[Mesa-dev] [Intel-gfx] [RFC 2/2] drm/doc/rfc: i915 new parallel submission uAPI plan
Matthew Brost
matthew.brost at intel.com
Fri May 21 16:20:57 UTC 2021
On Thu, May 20, 2021 at 09:44:59PM +0200, Daniel Vetter wrote:
> On Thu, May 20, 2021 at 08:10:59AM -0700, Matthew Brost wrote:
> > On Thu, May 20, 2021 at 11:54:25AM +0200, Daniel Vetter wrote:
> > > On Wed, May 19, 2021 at 7:19 PM Matthew Brost <matthew.brost at intel.com> wrote:
> > > >
> > > > On Wed, May 19, 2021 at 01:10:04PM +0200, Daniel Vetter wrote:
> > > > > On Tue, May 18, 2021 at 04:58:30PM -0700, Matthew Brost wrote:
> > > > > > Add entry fpr i915 new parallel submission uAPI plan.
> > > > > >
> > > > > > v2:
> > > > > > (Daniel Vetter):
> > > > > > - Expand logical order explaination
> > > > > > - Add dummy header
> > > > > > - Only allow N BBs in execbuf IOCTL
> > > > > > - Configure parallel submission per slot not per gem context
> > > > > >
> > > > > > Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
> > > > > > Cc: Tony Ye <tony.ye at intel.com>
> > > > > > CC: Carl Zhang <carl.zhang at intel.com>
> > > > > > Cc: Daniel Vetter <daniel.vetter at intel.com>
> > > > > > Cc: Jason Ekstrand <jason at jlekstrand.net>
> > > > > > Signed-off-by: Matthew Brost <matthew.brost at intel.com>
> > > > > > ---
> > > > > > Documentation/gpu/rfc/i915_parallel_execbuf.h | 144 ++++++++++++++++++
> > > > > > Documentation/gpu/rfc/i915_scheduler.rst | 53 ++++++-
> > > > > > 2 files changed, 196 insertions(+), 1 deletion(-)
> > > > > > create mode 100644 Documentation/gpu/rfc/i915_parallel_execbuf.h
> > > > > >
> > > > > > diff --git a/Documentation/gpu/rfc/i915_parallel_execbuf.h b/Documentation/gpu/rfc/i915_parallel_execbuf.h
> > > > > > new file mode 100644
> > > > > > index 000000000000..8c64b983ccad
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/gpu/rfc/i915_parallel_execbuf.h
> > > > > > @@ -0,0 +1,144 @@
> > > > > > +#define I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT 2 /* see i915_context_engines_parallel_submit */
> > > > > > +
> > > > > > +/*
> > > > > > + * i915_context_engines_parallel_submit:
> > > > > > + *
> > > > > > + * Setup a slot to allow multiple BBs to be submitted in a single execbuf IOCTL.
> > > > > > + * Those BBs will then be scheduled to run on the GPU in parallel. Multiple
> > > > > > + * hardware contexts are created internally in the i915 run these BBs. Once a
> > > > > > + * slot is configured for N BBs only N BBs can be submitted in each execbuf
> > > > > > + * IOCTL and this is implict behavior (e.g. the user doesn't tell the execbuf
> > > > > > + * IOCTL there are N BBs, the execbuf IOCTL know how many BBs there are based on
> > > > > > + * the slots configuration).
> > > > > > + *
> > > > > > + * Their are two currently defined ways to control the placement of the
> > > > > > + * hardware contexts on physical engines: default behavior (no flags) and
> > > > > > + * I915_PARALLEL_IMPLICT_BONDS (a flag). More flags may be added the in the
> > > > > > + * future as new hardware / use cases arise. Details of how to use this
> > > > > > + * interface below above the flags.
> > > > > > + *
> > > > > > + * Returns -EINVAL if hardware context placement configuration invalid or if the
> > > > > > + * placement configuration isn't supported on the platform / submission
> > > > > > + * interface.
> > > > > > + * Returns -ENODEV if extension isn't supported on the platform / submission
> > > > > > + * inteface.
> > > > > > + */
> > > > > > +struct i915_context_engines_parallel_submit {
> > > > > > + struct i915_user_extension base;
> > > > > > +
> > > > > > + __u16 engine_index; /* slot for parallel engine */
> > > > > > + __u16 width; /* number of contexts per parallel engine */
> > > > > > + __u16 num_siblings; /* number of siblings per context */
> > > > > > + __u16 mbz16;
> > > > >
> > > > > Ok the big picture looks reasonable now, the flags still confuse me.
