[Mesa-dev] [PATCH v3 08/10] intel/genxml: Add engine definition to render engine instructions (gen9)
Toni Lönnberg
toni.lonnberg at intel.com
Wed Nov 7 16:38:08 UTC 2018
Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.
v2: Divided into individual patches for each gen
v3: Added additional engine definitions.
---
src/intel/genxml/gen9.xml | 226 +++++++++++++++++++-------------------
1 file changed, 113 insertions(+), 113 deletions(-)
diff --git a/src/intel/genxml/gen9.xml b/src/intel/genxml/gen9.xml
index ca268254503..12ad3d9f592 100644
--- a/src/intel/genxml/gen9.xml
+++ b/src/intel/genxml/gen9.xml
@@ -776,7 +776,7 @@
</field>
</struct>
- <instruction name="3DPRIMITIVE" bias="2" length="7">
+ <instruction name="3DPRIMITIVE" bias="2" length="7" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="3"/>
@@ -798,7 +798,7 @@
<field name="Base Vertex Location" start="192" end="223" type="int"/>
</instruction>
- <instruction name="3DSTATE_AA_LINE_PARAMETERS" bias="2" length="3">
+ <instruction name="3DSTATE_AA_LINE_PARAMETERS" bias="2" length="3" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -814,7 +814,7 @@
<field name="AA Coverage EndCap Slope" start="64" end="71" type="u0.8"/>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_EDIT_DS" bias="2">
+ <instruction name="3DSTATE_BINDING_TABLE_EDIT_DS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -831,7 +831,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_EDIT_GS" bias="2">
+ <instruction name="3DSTATE_BINDING_TABLE_EDIT_GS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -848,7 +848,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_EDIT_HS" bias="2">
+ <instruction name="3DSTATE_BINDING_TABLE_EDIT_HS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -865,7 +865,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_EDIT_PS" bias="2">
+ <instruction name="3DSTATE_BINDING_TABLE_EDIT_PS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -882,7 +882,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_EDIT_VS" bias="2">
+ <instruction name="3DSTATE_BINDING_TABLE_EDIT_VS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -899,7 +899,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_POINTERS_DS" bias="2" length="2">
+ <instruction name="3DSTATE_BINDING_TABLE_POINTERS_DS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -908,7 +908,7 @@
<field name="Pointer to DS Binding Table" start="37" end="47" type="offset"/>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_POINTERS_GS" bias="2" length="2">
+ <instruction name="3DSTATE_BINDING_TABLE_POINTERS_GS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -917,7 +917,7 @@
<field name="Pointer to GS Binding Table" start="37" end="47" type="offset"/>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_POINTERS_HS" bias="2" length="2">
+ <instruction name="3DSTATE_BINDING_TABLE_POINTERS_HS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -926,7 +926,7 @@
<field name="Pointer to HS Binding Table" start="37" end="47" type="offset"/>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_POINTERS_PS" bias="2" length="2">
+ <instruction name="3DSTATE_BINDING_TABLE_POINTERS_PS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -935,7 +935,7 @@
<field name="Pointer to PS Binding Table" start="37" end="47" type="offset"/>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_POINTERS_VS" bias="2" length="2">
+ <instruction name="3DSTATE_BINDING_TABLE_POINTERS_VS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -944,7 +944,7 @@
<field name="Pointer to VS Binding Table" start="37" end="47" type="offset"/>
</instruction>
- <instruction name="3DSTATE_BINDING_TABLE_POOL_ALLOC" bias="2" length="4">
+ <instruction name="3DSTATE_BINDING_TABLE_POOL_ALLOC" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -958,7 +958,7 @@
</field>
</instruction>
- <instruction name="3DSTATE_BLEND_STATE_POINTERS" bias="2" length="2">
+ <instruction name="3DSTATE_BLEND_STATE_POINTERS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -968,7 +968,7 @@
<field name="Blend State Pointer Valid" start="32" end="32" type="bool"/>
</instruction>
- <instruction name="3DSTATE_CC_STATE_POINTERS" bias="2" length="2">
+ <instruction name="3DSTATE_CC_STATE_POINTERS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -978,7 +978,7 @@
<field name="Color Calc State Pointer Valid" start="32" end="32" type="bool"/>
</instruction>
- <instruction name="3DSTATE_CHROMA_KEY" bias="2" length="4">
