[Mesa-dev] [PATCH 03/11] intel/fs: Take an explicit exec size in brw_surface_payload_size()
Jason Ekstrand
jason at jlekstrand.net
Sat Nov 3 00:06:35 UTC 2018
Instead of magically falling back to SIMD8 for atomics and typed
messages on Ivy Bridge, explicitly figure out the exec size and pass
that into brw_surface_payload_size.
---
src/intel/compiler/brw_eu_emit.c | 59 +++++++++++++++++++++-----------
1 file changed, 39 insertions(+), 20 deletions(-)
diff --git a/src/intel/compiler/brw_eu_emit.c b/src/intel/compiler/brw_eu_emit.c
index 4630b83b1a0..d22c5743038 100644
--- a/src/intel/compiler/brw_eu_emit.c
+++ b/src/intel/compiler/brw_eu_emit.c
@@ -2727,15 +2727,14 @@ brw_svb_write(struct brw_codegen *p,
static unsigned
brw_surface_payload_size(struct brw_codegen *p,
unsigned num_channels,
- bool has_simd4x2,
- bool has_simd16)
+ unsigned exec_size /**< 0 for SIMD4x2 */)
{
- if (has_simd4x2 && brw_get_default_access_mode(p) == BRW_ALIGN_16)
- return 1;
- else if (has_simd16 && brw_get_default_exec_size(p) == BRW_EXECUTE_16)
- return 2 * num_channels;
- else
+ if (exec_size == 0)
+ return 1; /* SIMD4x2 */
+ else if (exec_size <= 8)
return num_channels;
+ else
+ return 2 * num_channels;
}
static uint32_t
@@ -2782,12 +2781,16 @@ brw_untyped_atomic(struct brw_codegen *p,
const unsigned sfid = (devinfo->gen >= 8 || devinfo->is_haswell ?
HSW_SFID_DATAPORT_DATA_CACHE_1 :
GEN7_SFID_DATAPORT_DATA_CACHE);
- const unsigned response_length = brw_surface_payload_size(
- p, response_expected, devinfo->gen >= 8 || devinfo->is_haswell, true);
+ const bool align1 = brw_get_default_access_mode(p) == BRW_ALIGN_1;
+ /* SIMD4x2 untyped atomic instructions only exist on HSW+ */
+ const bool has_simd4x2 = devinfo->gen >= 8 || devinfo->is_haswell;
+ const unsigned exec_size = align1 ? 1 << brw_get_default_exec_size(p) :
+ has_simd4x2 ? 0 : 8;
+ const unsigned response_length =
+ brw_surface_payload_size(p, response_expected, exec_size);
const unsigned desc =
brw_message_desc(devinfo, msg_length, response_length, header_present) |
brw_dp_untyped_atomic_desc(p, atomic_op, response_expected);
- const bool align1 = brw_get_default_access_mode(p) == BRW_ALIGN_1;
/* Mask out unused components -- This is especially important in Align16
* mode on generations that don't have native support for SIMD4x2 atomics,
* because unused but enabled components will cause the dataport to perform
@@ -2836,8 +2839,9 @@ brw_untyped_atomic_float(struct brw_codegen *p,
assert(brw_get_default_access_mode(p) == BRW_ALIGN_1);
const unsigned sfid = HSW_SFID_DATAPORT_DATA_CACHE_1;
- const unsigned response_length = brw_surface_payload_size(
- p, response_expected, true, true);
+ const unsigned exec_size = 1 << brw_get_default_exec_size(p);
+ const unsigned response_length =
+ brw_surface_payload_size(p, response_expected, exec_size);
const unsigned desc =
brw_message_desc(devinfo, msg_length, response_length, header_present) |
brw_dp_untyped_atomic_float_desc(p, atomic_op, response_expected);
@@ -2880,8 +2884,10 @@ brw_untyped_surface_read(struct brw_codegen *p,
const unsigned sfid = (devinfo->gen >= 8 || devinfo->is_haswell ?
