0 : OPERAND_R1;
+
+ /* Shift the current value left by 1 */
+ append_alu(OPCODE_LOAD, OPERAND_SRCA, src_reg);
+ append_alu(OPCODE_LOAD, OPERAND_SRCB, src_reg);
+ append_alu(OPCODE_AND, 0, 0);
+
+ if (N & (1 << i)) {
+ /* Store ACCU to R1 and add R0 to R1 */
+ append_alu(OPCODE_STORE, OPERAND_R1, OPERAND_ACCU);
+ append_alu(OPCODE_LOAD, OPERAND_SRCA, OPERAND_R0);
+ append_alu(OPCODE_LOAD, OPERAND_SRCB, OPERAND_R1);
+ append_alu(OPCODE_AND, 0, 0);
+ }
+
+ append_alu(OPCODE_STORE, dst_reg, OPERAND_ACCU);
+ }
+
+#undef append_alu
+}
+
+static void
+emit_mul_gpr0(struct anv_batch *batch, uint32_t N)
+{
+ uint32_t num_dwords;
> + build_alu_multiply_gpr0(NULL, &num_dwords, N);
I don't get this, it seems that the expectation of this code is
that build_alu_multiply_gpr0() fills in num_dwords when we call it
with NULL in the first argument, but I don't see where it does that,
what am I missing?
+
+ uint32_t *dw = anv_batch_emitn(batch, 1 + num_dwords,
GENX(MI_MATH));
+ build_alu_multiply_gpr0(dw, &num_dwords, N);
+}
+
+#endif /* GEN_IS_HASWELL || GEN_GEN >= 8 */
+
static void
load_indirect_parameters(struct anv_cmd_buffer *cmd_buffer,
struct anv_buffer *buffer, uint64_t offset,
@@ -1777,7 +1889,22 @@ load_indirect_parameters(struct anv_cmd_buffer
*cmd_buffer,
uint32_t bo_offset = buffer->offset + offset;
emit_lrm(batch, GEN7_3DPRIM_VERTEX_COUNT, bo, bo_offset);
- emit_lrm(batch, GEN7_3DPRIM_INSTANCE_COUNT, bo, bo_offset + 4);
+
+ unsigned view_count = anv_subpass_view_count(cmd_buffer-
>state.subpass);
+ if (view_count > 1) {
+#if GEN_IS_HASWELL || GEN_GEN >= 8
+ emit_lrm(batch, CS_GPR(0), bo, bo_offset + 4);
+ emit_mul_gpr0(batch, view_count);
+ emit_lrr(batch, GEN7_3DPRIM_INSTANCE_COUNT, CS_GPR(0));
+#else
+ anv_finishme("Multiview + indirect draw requires MI_MATH\n"
+ "MI_MATH is not supported on Ivy Bridge");
+ emit_lrm(batch, GEN7_3DPRIM_INSTANCE_COUNT, bo, bo_offset +
4);
+#endif
+ } else {
+ emit_lrm(batch, GEN7_3DPRIM_INSTANCE_COUNT, bo, bo_offset +
4);
+ }
+
emit_lrm(batch, GEN7_3DPRIM_START_VERTEX, bo, bo_offset + 8);
if (indexed) {
@@ -2531,6 +2658,16 @@ genX(cmd_buffer_set_subpass)(struct
anv_cmd_buffer *cmd_buffer,
cmd_buffer->state.dirty |= ANV_CMD_DIRTY_RENDER_TARGETS;
+ /* Our implementation of VK_KHR_multiview uses instancing to draw
the
+ * different views. If the client asks for instancing, we need
to use the
+ * Instance Data Step Rate to ensure that we repeat the client's
+ * per-instance data once for each view. Since this bit is in
+ * VERTEX_BUFFER_STATE on gen7, we need to dirty vertex buffers
at the top
+ * of each subpass.
+ */
+ if (GEN_GEN == 7)
+ cmd_buffer->state.vb_dirty |= ~0;
> +
Shouldn't we do:
if (GEN_GEN == 7 && subpass->view_mask != 0)
cmd_buffer->state.vb_dirty |= ~0;
So this doesn't affect cases that don't use multiview?
> /* Perform transitions to the subpass layout before any writes
> have
* occurred.
*/
diff --git a/src/intel/vulkan/genX_pipeline.c
b/src/intel/vulkan/genX_pipeline.c
index 85a9e4f..9aaa8a0 100644
--- a/src/intel/vulkan/genX_pipeline.c
+++ b/src/intel/vulkan/genX_pipeline.c
@@ -155,9 +155,13 @@ emit_vertex_input(struct anv_pipeline *pipeline,
anv_batch_emit(&pipeline->batch, GENX(3DSTATE_VF_INSTANCING),
vfi) {
vfi.InstancingEnable = pipeline->instancing_enable[desc-
>binding];
vfi.VertexElementIndex = slot;
- /* Vulkan so far doesn't have an instance divisor, so
- * this is always 1 (ignored if not instancing). */
- vfi.InstanceDataStepRate = 1;
+ /* Our implementation of VK_KHX_multiview uses instancing
to draw
+ * the different views. If the client asks for instancing,
we
+ * need to use the Instance Data Step Rate to ensure that
we
+ * repeat the client's per-instance data once for each
view.
+ */
+ vfi.InstanceDataStepRate =
> + _mesa_bitcount(pipeline->subpass->view_mask);
Same comment as above, shouldn't this be:
vfi.InstanceDataStepRate = anv_subpass_view_count(pipeline->subpass);
instead?
> }
#endif
}
More information about the mesa-dev
mailing list