+ <instruction name="3DSTATE_CHROMA_KEY" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -989,7 +989,7 @@
<field name="ChromaKey High Value" start="96" end="127" type="uint"/>
</instruction>
- <instruction name="3DSTATE_CLEAR_PARAMS" bias="2" length="3">
+ <instruction name="3DSTATE_CLEAR_PARAMS" bias="2" length="3" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -999,7 +999,7 @@
<field name="Depth Clear Value Valid" start="64" end="64" type="bool"/>
</instruction>
- <instruction name="3DSTATE_CLIP" bias="2" length="4">
+ <instruction name="3DSTATE_CLIP" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1039,7 +1039,7 @@
<field name="Maximum VP Index" start="96" end="99" type="uint"/>
</instruction>
- <instruction name="3DSTATE_CONSTANT_DS" bias="2" length="11">
+ <instruction name="3DSTATE_CONSTANT_DS" bias="2" length="11" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1049,7 +1049,7 @@
<field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
</instruction>
- <instruction name="3DSTATE_CONSTANT_GS" bias="2" length="11">
+ <instruction name="3DSTATE_CONSTANT_GS" bias="2" length="11" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1059,7 +1059,7 @@
<field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
</instruction>
- <instruction name="3DSTATE_CONSTANT_HS" bias="2" length="11">
+ <instruction name="3DSTATE_CONSTANT_HS" bias="2" length="11" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1069,7 +1069,7 @@
<field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
</instruction>
- <instruction name="3DSTATE_CONSTANT_PS" bias="2" length="11">
+ <instruction name="3DSTATE_CONSTANT_PS" bias="2" length="11" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1079,7 +1079,7 @@
<field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
</instruction>
- <instruction name="3DSTATE_CONSTANT_VS" bias="2" length="11">
+ <instruction name="3DSTATE_CONSTANT_VS" bias="2" length="11" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1089,7 +1089,7 @@
<field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
</instruction>
- <instruction name="3DSTATE_DEPTH_BUFFER" bias="2" length="8">
+ <instruction name="3DSTATE_DEPTH_BUFFER" bias="2" length="8" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1127,7 +1127,7 @@
<field name="Surface QPitch" start="224" end="238" type="uint"/>
</instruction>
- <instruction name="3DSTATE_DRAWING_RECTANGLE" bias="2" length="4">
+ <instruction name="3DSTATE_DRAWING_RECTANGLE" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1146,7 +1146,7 @@
<field name="Drawing Rectangle Origin X" start="96" end="111" type="int"/>
</instruction>
- <instruction name="3DSTATE_DS" bias="2" length="11">
+ <instruction name="3DSTATE_DS" bias="2" length="11" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1194,7 +1194,7 @@
<field name="DUAL_PATCH Kernel Start Pointer" start="294" end="351" type="offset"/>
</instruction>
- <instruction name="3DSTATE_GATHER_CONSTANT_DS" bias="2">
+ <instruction name="3DSTATE_GATHER_CONSTANT_DS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1218,7 +1218,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_GATHER_CONSTANT_GS" bias="2">
+ <instruction name="3DSTATE_GATHER_CONSTANT_GS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1242,7 +1242,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_GATHER_CONSTANT_HS" bias="2">
+ <instruction name="3DSTATE_GATHER_CONSTANT_HS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1266,7 +1266,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_GATHER_CONSTANT_PS" bias="2">
+ <instruction name="3DSTATE_GATHER_CONSTANT_PS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1292,7 +1292,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_GATHER_CONSTANT_VS" bias="2">
+ <instruction name="3DSTATE_GATHER_CONSTANT_VS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1318,7 +1318,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_GATHER_POOL_ALLOC" bias="2" length="4">
+ <instruction name="3DSTATE_GATHER_POOL_ALLOC" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1330,7 +1330,7 @@
<field name="Gather Pool Buffer Size" start="108" end="127" type="uint"/>
</instruction>
- <instruction name="3DSTATE_GS" bias="2" length="10">
+ <instruction name="3DSTATE_GS" bias="2" length="10" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1399,7 +1399,7 @@
<field name="User Clip Distance Cull Test Enable Bitmask" start="288" end="295" type="uint"/>
</instruction>
- <instruction name="3DSTATE_HIER_DEPTH_BUFFER" bias="2" length="5">