HSW_SFID_DATAPORT_DATA_CACHE_1 :
GEN7_SFID_DATAPORT_DATA_CACHE);
+ const bool align1 = brw_get_default_access_mode(p) == BRW_ALIGN_1;
+ const unsigned exec_size = align1 ? 1 << brw_get_default_exec_size(p) : 0;
const unsigned response_length =
- brw_surface_payload_size(p, num_channels, true, true);
+ brw_surface_payload_size(p, num_channels, exec_size);
const unsigned desc =
brw_message_desc(devinfo, msg_length, response_length, false) |
brw_dp_untyped_surface_read_desc(p, num_channels);
@@ -2981,8 +2987,8 @@ brw_byte_scattered_read(struct brw_codegen *p,
const struct gen_device_info *devinfo = p->devinfo;
assert(devinfo->gen > 7 || devinfo->is_haswell);
assert(brw_get_default_access_mode(p) == BRW_ALIGN_1);
- const unsigned response_length =
- brw_surface_payload_size(p, 1, true, true);
+ const unsigned exec_size = 1 << brw_get_default_exec_size(p);
+ const unsigned response_length = brw_surface_payload_size(p, 1, exec_size);
const unsigned desc =
brw_message_desc(devinfo, msg_length, response_length, false) |
brw_dp_byte_scattered_desc(p, bit_size,
@@ -3058,12 +3064,18 @@ brw_typed_atomic(struct brw_codegen *p,
const unsigned sfid = (devinfo->gen >= 8 || devinfo->is_haswell ?
HSW_SFID_DATAPORT_DATA_CACHE_1 :
GEN6_SFID_DATAPORT_RENDER_CACHE);
- const unsigned response_length = brw_surface_payload_size(
- p, response_expected, devinfo->gen >= 8 || devinfo->is_haswell, false);
+ const bool align1 = brw_get_default_access_mode(p) == BRW_ALIGN_1;
+ /* SIMD4x2 typed atomic instructions only exist on HSW+ */
+ const bool has_simd4x2 = devinfo->gen >= 8 || devinfo->is_haswell;
+ const unsigned exec_size = align1 ? 1 << brw_get_default_exec_size(p) :
+ has_simd4x2 ? 0 : 8;
+ /* Typed atomics don't support SIMD16 */
+ assert(exec_size <= 8);
+ const unsigned response_length =
+ brw_surface_payload_size(p, response_expected, exec_size);
const unsigned desc =
brw_message_desc(devinfo, msg_length, response_length, header_present) |
brw_dp_typed_atomic_desc(p, atomic_op, response_expected);
- const bool align1 = brw_get_default_access_mode(p) == BRW_ALIGN_1;
/* Mask out unused components -- See comment in brw_untyped_atomic(). */
const unsigned mask = align1 ? WRITEMASK_XYZW : WRITEMASK_X;
@@ -3114,8 +3126,15 @@ brw_typed_surface_read(struct brw_codegen *p,
const unsigned sfid = (devinfo->gen >= 8 || devinfo->is_haswell ?
HSW_SFID_DATAPORT_DATA_CACHE_1 :
GEN6_SFID_DATAPORT_RENDER_CACHE);
- const unsigned response_length = brw_surface_payload_size(
- p, num_channels, devinfo->gen >= 8 || devinfo->is_haswell, false);
+ const bool align1 = brw_get_default_access_mode(p) == BRW_ALIGN_1;
+ /* SIMD4x2 typed read instructions only exist on HSW+ */
+ const bool has_simd4x2 = devinfo->gen >= 8 || devinfo->is_haswell;
+ const unsigned exec_size = align1 ? 1 << brw_get_default_exec_size(p) :
+ has_simd4x2 ? 0 : 8;
+ /* Typed surface reads don't support SIMD16 */
+ assert(exec_size <= 8);
+ const unsigned response_length =
+ brw_surface_payload_size(p, num_channels, exec_size);
const unsigned desc =
brw_message_desc(devinfo, msg_length, response_length, header_present) |
brw_dp_typed_surface_read_desc(p, num_channels);
--
2.19.1
More information about the mesa-dev
mailing list