[Mesa-dev] [PATCH] egl/dri2: try to bind old context if bindContext failed

[Frank Binns]

Hi Luigi,

Luigi Santivetti <luigi.santivetti at imgtec.com> writes:

> Before this change, if bindContext() failed then dri2_make_current() would
> rebind the old EGL context and surfaces and return EGL_BAD_MATCH. However,
> it wouldn't rebind the DRI context and surfaces, thus leaving it in an
> inconsistent and unrecoverable state.
>
> After this change, dri2_make_current() tries to bind the old DRI context
> and surfaces when bindContext() failed. If unable to do so, it leaves EGL
> and the DRI driver in a consistent state, it reports an error and returns
> EGL_BAD_MATCH.
>
> Fixes: 4e8f95f64d004aa1 ("egl_dri2: Always unbind old contexts")
>
> Signed-off-by: Luigi Santivetti <luigi.santivetti at imgtec.com>
> ---
>  src/egl/drivers/dri2/egl_dri2.c | 54 ++++++++++++++++++++++++++-------
>  1 file changed, 43 insertions(+), 11 deletions(-)
>
> diff --git a/src/egl/drivers/dri2/egl_dri2.c b/src/egl/drivers/dri2/egl_dri2.c
> index dca22762047..016a3ced96d 100644
> --- a/src/egl/drivers/dri2/egl_dri2.c
> +++ b/src/egl/drivers/dri2/egl_dri2.c
> @@ -1648,8 +1648,9 @@ dri2_make_current(_EGLDriver *drv, _EGLDisplay *disp, _EGLSurface *dsurf,
>     _EGLSurface *old_dsurf, *old_rsurf;
>     _EGLSurface *tmp_dsurf, *tmp_rsurf;
>     __DRIdrawable *ddraw, *rdraw;
> -   __DRIcontext *cctx;
> +   __DRIcontext *cctx, *old_cctx;
>     EGLBoolean unbind;
> +   EGLint egl_error;
>  
>     if (!dri2_dpy)
>        return _eglError(EGL_NOT_INITIALIZED, "eglMakeCurrent");
> @@ -1674,7 +1675,7 @@ dri2_make_current(_EGLDriver *drv, _EGLDisplay *disp, _EGLSurface *dsurf,
>     cctx = (dri2_ctx) ? dri2_ctx->dri_context : NULL;
>  
>     if (old_ctx) {
> -      __DRIcontext *old_cctx = dri2_egl_context(old_ctx)->dri_context;
> +      old_cctx = dri2_egl_context(old_ctx)->dri_context;
>  
>        if (old_dsurf)
>           dri2_surf_update_fence_fd(old_ctx, disp, old_dsurf);
> @@ -1691,17 +1692,24 @@ dri2_make_current(_EGLDriver *drv, _EGLDisplay *disp, _EGLSurface *dsurf,
>     unbind = (cctx == NULL && ddraw == NULL && rdraw == NULL);
>  
>     if (!unbind && !dri2_dpy->core->bindContext(cctx, ddraw, rdraw)) {
> +      __DRIdrawable *old_ddraw, *old_rdraw;
> +
> +      /* dri2_dpy->core->bindContext failed. We cannot tell for sure why, but
> +       * setting the error to EGL_BAD_MATCH is surely better than leaving it
> +       * as EGL_SUCCESS.
> +       */
> +      egl_error = EGL_BAD_MATCH;
> +
> +      old_ddraw = (old_dsurf) ? dri2_dpy->vtbl->get_dri_drawable(old_dsurf) : NULL;
> +      old_rdraw = (old_rsurf) ? dri2_dpy->vtbl->get_dri_drawable(old_rsurf) : NULL;
> +      old_cctx = (old_ctx) ? dri2_egl_context(old_ctx)->dri_context : NULL;
> +
>        /* undo the previous _eglBindContext */
>        _eglBindContext(old_ctx, old_dsurf, old_rsurf, &ctx, &tmp_dsurf, &tmp_rsurf);
>        assert(&dri2_ctx->base == ctx &&
>               tmp_dsurf == dsurf &&
>               tmp_rsurf == rsurf);
>  
> -      if (old_dsurf && _eglSurfaceInSharedBufferMode(old_dsurf) &&
> -          old_dri2_dpy->vtbl->set_shared_buffer_mode) {
> -         old_dri2_dpy->vtbl->set_shared_buffer_mode(old_disp, old_dsurf, true);
> -      }
> -
>        _eglPutSurface(dsurf);
>        _eglPutSurface(rsurf);
>        _eglPutContext(ctx);
> @@ -1710,11 +1718,32 @@ dri2_make_current(_EGLDriver *drv, _EGLDisplay *disp, _EGLSurface *dsurf,
>        _eglPutSurface(old_rsurf);
>        _eglPutContext(old_ctx);
>  
> -      /* dri2_dpy->core->bindContext failed. We cannot tell for sure why, but
> -       * setting the error to EGL_BAD_MATCH is surely better than leaving it
> -       * as EGL_SUCCESS.
> +      /* undo the previous dri2_dpy->core->unbindContext */
> +      if (dri2_dpy->core->bindContext(old_cctx, old_ddraw, old_rdraw)) {
> +         if (old_dsurf && _eglSurfaceInSharedBufferMode(old_dsurf) &&
> +             old_dri2_dpy->vtbl->set_shared_buffer_mode) {
> +            old_dri2_dpy->vtbl->set_shared_buffer_mode(old_disp, old_dsurf, true);
> +         }
> +
> +         return _eglError(egl_error, "eglMakeCurrent");
> +      }
> +
> +      /* We cannot restore the same state as it was before calling
> +       * eglMakeCurrent(), but we can keep EGL in a consistent state with
> +       * the DRI driver by unbinding the old EGL context and surfaces.
>         */
> -      return _eglError(EGL_BAD_MATCH, "eglMakeCurrent");
> +      ctx = dsurf = rsurf = NULL;

This line causes:
  warning: assignment from incompatible pointer type [-Wincompatible-pointer-types]

With that fixed this gets my:
Reviewed-by: Frank Binns <frank.binns at imgtec.com>

> +      unbind = true;
> +
> +      _eglBindContext(ctx, dsurf, rsurf, &old_ctx, &tmp_dsurf, &tmp_rsurf);
> +      assert(&dri2_ctx->base == old_ctx &&
> +             tmp_dsurf == old_dsurf &&
> +             tmp_rsurf == old_rsurf);
> +
> +      _eglLog(_EGL_FATAL, "DRI2: failed to rebind the previous context");
> +   } else {
> +      /* We can no longer fail at this point. */
> +      egl_error = EGL_SUCCESS;
>     }
>  
>     dri2_destroy_surface(drv, disp, old_dsurf);
> @@ -1740,6 +1769,9 @@ dri2_make_current(_EGLDriver *drv, _EGLDisplay *disp, _EGLSurface *dsurf,
>        dri2_dpy->vtbl->set_shared_buffer_mode(disp, dsurf, mode);
>     }
>  
> +   if (egl_error != EGL_SUCCESS)
> +      return _eglError(egl_error, "eglMakeCurrent");
> +
>     return EGL_TRUE;
>  }