[Mesa-dev] [PATCH] anv/android: handle storage images in vkGetSwapchainGrallocUsageANDROID
Bas Nieuwenhuizen
basni at chromium.org
Wed Dec 5 12:00:00 UTC 2018
On Wed, Dec 5, 2018 at 12:51 PM Tapani Pälli <tapani.palli at intel.com> wrote:
>
>
>
> On 12/5/18 1:44 PM, Bas Nieuwenhuizen wrote:
> > On Wed, Dec 5, 2018 at 12:37 PM Tapani Pälli <tapani.palli at intel.com> wrote:
> >>
> >>
> >>
> >> On 12/5/18 1:22 PM, Bas Nieuwenhuizen wrote:
> >>> On Wed, Dec 5, 2018 at 12:15 PM Tapani Pälli <tapani.palli at intel.com> wrote:
> >>>>
> >>>>
> >>>>
> >>>> On 12/5/18 1:01 PM, Bas Nieuwenhuizen wrote:
> >>>>> On Fri, Sep 7, 2018 at 12:54 AM Kevin Strasser <kevin.strasser at intel.com> wrote:
> >>>>>>
> >>>>>> Android P and earlier expect that the surface supports storage images, and
> >>>>>> so many of the tests fail when the framework checks for that support. The
> >>>>>> framework also includes various image format and usage combinations that are
> >>>>>> invalid for the hardware.
> >>>>>>
> >>>>>> Drop the STORAGE restriction from the HAL and whitelist a pair of
> >>>>>> formats so that existing versions of Android can pass these tests.
> >>>>>>
> >>>>>> Fixes:
> >>>>>> dEQP-VK.wsi.android.*
> >>>>>>
> >>>>>> Signed-off-by: Kevin Strasser <kevin.strasser at intel.com>
> >>>>>> ---
> >>>>>> src/intel/vulkan/anv_android.c | 23 ++++++++++++++---------
> >>>>>> 1 file changed, 14 insertions(+), 9 deletions(-)
> >>>>>>
> >>>>>> diff --git a/src/intel/vulkan/anv_android.c b/src/intel/vulkan/anv_android.c
> >>>>>> index 46c41d5..e2640b8 100644
> >>>>>> --- a/src/intel/vulkan/anv_android.c
> >>>>>> +++ b/src/intel/vulkan/anv_android.c
> >>>>>> @@ -234,7 +234,7 @@ VkResult anv_GetSwapchainGrallocUsageANDROID(
> >>>>>> *grallocUsage = 0;
> >>>>>> intel_logd("%s: format=%d, usage=0x%x", __func__, format, imageUsage);
> >>>>>>
> >>>>>> - /* WARNING: Android Nougat's libvulkan.so hardcodes the VkImageUsageFlags
> >>>>>> + /* WARNING: Android's libvulkan.so hardcodes the VkImageUsageFlags
> >>>>>> * returned to applications via VkSurfaceCapabilitiesKHR::supportedUsageFlags.
> >>>>>> * The relevant code in libvulkan/swapchain.cpp contains this fun comment:
> >>>>>> *
> >>>>>> @@ -247,7 +247,7 @@ VkResult anv_GetSwapchainGrallocUsageANDROID(
> >>>>>> * dEQP-VK.wsi.android.swapchain.*.image_usage to fail.
> >>>>>> */
> >>>>>>
> >>>>>> - const VkPhysicalDeviceImageFormatInfo2KHR image_format_info = {
> >>>>>> + VkPhysicalDeviceImageFormatInfo2KHR image_format_info = {
> >>>>>
> >>>>> Why remove the const here?
> >>>>>
> >>>>>> .sType = VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_IMAGE_FORMAT_INFO_2_KHR,
> >>>>>> .format = format,
> >>>>>> .type = VK_IMAGE_TYPE_2D,
> >>>>>> @@ -255,6 +255,17 @@ VkResult anv_GetSwapchainGrallocUsageANDROID(
> >>>>>> .usage = imageUsage,
> >>>>>> };
> >>>>>>
> >>>>>> + /* Android P and earlier doesn't check if the physical device supports a
> >>>>>> + * given format and usage combination before calling this function. Omit the
> >>>>>> + * storage requirement to make the tests pass.
