[Mesa-dev] [PATCH 2/9] anv: Set the values for the VkPhysicalDeviceSampleLocationsPropertiesEXT

[Sagar Ghuge]

On Mon, 2019-03-11 at 17:04 +0200, Eleni Maria Stea wrote:
> The VkPhysicalDeviceSampleLocationPropertiesEXT struct is filled with
> implementation dependent values and according to the table from the
> Vulkan Specification section [36.1. Limit Requirements]:
> 
> pname | max | min
> pname:sampleLocationSampleCounts   |-            |ename:VK_SAMPLE_COU
> NT_4_BIT
> pname:maxSampleLocationGridSize    |-            |(1, 1)
> pname:sampleLocationCoordinateRange|(0.0, 0.9375)|(0.0, 0.9375)
> pname:sampleLocationSubPixelBits   |-            |4
> pname:variableSampleLocations      | false       |implementation
> dependent
> 
> The hardware only supports setting the same sample location for all
> the
> pixels, so we only support 1x1 grids.
> 
> Also, variableSampleLocations is set to false because we don't
> support the
> feature.
> ---
>  src/intel/vulkan/anv_device.c  | 21 +++++++++++++++++++++
>  src/intel/vulkan/anv_private.h |  3 +++
>  2 files changed, 24 insertions(+)
> 
> diff --git a/src/intel/vulkan/anv_device.c
> b/src/intel/vulkan/anv_device.c
> index 729cceb3e32..1e183b7f4ad 100644
> --- a/src/intel/vulkan/anv_device.c
> +++ b/src/intel/vulkan/anv_device.c
> @@ -1401,6 +1401,27 @@ void anv_GetPhysicalDeviceProperties2(
>           break;
>        }
>  
> +      case
> VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_SAMPLE_LOCATIONS_PROPERTIES_EXT: {
> +         VkPhysicalDeviceSampleLocationsPropertiesEXT *props =
> +            (VkPhysicalDeviceSampleLocationsPropertiesEXT *)ext;
> +         props->sampleLocationSampleCounts = ISL_SAMPLE_COUNT_2_BIT
> |
> +                                             ISL_SAMPLE_COUNT_4_BIT
> |
> +                                             ISL_SAMPLE_COUNT_8_BIT;
> +         if (pdevice->info.gen >= 9)
> +            props->sampleLocationSampleCounts |=
> ISL_SAMPLE_COUNT_16_BIT;
Hi Eleni,

Thanks for the series.

"isl_device_get_sample_counts" method figure out values according to
platform so maybe we can make use of it and ignore
ISL_SAMPLE_COUNT_1_BIT. So that we don't have to take care of values
according to platform here. 

I am not sure about this, so it might be a good idea to consult with
Jason/Lionel once. :)
> +
> +         props->maxSampleLocationGridSize.width = SAMPLE_LOC_GRID_W;
> +         props->maxSampleLocationGridSize.height =
> SAMPLE_LOC_GRID_H;
> +
> +         props->sampleLocationCoordinateRange[0] = 0;
> +         props->sampleLocationCoordinateRange[1] = 0.9375;
> +         props->sampleLocationSubPixelBits = 4;
> +
> +         props->variableSampleLocations = false;
Just for consistency, doesn't make any difference but can we use
VK_FALSE instead of false.

with or without the fix, this patch is:

Reviewed-by: Sagar Ghuge <sagar.ghuge at intel.com>
> +
> +         break;
> +      }
> +
>        default:
>           anv_debug_ignored_stype(ext->sType);
>           break;
> diff --git a/src/intel/vulkan/anv_private.h
> b/src/intel/vulkan/anv_private.h
> index eed282ff985..5905299e59d 100644
> --- a/src/intel/vulkan/anv_private.h
> +++ b/src/intel/vulkan/anv_private.h
> @@ -195,6 +195,9 @@ struct gen_l3_config;
>  
>  #define anv_printflike(a, b) __attribute__((__format__(__printf__,
> a, b)))
>  
> +#define SAMPLE_LOC_GRID_W 1
> +#define SAMPLE_LOC_GRID_H 1
> +
>  static inline uint32_t
>  align_down_npot_u32(uint32_t v, uint32_t a)
>  {