+ <instruction name="3DSTATE_HIER_DEPTH_BUFFER" bias="2" length="5" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1412,7 +1412,7 @@
<field name="Surface QPitch" start="128" end="142" type="uint"/>
</instruction>
- <instruction name="3DSTATE_HS" bias="2" length="9">
+ <instruction name="3DSTATE_HS" bias="2" length="9" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1458,7 +1458,7 @@
<field name="Include Primitive ID" start="224" end="224" type="bool"/>
</instruction>
- <instruction name="3DSTATE_INDEX_BUFFER" bias="2" length="5">
+ <instruction name="3DSTATE_INDEX_BUFFER" bias="2" length="5" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1475,7 +1475,7 @@
<field name="Buffer Size" start="128" end="159" type="uint"/>
</instruction>
- <instruction name="3DSTATE_LINE_STIPPLE" bias="2" length="3">
+ <instruction name="3DSTATE_LINE_STIPPLE" bias="2" length="3" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1489,7 +1489,7 @@
<field name="Line Stipple Repeat Count" start="64" end="72" type="uint"/>
</instruction>
- <instruction name="3DSTATE_MONOFILTER_SIZE" bias="2" length="2">
+ <instruction name="3DSTATE_MONOFILTER_SIZE" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1499,7 +1499,7 @@
<field name="Monochrome Filter Height" start="32" end="34" type="uint"/>
</instruction>
- <instruction name="3DSTATE_MULTISAMPLE" bias="2" length="2">
+ <instruction name="3DSTATE_MULTISAMPLE" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1513,7 +1513,7 @@
<field name="Number of Multisamples" start="33" end="35" type="uint"/>
</instruction>
- <instruction name="3DSTATE_POLY_STIPPLE_OFFSET" bias="2" length="2">
+ <instruction name="3DSTATE_POLY_STIPPLE_OFFSET" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1523,7 +1523,7 @@
<field name="Polygon Stipple Y Offset" start="32" end="36" type="uint"/>
</instruction>
- <instruction name="3DSTATE_POLY_STIPPLE_PATTERN" bias="2" length="33">
+ <instruction name="3DSTATE_POLY_STIPPLE_PATTERN" bias="2" length="33" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1534,7 +1534,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_PS" bias="2" length="12">
+ <instruction name="3DSTATE_PS" bias="2" length="12" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1596,7 +1596,7 @@
<field name="Kernel Start Pointer 2" start="326" end="383" type="offset"/>
</instruction>
- <instruction name="3DSTATE_PS_BLEND" bias="2" length="2">
+ <instruction name="3DSTATE_PS_BLEND" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1613,7 +1613,7 @@
<field name="Independent Alpha Blend Enable" start="39" end="39" type="bool"/>
</instruction>
- <instruction name="3DSTATE_PS_EXTRA" bias="2" length="2">
+ <instruction name="3DSTATE_PS_EXTRA" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1646,7 +1646,7 @@
</field>
</instruction>
- <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_DS" bias="2" length="2">
+ <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_DS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1656,7 +1656,7 @@
<field name="Constant Buffer Size" start="32" end="37" type="uint"/>
</instruction>
- <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_GS" bias="2" length="2">
+ <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_GS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1666,7 +1666,7 @@
<field name="Constant Buffer Size" start="32" end="37" type="uint"/>
</instruction>
- <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_HS" bias="2" length="2">
+ <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_HS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1676,7 +1676,7 @@
<field name="Constant Buffer Size" start="32" end="37" type="uint"/>
</instruction>
- <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_PS" bias="2" length="2">
+ <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_PS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1686,7 +1686,7 @@
<field name="Constant Buffer Size" start="32" end="37" type="uint"/>
</instruction>
- <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_VS" bias="2" length="2">
+ <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_VS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1696,7 +1696,7 @@
<field name="Constant Buffer Size" start="32" end="37" type="uint"/>
</instruction>
- <instruction name="3DSTATE_RASTER" bias="2" length="5">
+ <instruction name="3DSTATE_RASTER" bias="2" length="5" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1757,7 +1757,7 @@