> > > > >
> > > >
> > > > Yea, it is a bit confusing.
> > > >
> > > > > > +/*
> > > > > > + * Default placement behvavior (currently unsupported):
> > > > > > + *
> > > > > > + * Rather than restricting parallel submission to a single class with a
> > > > > > + * logically contiguous placement (I915_PARALLEL_IMPLICT_BONDS), add a mode that
> > > > > > + * enables parallel submission across multiple engine classes. In this case each
> > > > > > + * context's logical engine mask indicates where that context can placed. It is
> > > > > > + * implied in this mode that all contexts have mutual exclusive placement (e.g.
> > > > > > + * if one context is running CS0 no other contexts can run on CS0).
> > > > > > + *
> > > > > > + * Example 1 pseudo code:
> > > > > > + * CSX[Y] = engine class X, logical instance Y
> > > > > > + * INVALID = I915_ENGINE_CLASS_INVALID, I915_ENGINE_CLASS_INVALID_NONE
> > > > > > + * set_engines(INVALID)
> > > > > > + * set_parallel(engine_index=0, width=2, num_siblings=2,
> > > > > > + * engines=CS0[0],CS0[1],CS1[0],CS1[1])
> > > > > > + *
> > > > > > + * Results in the following valid placements:
> > > > > > + * CS0[0], CS1[0]
> > > > > > + * CS0[0], CS1[1]
> > > > > > + * CS0[1], CS1[0]
> > > > > > + * CS0[1], CS1[1]
> > > > > > + *
> > > > > > + * This can also be though of as 2 virtual engines:
> > > > > > + * VE[0] = CS0[0], CS0[1]
> > > > > > + * VE[1] = CS1[0], CS1[1]
> > > > > > + *
> > > > > > + * Example 2 pseudo code:
> > > > > > + * CS[X] = generic engine of same class, logical instance X
> > > > > > + * INVALID = I915_ENGINE_CLASS_INVALID, I915_ENGINE_CLASS_INVALID_NONE
> > > > > > + * set_engines(INVALID)
> > > > > > + * set_parallel(engine_index=0, width=2, num_siblings=3,
> > > > > > + * engines=CS[0],CS[1],CS[2],CS[0],CS[1],CS[2])
> > > > > > + *
> > > > > > + * Results in the following valid placements:
> > > > > > + * CS[0], CS[1]
> > > > > > + * CS[0], CS[2]
> > > > > > + * CS[1], CS[0]
> > > > > > + * CS[1], CS[2]
> > > > > > + * CS[2], CS[0]
> > > > > > + * CS[2], CS[1]
> > > > > > + *
> > > > > > + *
> > > > > > + * This can also be though of as 2 virtual engines:
> > > > > > + * VE[0] = CS[0], CS[1], CS[2]
> > > > > > + * VE[1] = CS[0], CS[1], CS[2]
> > > > > > +
> > > > > > + * This enables a use case where all engines are created equally, we don't care
> > > > > > + * where they are scheduled, we just want a certain number of resources, for
> > > > > > + * those resources to be scheduled in parallel, and possibly across multiple
> > > > > > + * engine classes.
> > > > > > + */
> > > > >
> > > > > So I don't really get what this does compared to setting the flag below.
> > > > > Is this just about running the batchbuffers the wrong way round, i.e. if
> > > > > you have (simplest case)
> > > > >
> > > > > width=2, num_sibglings=1, engines=CS[0], CS[1]
> > > > >
> > > > > Then both
> > > > > CS[0], CS[1]
> > > > > and
> > > > > CS[1], CS[0]
> > > > > are possible options for running 2 batches? Iow, the backend is allowed to
> > > > > run the batchbuffers the wrong way round, which gains us nothing, since we
> > > > > assume the batches take equally long and engines interchangeable. There is
> > > > > no scheduling scenario where this additional flexibility can help.
> > > > >
> > > > > Also we don't have flags to select the only available and then specify an
> > > > > entire pipe dream about what the non-flag mode does, without an
> > > > > implementation. What is this about?
> > > > >
> > > > > If it's just "because bonded allowed this" then I think we should just
> > > > > unceremonously ditch this. Bummer for the nice kerenldoc you wrote, but
> > > > > welp.
