[Mesa-dev] [PATCH 10/18] radeon/vcn: add encode header implementations

[Zhang, Boyuan]

-----Original Message-----
From: Zhang, Boyuan 
Sent: November-13-17 11:41 AM
To: Andy Furniss; Koenig, Christian; Mark Thompson; mesa-dev at lists.freedesktop.org
Subject: RE: [Mesa-dev] [PATCH 10/18] radeon/vcn: add encode header implementations

Zhang, Boyuan wrote:

>>>>> diff --git a/src/gallium/drivers/radeon/radeon_vcn_enc_1_2.c
>>>>> b/src/gallium/drivers/radeon/radeon_vcn_enc_1_2.c
>>>>> index 5170c67..c6dc420 100644
>>>>> --- a/src/gallium/drivers/radeon/radeon_vcn_enc_1_2.c
>>>>> +++ b/src/gallium/drivers/radeon/radeon_vcn_enc_1_2.c
>>>>> @@ -362,6 +362,233 @@ static void radeon_enc_quality_params(struct radeon_encoder *enc)
>>>>>    	RADEON_ENC_END();
>>>>>    }
>>>>>    
>>>>> +static void radeon_enc_nalu_sps(struct radeon_encoder *enc) {
>>>>> +	RADEON_ENC_BEGIN(RENCODE_IB_PARAM_DIRECT_OUTPUT_NALU);
>>>>> +	RADEON_ENC_CS(RENCODE_DIRECT_OUTPUT_NALU_TYPE_SPS);
>>>>> +	uint32_t *size_in_bytes = &enc->cs->current.buf[enc->cs->current.cdw++];
>>>>> +	radeon_enc_reset(enc);
>>>>> +	radeon_enc_set_emulation_prevention(enc, false);
>>>>> +	radeon_enc_code_fixed_bits(enc, 0x00000001, 32);
>>>>> +	radeon_enc_code_fixed_bits(enc, 0x67, 8);
>>>>> +	radeon_enc_byte_align(enc);
>>>>> +	radeon_enc_set_emulation_prevention(enc, true);
>>>>> +	radeon_enc_code_fixed_bits(enc, enc->enc_pic.spec_misc.profile_idc, 8);
>>>>> +	radeon_enc_code_fixed_bits(enc, 0x04, 8);
>>>> Please always set constraint_set1_flag when profile_idc is 66.  There are enough actually-constrained-baseline-but-not-marked-as-such streams in the world already to catch out decoders without full baseline support (that is, all of them).
>>>>
>>>> Also, "constraint_set5_flag shall be equal to 0 when profile_idc is not equal to 77, 88, 100, or 118".
>> 
>> [Boyuan] Thanks for pointing out. I modified the value to be 0x44 in the new patch (set1=1, and set5=1) since we only support constrained baseline for now.
>
>It's not really with cabac though. I know there was a patch to turn it off - but that would have been wasteful and make linux < windows.
>
>Why not use 77 if cabac is on + not set constrained bits, windows seems to set main.
>
>Currently with vce trying to set main manually from ffmeg/gst in order to get something "correct" still sets flags = something that's not seen as main (but works).

Yes, but still the problem is cabac is not allowed for baseline profile and we only support baseline for now. I'm not quite sure about windows test you mentioned, I'm just guessing that we might have some main profile features support in some closed test environment on windows side, but definitely not all main profile features, no b frame support. 
On linux side, we only support baseline profile for this vcn enc.
(fixed a typo)