<field name="Global Depth Offset Clamp" start="128" end="159" type="float"/>
</instruction>
- <instruction name="3DSTATE_RS_CONSTANT_POINTER" bias="2" length="4">
+ <instruction name="3DSTATE_RS_CONSTANT_POINTER" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1775,7 +1775,7 @@
<field name="Global Constant Buffer Address High" start="96" end="127" type="address"/>
</instruction>
- <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD0" bias="2">
+ <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD0" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1786,7 +1786,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD1" bias="2">
+ <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD1" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1800,7 +1800,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_DS" bias="2" length="2">
+ <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_DS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1809,7 +1809,7 @@
<field name="Pointer to DS Sampler State" start="37" end="63" type="offset"/>
</instruction>
- <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_GS" bias="2" length="2">
+ <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_GS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1818,7 +1818,7 @@
<field name="Pointer to GS Sampler State" start="37" end="63" type="offset"/>
</instruction>
- <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_HS" bias="2" length="2">
+ <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_HS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1827,7 +1827,7 @@
<field name="Pointer to HS Sampler State" start="37" end="63" type="offset"/>
</instruction>
- <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_PS" bias="2" length="2">
+ <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_PS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1836,7 +1836,7 @@
<field name="Pointer to PS Sampler State" start="37" end="63" type="offset"/>
</instruction>
- <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_VS" bias="2" length="2">
+ <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_VS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1845,7 +1845,7 @@
<field name="Pointer to VS Sampler State" start="37" end="63" type="offset"/>
</instruction>
- <instruction name="3DSTATE_SAMPLE_MASK" bias="2" length="2">
+ <instruction name="3DSTATE_SAMPLE_MASK" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1854,7 +1854,7 @@
<field name="Sample Mask" start="32" end="47" type="uint"/>
</instruction>
- <instruction name="3DSTATE_SAMPLE_PATTERN" bias="2" length="9">
+ <instruction name="3DSTATE_SAMPLE_PATTERN" bias="2" length="9" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1924,7 +1924,7 @@
<field name="2x Sample0 Y Offset" start="256" end="259" type="u0.4"/>
</instruction>
- <instruction name="3DSTATE_SBE" bias="2" length="6">
+ <instruction name="3DSTATE_SBE" bias="2" length="6" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1957,7 +1957,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_SBE_SWIZ" bias="2" length="11">
+ <instruction name="3DSTATE_SBE_SWIZ" bias="2" length="11" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1971,7 +1971,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_SCISSOR_STATE_POINTERS" bias="2" length="2">
+ <instruction name="3DSTATE_SCISSOR_STATE_POINTERS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1980,7 +1980,7 @@
<field name="Scissor Rect Pointer" start="37" end="63" type="offset"/>
</instruction>
- <instruction name="3DSTATE_SF" bias="2" length="4">
+ <instruction name="3DSTATE_SF" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2012,7 +2012,7 @@
<field name="Point Width" start="96" end="106" type="u8.3"/>
</instruction>
- <instruction name="3DSTATE_SO_BUFFER" bias="2" length="8">
+ <instruction name="3DSTATE_SO_BUFFER" bias="2" length="8" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2030,7 +2030,7 @@
<field name="Stream Offset" start="224" end="255" type="uint"/>
</instruction>
- <instruction name="3DSTATE_SO_DECL_LIST" bias="2">
+ <instruction name="3DSTATE_SO_DECL_LIST" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2049,7 +2049,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_STENCIL_BUFFER" bias="2" length="5">
+ <instruction name="3DSTATE_STENCIL_BUFFER" bias="2" length="5" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2063,7 +2063,7 @@