> > > > >
> > > >
> > > > High level the flags came out of internal discussions how this interface
> > > > should look. The default placement behavior is theoretically possible
> > > > with execlists but has no use cases. The GuC supports / current use
> > > > cases are a subset of what is possible with I915_PARALLEL_IMPLICT_BONDS.
> > > >
> > > > Argued about for months and this is where we landed. At the end of the
> > > > day I think we needed to show that this interface supports more
> > > > placement rules than what the GuC supports / current use cases to future
> > > > proof this interface.
> > > >
> > > > For what is it worth it seems kinda backwards that we landed on the
> > > > default behavior not being supported in our current stack / HW.
> > >
> > > Yeah I think that should be inverted, doesn't make sense.
> > >
> > > What I still don't get (and I've read Tvrtko's reply with the example)
> > > is what exactly is the difference between implicit and not implicit
> > > mode? Can you do a single example where the only difference is whether
> > > this flag is set, and then explain with that what are the actual
> > > differences in scheduling options that the backend is allowed to pick
> > > for the set of N patches?
> > >
> > > I'm feeling a bit dense, but I'm really not seeing what's even going on here :-(
> > >
> > > > > > +
> > > > > > +/*
> > > > > > + * I915_PARALLEL_IMPLICT_BONDS - Create implict bonds between each context.
> > > > > > + * Each context must have the same number sibling and bonds are implictly create
> > > > > > + * of the siblings.
> > > > > > + *
> > > > > > + * All of the below examples are in logical space.
> > > > > > + *
> > > > > > + * Example 1 pseudo code:
> > > > > > + * CS[X] = generic engine of same class, logical instance X
> > > > > > + * INVALID = I915_ENGINE_CLASS_INVALID, I915_ENGINE_CLASS_INVALID_NONE
> > > > > > + * set_engines(INVALID)
> > > > > > + * set_parallel(engine_index=0, width=2, num_siblings=1,
> > > > > > + * engines=CS[0],CS[1], flags=I915_PARALLEL_IMPLICT_BONDS)
> > > > > > + *
> > > > > > + * Results in the following valid placements:
> > > > > > + * CS[0], CS[1]
> > > > > > + *
> > > > > > + * Example 2 pseudo code:
> > > > > > + * CS[X] = generic engine of same class, logical instance X
> > > > > > + * INVALID = I915_ENGINE_CLASS_INVALID, I915_ENGINE_CLASS_INVALID_NONE
> > > > > > + * set_engines(INVALID)
> > > > > > + * set_parallel(engine_index=0, width=2, num_siblings=2,
> > > > > > + * engines=CS[0],CS[2],CS[1],CS[3], flags=I915_PARALLEL_IMPLICT_BONDS)
> > > > > > + *
> > > > > > + * Results in the following valid placements:
> > > > > > + * CS[0], CS[1]
> > > > > > + * CS[2], CS[3]
> > > > > > + *
> > > > > > + * This can also be though of as 2 virtual engines:
> > > > > > + * VE[0] = CS[0], CS[2]
> > > > > > + * VE[1] = CS[1], CS[3]
> > > > > > + *
> > > > > > + * This enables a use case where all engines are not equal and certain placement
> > > > > > + * rules are required (i.e. split-frame requires all contexts to be placed in a
> > > > > > + * logically contiguous order on the VCS engines on gen11+ platforms). This use
> > > > > > + * case (logically contiguous placement, within a single engine class) is
> > > > > > + * supported when using GuC submission. Execlist mode could support all possible
> > > > > > + * bonding configurations but currently doesn't support this extension.
> > > > > > + */
> > > > > > +#define I915_PARALLEL_IMPLICT_BONDS (1<<0)
> > > > >
> > > > > Does this map to intel_context_set_nopreempt(), so we could implement it
> > > > > also in execlist?
> > > > >
> > > >
> > > > intel_context_set_nopreempt is preempt is part of how this would be
> > > > implemented for execlists. For GuC submission there is a algorithm
> > > > between the i915 and GuC that inserts same preemption points between
> > > > each set of N batches. I believe the rules are if context 1 can
> > > > preempted the rest of the contexts (2 - N) can safely be preempted. A go
> > > > / join algorithm, implemented with semaphores, around the batches
> > > > makes sure the i915 adheres to these rules.
> > > >
> > > > > Also is this just an artifact of the implementation, or is this somehow
> > > > > required functionality for userspace, i.e. the workload fails if e.g. GuC
> > > > > decides to preempt all LRC of a parallel virtual engine? Of course just
> > > > > preempting one is a bit a bug (but execlist I think happily does that).
