[Mesa-dev] [PATCH v11 08/15] vulkan/wsi/x11: Consistently update swapchain status

Daniel Stone daniels at collabora.com
Wed Feb 21 14:05:52 UTC 2018


Use a helper function for updating the swapchain status. This will be
used later to handle VK_SUBOPTIMAL_KHR, where we need to make a
non-error status stick to the swapchain until recreation.

Signed-off-by: Daniel Stone <daniels at collabora.com>
---
 src/vulkan/wsi/wsi_common_x11.c | 90 ++++++++++++++++++++++++++++++++---------
 1 file changed, 72 insertions(+), 18 deletions(-)

diff --git a/src/vulkan/wsi/wsi_common_x11.c b/src/vulkan/wsi/wsi_common_x11.c
index 308b20c9f02..e84572810d3 100644
--- a/src/vulkan/wsi/wsi_common_x11.c
+++ b/src/vulkan/wsi/wsi_common_x11.c
@@ -641,6 +641,36 @@ struct x11_swapchain {
    struct x11_image                             images[0];
 };
 
+/**
+ * Update the swapchain status with the result of an operation, and return
+ * the combined status. The chain status will eventually be returned from
+ * AcquireNextImage and QueuePresent.
+ *
+ * We make sure to 'stick' more pessimistic statuses: an out-of-date error
+ * is permanent once seen, and every subsequent call will return this. If
+ * this has not been seen, success will be returned.
+ */
+static VkResult
+x11_swapchain_result(struct x11_swapchain *chain, VkResult result)
+{
+   /* Prioritise returning existing errors for consistency. */
+   if (chain->status < 0)
+      return chain->status;
+
+   /* If we have a new error, mark it as permanent on the chain and return. */
+   if (result < 0) {
+      chain->status = result;
+      return result;
+   }
+
+   /* Return temporary errors, but don't persist them. */
+   if (result == VK_TIMEOUT || result == VK_NOT_READY)
+      return result;
+
+   /* No changes, so return the last status. */
+   return chain->status;
+}
+
 static struct wsi_image *
 x11_get_wsi_image(struct wsi_swapchain *wsi_chain, uint32_t image_index)
 {
@@ -648,6 +678,9 @@ x11_get_wsi_image(struct wsi_swapchain *wsi_chain, uint32_t image_index)
    return &chain->images[image_index].base;
 }
 
+/**
+ * Process an X11 Present event. Does not update chain->status.
+ */
 static VkResult
 x11_handle_dri3_present_event(struct x11_swapchain *chain,
                               xcb_present_generic_event_t *event)
@@ -719,6 +752,8 @@ x11_acquire_next_image_poll_x11(struct x11_swapchain *chain,
    xcb_generic_event_t *event;
    struct pollfd pfds;
    uint64_t atimeout;
+   VkResult result = VK_SUCCESS;
+
    while (1) {
       for (uint32_t i = 0; i < chain->base.image_count; i++) {
          if (!chain->images[i].busy) {
@@ -726,7 +761,8 @@ x11_acquire_next_image_poll_x11(struct x11_swapchain *chain,
             xshmfence_await(chain->images[i].shm_fence);
             *image_index = i;
             chain->images[i].busy = true;
-            return VK_SUCCESS;
+            result = VK_SUCCESS;
+	    goto out;
          }
       }
 
@@ -734,24 +770,31 @@ x11_acquire_next_image_poll_x11(struct x11_swapchain *chain,
 
       if (timeout == UINT64_MAX) {
          event = xcb_wait_for_special_event(chain->conn, chain->special_event);
-         if (!event)
-            return VK_ERROR_OUT_OF_DATE_KHR;
+         if (!event) {
+            result = VK_ERROR_OUT_OF_DATE_KHR;
+            goto out;
+         }
       } else {
          event = xcb_poll_for_special_event(chain->conn, chain->special_event);
          if (!event) {
             int ret;
-            if (timeout == 0)
-               return VK_NOT_READY;
+            if (timeout == 0) {
+               result = VK_NOT_READY;
+               goto out;
+            }
 
             atimeout = wsi_get_absolute_timeout(timeout);
 
             pfds.fd = xcb_get_file_descriptor(chain->conn);
             pfds.events = POLLIN;
             ret = poll(&pfds, 1, timeout / 1000 / 1000);
-            if (ret == 0)
-               return VK_TIMEOUT;
-            if (ret == -1)
-               return VK_ERROR_OUT_OF_DATE_KHR;
+            if (ret == 0) {
+               result = VK_TIMEOUT;
+               goto out;
+            } else if (ret == -1) {
+               result = VK_ERROR_OUT_OF_DATE_KHR;
+               goto out;
+            }
 
             /* If a non-special event happens, the fd will still
              * poll. So recalculate the timeout now just in case.
@@ -765,11 +808,18 @@ x11_acquire_next_image_poll_x11(struct x11_swapchain *chain,
          }
       }
 
+      /* Update the swapchain status here. We may catch non-fatal errors here,
+       * in which case we need to update the status and continue.
+       */
       VkResult result = x11_handle_dri3_present_event(chain, (void *)event);
+      result = x11_swapchain_result(chain, result);
       free(event);
       if (result < 0)
-         return result;
+         goto out;
    }
+
+out:
+   return x11_swapchain_result(chain, result);
 }
 
 static VkResult
@@ -781,11 +831,9 @@ x11_acquire_next_image_from_queue(struct x11_swapchain *chain,
    uint32_t image_index;
    VkResult result = wsi_queue_pull(&chain->acquire_queue,
                                     &image_index, timeout);
-   if (result < 0) {
-      return result;
-   } else if (chain->status != VK_SUCCESS) {
-      return chain->status;
-   }
+   /* On error, the thread has shut down, so safe to update chain->status */
+   if (result < 0)
+      return x11_swapchain_result(chain, result);
 
    assert(image_index < chain->base.image_count);
    xshmfence_await(chain->images[image_index].shm_fence);
@@ -859,13 +907,16 @@ x11_queue_present(struct wsi_swapchain *anv_chain,
                   const VkPresentRegionKHR *damage)
 {
    struct x11_swapchain *chain = (struct x11_swapchain *)anv_chain;
+   VkResult result;
 
    if (chain->threaded) {
       wsi_queue_push(&chain->present_queue, image_index);
-      return chain->status;
+      result = chain->status;
    } else {
-      return x11_present_to_x11(chain, image_index, 0);
+      result = x11_present_to_x11(chain, image_index, 0);
    }
+
+   return x11_swapchain_result(chain, result);
 }
 
 static void *
@@ -888,6 +939,9 @@ x11_manage_fifo_queues(void *state)
       if (result < 0) {
          goto fail;
       } else if (chain->status < 0) {
+         /* The status can change underneath us if the swapchain is destroyed
+          * from another thread.
+          */
          return NULL;
       }
 
@@ -910,7 +964,7 @@ x11_manage_fifo_queues(void *state)
    }
 
 fail:
-   chain->status = result;
+   result = x11_swapchain_result(chain, result);
    wsi_queue_push(&chain->acquire_queue, UINT32_MAX);
 
    return NULL;
-- 
2.14.3



More information about the mesa-dev mailing list