<field name="Surface QPitch" start="128" end="142" type="uint"/>
</instruction>
- <instruction name="3DSTATE_STREAMOUT" bias="2" length="5">
+ <instruction name="3DSTATE_STREAMOUT" bias="2" length="5" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2096,7 +2096,7 @@
<field name="Buffer 2 Surface Pitch" start="128" end="139" type="uint"/>
</instruction>
- <instruction name="3DSTATE_TE" bias="2" length="4">
+ <instruction name="3DSTATE_TE" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2126,7 +2126,7 @@
<field name="Maximum Tessellation Factor Not Odd" start="96" end="127" type="float"/>
</instruction>
- <instruction name="3DSTATE_URB_CLEAR" bias="2" length="2">
+ <instruction name="3DSTATE_URB_CLEAR" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2136,7 +2136,7 @@
<field name="URB Address" start="32" end="46" type="offset"/>
</instruction>
- <instruction name="3DSTATE_URB_DS" bias="2" length="2">
+ <instruction name="3DSTATE_URB_DS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2147,7 +2147,7 @@
<field name="DS Number of URB Entries" start="32" end="47" type="uint"/>
</instruction>
- <instruction name="3DSTATE_URB_GS" bias="2" length="2">
+ <instruction name="3DSTATE_URB_GS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2158,7 +2158,7 @@
<field name="GS Number of URB Entries" start="32" end="47" type="uint"/>
</instruction>
- <instruction name="3DSTATE_URB_HS" bias="2" length="2">
+ <instruction name="3DSTATE_URB_HS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2169,7 +2169,7 @@
<field name="HS Number of URB Entries" start="32" end="47" type="uint"/>
</instruction>
- <instruction name="3DSTATE_URB_VS" bias="2" length="2">
+ <instruction name="3DSTATE_URB_VS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2180,7 +2180,7 @@
<field name="VS Number of URB Entries" start="32" end="47" type="uint"/>
</instruction>
- <instruction name="3DSTATE_VERTEX_BUFFERS" bias="2">
+ <instruction name="3DSTATE_VERTEX_BUFFERS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2191,7 +2191,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_VERTEX_ELEMENTS" bias="2">
+ <instruction name="3DSTATE_VERTEX_ELEMENTS" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2202,7 +2202,7 @@
</group>
</instruction>
- <instruction name="3DSTATE_VF" bias="2" length="2">
+ <instruction name="3DSTATE_VF" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2214,7 +2214,7 @@
<field name="Cut Index" start="32" end="63" type="uint"/>
</instruction>
- <instruction name="3DSTATE_VF_COMPONENT_PACKING" bias="2" length="5">
+ <instruction name="3DSTATE_VF_COMPONENT_PACKING" bias="2" length="5" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2254,7 +2254,7 @@
<field name="Vertex Element 24 Enables" start="128" end="131" type="uint"/>
</instruction>
- <instruction name="3DSTATE_VF_INSTANCING" bias="2" length="3">
+ <instruction name="3DSTATE_VF_INSTANCING" bias="2" length="3" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2265,7 +2265,7 @@
<field name="Instance Data Step Rate" start="64" end="95" type="uint"/>
</instruction>
- <instruction name="3DSTATE_VF_SGVS" bias="2" length="2">
+ <instruction name="3DSTATE_VF_SGVS" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2289,7 +2289,7 @@
<field name="VertexID Element Offset" start="32" end="37" type="uint"/>
</instruction>
- <instruction name="3DSTATE_VF_STATISTICS" bias="1" length="1">
+ <instruction name="3DSTATE_VF_STATISTICS" bias="1" length="1" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="1"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2297,7 +2297,7 @@
<field name="Statistics Enable" start="0" end="0" type="bool"/>
</instruction>
- <instruction name="3DSTATE_VF_TOPOLOGY" bias="2" length="2">
+ <instruction name="3DSTATE_VF_TOPOLOGY" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2306,7 +2306,7 @@
<field name="Primitive Topology Type" start="32" end="37" type="3D_Prim_Topo_Type"/>
</instruction>
- <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_CC" bias="2" length="2">
+ <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_CC" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2315,7 +2315,7 @@
<field name="CC Viewport Pointer" start="37" end="63" type="offset"/>
</instruction>
- <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_SF_CLIP" bias="2" length="2">
+ <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_SF_CLIP" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2324,7 +2324,7 @@