> > > > >
> > > >
> > > > I think it is part of the implementation / HW limitations. Basically if
> > > > N batches are running in parallel if one of the batches gets preempted
> > > > it can hang all the other batches even if it gets restarted. Again the
> > > > idea behind this is only preempt any of these contexts between each set
> > > > of N batches. The GuC has no concept of batches only contexts hence the
> > > > aforementioned algorithm to insert same preemption points between each
> > > > set of batches.
> > >
> > > Well backend preempting one but not the other is a bug. I don't think
> > > we need to talk about bugs :-)
> > >
> >
> > I think it is more that backend can't preempt each context atomically as these
> > are running on independent engines. Let say the backend tries to preempt 2
> > engines at the same time and only 1 responds, now we are broken with certain
> > batches. With the algorithm implmented between the i915 and the Guc the GuC will
> > try to preempt the first context if that works, all the other contexts can be
> > preempted.
>
> Ah right, we might have a workload with long non-preemptible sections, but
> I guess the MI_SEMAPHORE_WAIT can always preempt. So if GuC just tries on
> one of these, it will result in tears.
>
> > > Now wrt a preempt mode in context creation, I think that makes sense.
> > > I'm just wondering whether this is correct here in the parallel
> > > submission (and why), or is it just an implementation artifact
> > > (current backends are buggy if we'd allow them to preempt) or what's
> > > going on.
> > >
> > > If this is just a case of "this is how current backends work,
> > > userspace doesn't actually care whether we allow preempt or not" then
> > > I think we should just document the behavior and that's it. Adding
> > > uapi for an option for which there's not even an implementation isn't
> > > great.
> > >
> >
> > I don't think it is a case of 'this is how current backends work...', I think
> > user space knows if it is ok for 1 of the batches to preempted and not the
> > others without breaking the batches.
>
> Yeah this makes more sense as an explanation: Currently the backend (guc
> or execlist) figure out whether something can be preempted by just trying.
> Since we're dealing with N contexts that's a suboptimal approach, and we
> need a flag that indicates whether it's worth it or not.
>
> So makes sense to me to have this. I guess userspace does actually need
> both modes for now, depending upon what it's doing?
> -Daniel
I agree that is makes sense to have - an explict flag saying it isn't safe to
preempt one of the N batches by itself or letting the driver do whatever it
wants regarding preemption. The current use case is it can't preempt a single
batch but it may change going forward. Lastly, there is overhead to non-preempt
mid batch feature so being able to turn it off seems reasonable to me.
Matt
>
> >
> > Matt
> >
> > > But if we can actually choose, and userspace wants to, then I'm all
> > > fine with this. And we can always move this to a more generic place if
> > > other engines need preempt control later on too.
> > >
> > > Cheers, Daniel
> > >
> > >
> > > > Matt
> > > >
> > > > > Cheers, Daniel
> > > > >
> > > > > > +/*
> > > > > > + * Do not allow BBs to be preempted mid BB rather insert coordinated preemption
> > > > > > + * points on all hardware contexts between each set of BBs. An example use case
> > > > > > + * of this feature is split-frame on gen11+ hardware. When using this feature a
> > > > > > + * BB must be submitted on each hardware context in the parallel gem context.
> > > > > > + * The execbuf2 IOCTL enforces the user adheres to policy.
> > > > > > + */
> > > > > > +#define I915_PARALLEL_NO_PREEMPT_MID_BATCH (1<<1)
> > > > > > +#define __I915_PARALLEL_UNKNOWN_FLAGS (-(I915_PARALLEL_NO_PREEMPT_MID_BATCH << 1))
> > > > > > + __u64 flags; /* all undefined flags must be zero */
> > > > > > + __u64 mbz64[3]; /* reserved for future use; must be zero */
> > > > > > +
> > > > > > + /*
> > > > > > + * width (i) * num_siblings (j) in length
> > > > > > + * index = j + i * num_siblings
> > > > > > + */
> > > > > > + struct i915_engine_class_instance engines[0];
> > > > > > +} __attribute__ ((packed));
> > > > > > +
> > > > > > diff --git a/Documentation/gpu/rfc/i915_scheduler.rst b/Documentation/gpu/rfc/i915_scheduler.rst
> > > > > > index 7faa46cde088..64c539486ee4 100644
> > > > > > --- a/Documentation/gpu/rfc/i915_scheduler.rst
> > > > > > +++ b/Documentation/gpu/rfc/i915_scheduler.rst
> > > > > > @@ -82,4 +82,55 @@ https://spec.oneapi.com/level-zero/latest/core/api.html#ze-command-queue-priorit
> > > > > >
> > > > > > New parallel submission uAPI
> > > > > > ============================
> > > > > > -Details to come in a following patch.