> >>>>>> + */
> >>>>>> +#if ANDROID_API_LEVEL <= 28
> >>>>>> + if (format == VK_FORMAT_R8G8B8A8_SRGB ||
> >>>>>> + format == VK_FORMAT_R5G6B5_UNORM_PACK16) {
> >>>>>> + image_format_info.usage &= ~VK_IMAGE_USAGE_STORAGE_BIT;
> >>>>>> + }
> >>>>>> +#endif
> >>>>>
> >>>>> I don't think you need this. Per the vulkan spec you can only use an
> >>>>> format + usage combination for a swapchain if it is supported per
> >>>>> ImageFormatProperties, using essentially the same check happening
> >>>>> above. I know CTs has been bad at this, but Vulkan CTS should have
> >>>>> been fixed for a bit now. (I don't think all the fixes are in Android
> >>>>> CTS 9.0_r4 yet, maybe the next release?)
> >>>>
> >>>> AFAIK the problem here is not about CTS. It's the swapchain
> >>>> implementation that always requires storage support.
> >>>
> >>> Actually swapchain creation has the following valid usage rule:
> >>>
> >>> "The implied image creation parameters of the swapchain must be
> >>> supported as reported by vkGetPhysicalDeviceImageFormatProperties"
> >>>
> >>> So since those formats don't support the STORAGE usage bit, that test
> >>> fails and you are not allowed to create a swapchain with those formats
> >>> and storage, even if the surface capabiliities expose the STORAGE
> >>> usage bit in general.
> >>
> >> Right ... this stuff was done because comment in the swapchain setting
> >> the bits seems like maybe it's not thought through:
> >>
> >> // TODO(jessehall): I think these are right, but haven't thought hard about
> >> // it. Do we need to query the driver for support of any of these?
> >
> > That was from before the spec was changed to add that rule.
>
> OK if I understand correctly, so should we rather then try to fix those
> tests to skip instead of fail?
They should be fixed with:
https://github.com/KhronosGroup/VK-GL-CTS/commit/49eab80e4a8b3af1790b9ac88b096aa9bffd193f#diff-8369d6640a2c6ad0c0fc1d85b113faeb
https://github.com/KhronosGroup/VK-GL-CTS/commit/858f5396a4f63223fcf31f717d23b4b552e10182#diff-8369d6640a2c6ad0c0fc1d85b113faeb
>
> >>
> >>>>
> >>>>> (Also silently removing the usage bit is bad, because the app could
> >>>>> try actually using images stores with the image ...)
> >>>>
> >>>> True, it is not nice ..
> >>>>
> >>>>
> >>>>>> +
> >>>>>> VkImageFormatProperties2KHR image_format_props = {
> >>>>>> .sType = VK_STRUCTURE_TYPE_IMAGE_FORMAT_PROPERTIES_2_KHR,
> >>>>>> };
> >>>>>> @@ -268,19 +279,13 @@ VkResult anv_GetSwapchainGrallocUsageANDROID(
> >>>>>> "inside %s", __func__);
> >>>>>> }
> >>>>>>
> >>>>>> - /* Reject STORAGE here to avoid complexity elsewhere. */
> >>>>>> - if (imageUsage & VK_IMAGE_USAGE_STORAGE_BIT) {
> >>>>>> - return vk_errorf(device->instance, device, VK_ERROR_FORMAT_NOT_SUPPORTED,
> >>>>>> - "VK_IMAGE_USAGE_STORAGE_BIT unsupported for gralloc "
> >>>>>> - "swapchain");
> >>>>>> - }
> >>>>>> -
> >>>>>> if (unmask32(&imageUsage, VK_IMAGE_USAGE_TRANSFER_DST_BIT |
> >>>>>> VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT))
> >>>>>> *grallocUsage |= GRALLOC_USAGE_HW_RENDER;
> >>>>>>
> >>>>>> if (unmask32(&imageUsage, VK_IMAGE_USAGE_TRANSFER_SRC_BIT |
> >>>>>> VK_IMAGE_USAGE_SAMPLED_BIT |
> >>>>>> + VK_IMAGE_USAGE_STORAGE_BIT |
> >>>>>> VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT))
> >>>>>> *grallocUsage |= GRALLOC_USAGE_HW_TEXTURE;
> >>>>>>
> >>>>>> --
> >>>>>> 2.7.4
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> mesa-dev mailing list
> >>>>>> mesa-dev at lists.freedesktop.org
> >>>>>> https://lists.freedesktop.org/mailman/listinfo/mesa-dev
> >>>>> _______________________________________________
> >>>>> mesa-dev mailing list
> >>>>> mesa-dev at lists.freedesktop.org
> >>>>> https://lists.freedesktop.org/mailman/listinfo/mesa-dev
> >>>>>
More information about the mesa-dev
mailing list