<field name="SF Clip Viewport Pointer" start="38" end="63" type="offset"/>
</instruction>
- <instruction name="3DSTATE_VS" bias="2" length="9">
+ <instruction name="3DSTATE_VS" bias="2" length="9" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2367,7 +2367,7 @@
<field name="User Clip Distance Cull Test Enable Bitmask" start="256" end="263" type="uint"/>
</instruction>
- <instruction name="3DSTATE_WM" bias="2" length="2">
+ <instruction name="3DSTATE_WM" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2424,7 +2424,7 @@
</field>
</instruction>
- <instruction name="3DSTATE_WM_CHROMAKEY" bias="2" length="2">
+ <instruction name="3DSTATE_WM_CHROMAKEY" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2433,7 +2433,7 @@
<field name="ChromaKey Kill Enable" start="63" end="63" type="bool"/>
</instruction>
- <instruction name="3DSTATE_WM_DEPTH_STENCIL" bias="2" length="4">
+ <instruction name="3DSTATE_WM_DEPTH_STENCIL" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2461,7 +2461,7 @@
<field name="Backface Stencil Reference Value" start="96" end="103" type="uint"/>
</instruction>
- <instruction name="3DSTATE_WM_HZ_OP" bias="2" length="5">
+ <instruction name="3DSTATE_WM_HZ_OP" bias="2" length="5" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2483,7 +2483,7 @@
<field name="Sample Mask" start="128" end="143" type="uint"/>
</instruction>
- <instruction name="GPGPU_CSR_BASE_ADDRESS" bias="2" length="3">
+ <instruction name="GPGPU_CSR_BASE_ADDRESS" bias="2" length="3" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="0"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2492,7 +2492,7 @@
<field name="GPGPU CSR Base Address" start="44" end="95" type="address"/>
</instruction>
- <instruction name="GPGPU_WALKER" bias="2" length="15">
+ <instruction name="GPGPU_WALKER" bias="2" length="15" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2521,7 +2521,7 @@
<field name="Bottom Execution Mask" start="448" end="479" type="uint"/>
</instruction>
- <instruction name="MEDIA_CURBE_LOAD" bias="2" length="4">
+ <instruction name="MEDIA_CURBE_LOAD" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2531,7 +2531,7 @@
<field name="CURBE Data Start Address" start="96" end="127" type="uint"/>
</instruction>
- <instruction name="MEDIA_INTERFACE_DESCRIPTOR_LOAD" bias="2" length="4">
+ <instruction name="MEDIA_INTERFACE_DESCRIPTOR_LOAD" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2541,7 +2541,7 @@
<field name="Interface Descriptor Data Start Address" start="96" end="127" type="offset"/>
</instruction>
- <instruction name="MEDIA_OBJECT" bias="2">
+ <instruction name="MEDIA_OBJECT" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Media Command Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2581,7 +2581,7 @@
</group>
</instruction>
- <instruction name="MEDIA_OBJECT_GRPID" bias="2">
+ <instruction name="MEDIA_OBJECT_GRPID" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Media Command Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2618,7 +2618,7 @@
</group>
</instruction>
- <instruction name="MEDIA_OBJECT_PRT" bias="2" length="16">
+ <instruction name="MEDIA_OBJECT_PRT" bias="2" length="16" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2636,7 +2636,7 @@
</group>
</instruction>
- <instruction name="MEDIA_OBJECT_WALKER" bias="2">
+ <instruction name="MEDIA_OBJECT_WALKER" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2690,7 +2690,7 @@
</group>
</instruction>
- <instruction name="MEDIA_STATE_FLUSH" bias="2" length="2">
+ <instruction name="MEDIA_STATE_FLUSH" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2701,7 +2701,7 @@
<field name="Interface Descriptor Offset" start="32" end="37" type="uint"/>
</instruction>
- <instruction name="MEDIA_VFE_STATE" bias="2" length="9">
+ <instruction name="MEDIA_VFE_STATE" bias="2" length="9" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Pipeline" start="27" end="28" type="uint" default="2"/>
<field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2811,7 +2811,7 @@
<field name="Batch Buffer Start Address" start="34" end="95" type="address"/>
</instruction>
- <instruction name="MI_CLFLUSH" bias="2">
+ <instruction name="MI_CLFLUSH" bias="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="39"/>
<field name="Use Global GTT" start="22" end="22" type="bool"/>
@@ -2847,7 +2847,7 @@
<field name="Source Memory Address" start="98" end="159" type="address"/>
</instruction>
- <instruction name="MI_DISPLAY_FLIP" bias="2" length="3">