> > > > > > +The existing bonding uAPI is completely broken with GuC submission because
> > > > > > +whether a submission is a single context submit or parallel submit isn't known
> > > > > > +until execbuf time activated via the I915_SUBMIT_FENCE. To submit multiple
> > > > > > +contexts in parallel with the GuC the context must be explictly registered with
> > > > > > +N contexts and all N contexts must be submitted in a single command to the GuC.
> > > > > > +These interfaces doesn't support dynamically changing between N contexts as the
> > > > > > +bonding uAPI does. Hence the need for a new parallel submission interface. Also
> > > > > > +the legacy bonding uAPI is quite confusing and not intuitive at all.
> > > > > > +
> > > > > > +The new parallel submission uAPI consists of 3 parts:
> > > > > > +
> > > > > > +* Export engines logical mapping
> > > > > > +* A 'set_parallel' extension to configure contexts for parallel
> > > > > > + submission
> > > > > > +* Extend execbuf2 IOCTL to support submitting N BBs in a single IOCTL
> > > > > > +
> > > > > > +Export engines logical mapping
> > > > > > +------------------------------
> > > > > > +Certain use cases require BBs to be placed on engine instances in logical order
> > > > > > +(e.g. split-frame on gen11+). The logical mapping of engine instances can change
> > > > > > +based on fusing. Rather than making UMDs be aware of fusing, simply expose the
> > > > > > +logical mapping with the existing query engine info IOCTL. Also the GuC
> > > > > > +submission interface currently only supports submitting multiple contexts to
> > > > > > +engines in logical order which is a new requirement compared to execlists.
> > > > > > +Lastly, all current platforms have at most 2 instances and the logical order is
> > > > > > +the same a uABI order. This will change on platforms with more than 2 instances.
> > > > > > +
> > > > > > +A single bit will be added to drm_i915_engine_info.flags indicating that the
> > > > > > +logical instance has been returned and a new field,
> > > > > > +drm_i915_engine_info.logical_instance, returns the logical instance.
> > > > > > +
> > > > > > +A 'set_parallel' extension to configure contexts for parallel submission
> > > > > > +------------------------------------------------------------------------
> > > > > > +The 'set_parallel' extension configures a slot for parallel submission of N BBs.
> > > > > > +It is setup step that should be called before using any of the contexts. See
> > > > > > +I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE or I915_CONTEXT_ENGINES_EXT_BOND for
> > > > > > +similar existing examples. Once a slot is configured for parallel submission the
> > > > > > +execbuf2 IOCTL can be called submiting N BBs in a single IOCTL. Initially only
> > > > > > +support GuC submission. Execlist support can be added later if needed.
> > > > > > +
> > > > > > +Add I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT and
> > > > > > +i915_context_engines_parallel_submit to the uAPI to implement this extension.
> > > > > > +
> > > > > > +Extend execbuf2 IOCTL to support submitting N BBs in a single IOCTL
> > > > > > +-------------------------------------------------------------------
> > > > > > +Contexts that have been configured with the 'set_parallel' extension are allowed
> > > > > > +to submit N BBs in a single execbuf2 IOCTL. The BBs are either the last N
> > > > > > +objects in the drm_i915_gem_exec_object2 list or the first N if
> > > > > > +I915_EXEC_BATCH_FIRST is set. The number of BBs is implict based on the slot
> > > > > > +submitted and how it has been configured by 'set_parallel' or other extensions.
> > > > > > +No uAPI changes in the execbuf IOCTL but worth mentioning the new behavior of
> > > > > > +the IOCTL.
> > > > > > --
> > > > > > 2.28.0
> > > > > >
> > > > > > _______________________________________________
> > > > > > Intel-gfx mailing list
> > > > > > Intel-gfx at lists.freedesktop.org
> > > > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > > > >
> > > > > --
> > > > > Daniel Vetter
> > > > > Software Engineer, Intel Corporation
> > > > > http://blog.ffwll.ch
> > >
> > >
> > >
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > http://blog.ffwll.ch
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
More information about the mesa-dev
mailing list