[Mesa-dev] [PATCH v2] anv/device: fix maximum number of images supported
Iago Toral
itoral at igalia.com
Fri Jan 11 12:40:37 UTC 2019
On Fri, 2019-01-11 at 12:31 +0000, Lionel Landwerlin wrote:
> On 11/01/2019 12:12, Iago Toral Quiroga wrote:
> > We had defined MAX_IMAGES as 8, which we used to size the array for
> > image push constant data. The comment there stated that this was
> > for
> > gen8, but anv_nir_apply_pipeline_layout runs for all gens and
> > writes
> > that array, asserting that we don't exceed that number of images,
> > which imposes a limit of MAX_IMAGES on all gens.
> >
> > Furthermore, despite this, we are exposing up to 64 images per
> > shader
> > stage on all gens, gen8 included.
> >
> > This patch lowers the number of images we expose in gen8 to 8 and
> > keeps 64 images for gen9+. It also sets MAX_IMAGES to 64 so we can
> > actually use up to 64 images in shaders, and then adds an assert
> > specific to gen8 to check that we never exceed 8.
> >
> > v2:
> > - <= instead of < in the assert (Eric, Lionel)
> > - Change the way the assertion is written (Eric)
> > ---
> > src/intel/vulkan/anv_device.c | 7 +++++--
> > src/intel/vulkan/anv_nir_apply_pipeline_layout.c | 3 ++-
> > src/intel/vulkan/anv_private.h | 4 ++--
> > 3 files changed, 9 insertions(+), 5 deletions(-)
> >
> > diff --git a/src/intel/vulkan/anv_device.c
> > b/src/intel/vulkan/anv_device.c
> > index 523f1483e2..f85458b672 100644
> > --- a/src/intel/vulkan/anv_device.c
> > +++ b/src/intel/vulkan/anv_device.c
> > @@ -987,9 +987,12 @@ void anv_GetPhysicalDeviceProperties(
> > const uint32_t max_samplers = (devinfo->gen >= 8 || devinfo-
> > >is_haswell) ?
> > 128 : 16;
> >
> > + const uint32_t max_images = devinfo->gen < 9 ? MAX_GEN8_IMAGES
> > : MAX_IMAGES;
> > +
> > VkSampleCountFlags sample_counts =
> > isl_device_get_sample_counts(&pdevice->isl_dev);
> >
> > +
> > VkPhysicalDeviceLimits limits = {
> > .maxImageDimension1D = (1 << 14),
> > .maxImageDimension2D = (1 << 14),
> > @@ -1009,7 +1012,7 @@ void anv_GetPhysicalDeviceProperties(
> > .maxPerStageDescriptorUniformBuffers = 64,
> > .maxPerStageDescriptorStorageBuffers = 64,
> > .maxPerStageDescriptorSampledImages = max_samplers,
> > - .maxPerStageDescriptorStorageImages = 64,
> > + .maxPerStageDescriptorStorageImages = max_images,
> > .maxPerStageDescriptorInputAttachments = 64,
> > .maxPerStageResources = 250,
> > .maxDescriptorSetSamplers = 6 *
> > max_samplers, /* number of stages * maxPerStageDescriptorSamplers
> > */
> > @@ -1018,7 +1021,7 @@ void anv_GetPhysicalDeviceProperties(
> > .maxDescriptorSetStorageBuffers = 6 *
> > 64, /* number of stages *
> > maxPerStageDescriptorStorageBuffers */
> > .maxDescriptorSetStorageBuffersDynamic =
> > MAX_DYNAMIC_BUFFERS / 2,
> > .maxDescriptorSetSampledImages = 6 *
> > max_samplers, /* number of stages *
> > maxPerStageDescriptorSampledImages */
> > - .maxDescriptorSetStorageImages = 6 *
> > 64, /* number of stages *
> > maxPerStageDescriptorStorageImages */
> > + .maxDescriptorSetStorageImages = 6 *
> > max_images, /* number of stages *
> > maxPerStageDescriptorStorageImages */
> > .maxDescriptorSetInputAttachments = 256,
> > .maxVertexInputAttributes = MAX_VBS,
> > .maxVertexInputBindings = MAX_VBS,
> > diff --git a/src/intel/vulkan/anv_nir_apply_pipeline_layout.c
> > b/src/intel/vulkan/anv_nir_apply_pipeline_layout.c
> > index b3daf702bc..53de347b3c 100644
> > --- a/src/intel/vulkan/anv_nir_apply_pipeline_layout.c
> > +++ b/src/intel/vulkan/anv_nir_apply_pipeline_layout.c
> > @@ -529,7 +529,8 @@ anv_nir_apply_pipeline_layout(const struct
> > anv_physical_device *pdevice,
> > }
> >
> > if (map->image_count > 0) {
> > - assert(map->image_count <= MAX_IMAGES);
> > + assert((pdevice->compiler->devinfo->gen <= 8 && map-
> > >image_count <= MAX_GEN8_IMAGES) ||
> > + map->image_count <= MAX_IMAGES);
>
>
> I'm not sure why it wasn't < instead of <= previously, sounds like
> it
> should be <.
I think <= is fine, map->image_count is not an index but the total
count so its value should be fine up to the maximum allowed, right?
>
> Also I don't think this version works, your previous version was okay
> :
>
>
> image_count < MAX_GEN8_IMAGE || (gen > 8 && image_count < MAX_IMAGES)
Right, I didn't read Eric's proposal properly, and it would not work
for gen8. I'll revert the form of the assertion to the previous
version.
>
> > assert(shader->num_uniforms == prog_data->nr_params * 4);
> > state.first_image_uniform = shader->num_uniforms;
> > uint32_t *param = brw_stage_prog_data_add_params(prog_data,
> > diff --git a/src/intel/vulkan/anv_private.h
> > b/src/intel/vulkan/anv_private.h
> > index 770254e93e..9ddd41b1fa 100644
> > --- a/src/intel/vulkan/anv_private.h
> > +++ b/src/intel/vulkan/anv_private.h
> > @@ -157,7 +157,8 @@ struct gen_l3_config;
> > #define MAX_SCISSORS 16
> > #define MAX_PUSH_CONSTANTS_SIZE 128
> > #define MAX_DYNAMIC_BUFFERS 16
> > -#define MAX_IMAGES 8
> > +#define MAX_IMAGES 64
> > +#define MAX_GEN8_IMAGES 8
> > #define MAX_PUSH_DESCRIPTORS 32 /* Minimum requirement */
> >
> > /* The kernel relocation API has a limitation of a 32-bit delta
> > value
> > @@ -1882,7 +1883,6 @@ struct anv_push_constants {
> > /* Used for vkCmdDispatchBase */
> > uint32_t base_work_group_id[3];
> >
> > - /* Image data for image_load_store on pre-SKL */
> > struct brw_image_param images[MAX_IMAGES];
> > };
> >
>
>
>
More information about the mesa-dev
mailing list