+ <instruction name="MI_DISPLAY_FLIP" bias="2" length="3" engine="render|blitter">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="20"/>
<field name="Async Flip Indicator" start="22" end="22" type="bool"/>
@@ -2918,7 +2918,7 @@
<field name="Destination Register Address" start="66" end="86" type="offset"/>
</instruction>
- <instruction name="MI_LOAD_SCAN_LINES_EXCL" bias="2" length="2">
+ <instruction name="MI_LOAD_SCAN_LINES_EXCL" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="19"/>
<field name="Display (Plane) Select" start="19" end="21" type="uint">
@@ -2931,7 +2931,7 @@
<field name="End Scan Line Number" start="32" end="44" type="uint"/>
</instruction>
- <instruction name="MI_LOAD_SCAN_LINES_INCL" bias="2" length="2">
+ <instruction name="MI_LOAD_SCAN_LINES_INCL" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="18"/>
<field name="Display (Plane) Select" start="19" end="21" type="uint">
@@ -2994,7 +2994,7 @@
<field name="MI Command Opcode" start="23" end="28" type="uint" default="7"/>
</instruction>
- <instruction name="MI_REPORT_PERF_COUNT" bias="2" length="4">
+ <instruction name="MI_REPORT_PERF_COUNT" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="40"/>
<field name="DWord Length" start="0" end="5" type="uint" default="2"/>
@@ -3004,7 +3004,7 @@
<field name="Report ID" start="96" end="127" type="uint"/>
</instruction>
- <instruction name="MI_RS_CONTEXT" bias="1" length="1">
+ <instruction name="MI_RS_CONTEXT" bias="1" length="1" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="15"/>
<field name="Resource Streamer Save" start="0" end="0" type="uint" prefix="RS">
@@ -3013,7 +3013,7 @@
</field>
</instruction>
- <instruction name="MI_RS_CONTROL" bias="1" length="1">
+ <instruction name="MI_RS_CONTROL" bias="1" length="1" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="6"/>
<field name="Resource Streamer Control" start="0" end="0" type="uint" prefix="RS">
@@ -3022,7 +3022,7 @@
</field>
</instruction>
- <instruction name="MI_RS_STORE_DATA_IMM" bias="2" length="4">
+ <instruction name="MI_RS_STORE_DATA_IMM" bias="2" length="4" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="43"/>
<field name="DWord Length" start="0" end="7" type="uint" default="2"/>
@@ -3163,7 +3163,7 @@
<field name="MI Command Opcode" start="23" end="28" type="uint" default="2"/>
</instruction>
- <instruction name="MI_WAIT_FOR_EVENT" bias="1" length="1">
+ <instruction name="MI_WAIT_FOR_EVENT" bias="1" length="1" engine="render|blitter">
<field name="Command Type" start="29" end="31" type="uint" default="0"/>
<field name="MI Command Opcode" start="23" end="28" type="uint" default="3"/>
<field name="Display Plane 1 C Vertical Blank Wait Enable" start="21" end="21" type="bool"/>
@@ -3186,7 +3186,7 @@
<field name="Display Plnae 1 A Scan Line Wait Enable" start="0" end="0" type="bool"/>
</instruction>
- <instruction name="PIPELINE_SELECT" bias="1" length="1">
+ <instruction name="PIPELINE_SELECT" bias="1" length="1" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="1"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -3201,7 +3201,7 @@
</field>
</instruction>
- <instruction name="PIPE_CONTROL" bias="2" length="6">
+ <instruction name="PIPE_CONTROL" bias="2" length="6" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="3"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="2"/>
@@ -3244,7 +3244,7 @@
<field name="Immediate Data" start="128" end="191" type="uint"/>
</instruction>
- <instruction name="STATE_BASE_ADDRESS" bias="2" length="19">
+ <instruction name="STATE_BASE_ADDRESS" bias="2" length="19" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="0"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -3280,7 +3280,7 @@
<field name="Bindless Surface State Size" start="588" end="607" type="uint"/>
</instruction>
- <instruction name="STATE_PREFETCH" bias="2" length="2">
+ <instruction name="STATE_PREFETCH" bias="2" length="2" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="0"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -3290,7 +3290,7 @@
<field name="Prefetch Count" start="32" end="34" type="uint"/>
</instruction>
- <instruction name="STATE_SIP" bias="2" length="3">
+ <instruction name="STATE_SIP" bias="2" length="3" engine="render">
<field name="Command Type" start="29" end="31" type="uint" default="3"/>
<field name="Command SubType" start="27" end="28" type="uint" default="0"/>
<field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
--
2.17.1
More information about the mesa-dev
mailing list