[PATCH 2/2] drm/doc: add rfc section for small BAR uapi
Thomas Hellström
thomas.hellstrom at linux.intel.com
Tue Feb 22 10:36:13 UTC 2022
On 2/18/22 12:22, Matthew Auld wrote:
> Add an entry for the new uapi needed for small BAR on DG2+.
>
> Signed-off-by: Matthew Auld <matthew.auld at intel.com>
> Cc: Thomas Hellström <thomas.hellstrom at linux.intel.com>
> Cc: Jon Bloomfield <jon.bloomfield at intel.com>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: Jordan Justen <jordan.l.justen at intel.com>
> Cc: Kenneth Graunke <kenneth at whitecape.org>
> Cc: mesa-dev at lists.freedesktop.org
> ---
> Documentation/gpu/rfc/i915_small_bar.h | 153 +++++++++++++++++++++++
> Documentation/gpu/rfc/i915_small_bar.rst | 40 ++++++
> Documentation/gpu/rfc/index.rst | 4 +
> 3 files changed, 197 insertions(+)
> create mode 100644 Documentation/gpu/rfc/i915_small_bar.h
> create mode 100644 Documentation/gpu/rfc/i915_small_bar.rst
>
> diff --git a/Documentation/gpu/rfc/i915_small_bar.h b/Documentation/gpu/rfc/i915_small_bar.h
> new file mode 100644
> index 000000000000..fa65835fd608
> --- /dev/null
> +++ b/Documentation/gpu/rfc/i915_small_bar.h
> @@ -0,0 +1,153 @@
> +/**
> + * struct __drm_i915_gem_create_ext - Existing gem_create behaviour, with added
> + * extension support using struct i915_user_extension.
> + *
> + * Note that in the future we want to have our buffer flags here,
Does this sentence need updating, with the flags member?
> at least for
> + * the stuff that is immutable. Previously we would have two ioctls, one to
> + * create the object with gem_create, and another to apply various parameters,
> + * however this creates some ambiguity for the params which are considered
> + * immutable. Also in general we're phasing out the various SET/GET ioctls.
> + */
> +struct __drm_i915_gem_create_ext {
> + /**
> + * @size: Requested size for the object.
> + *
> + * The (page-aligned) allocated size for the object will be returned.
> + *
> + * Note that for some devices we have might have further minimum
> + * page-size restrictions(larger than 4K), like for device local-memory.
> + * However in general the final size here should always reflect any
> + * rounding up, if for example using the I915_GEM_CREATE_EXT_MEMORY_REGIONS
> + * extension to place the object in device local-memory.
> + */
> + __u64 size;
> + /**
> + * @handle: Returned handle for the object.
> + *
> + * Object handles are nonzero.
> + */
> + __u32 handle;
> + /**
> + * @flags: Optional flags.
> + *
> + * Supported values:
> + *
> + * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS - Signal to the kernel that
> + * the object will need to be accessed via the CPU.
> + *
> + * Only valid when placing objects in I915_MEMORY_CLASS_DEVICE, and
> + * only strictly required on platforms where only some of the device
> + * memory is directly visible or mappable through the CPU, like on DG2+.
> + *
> + * One of the placements MUST also be I915_MEMORY_CLASS_SYSTEM, to
> + * ensure we can always spill the allocation to system memory, if we
> + * can't place the object in the mappable part of
> + * I915_MEMORY_CLASS_DEVICE.
> + *
> + * Note that buffers that need to be captured with EXEC_OBJECT_CAPTURE,
> + * will need to enable this hint, if the object can also be placed in
> + * I915_MEMORY_CLASS_DEVICE, starting from DG2+. The execbuf call will
> + * throw an error otherwise. This also means that such objects will need
> + * I915_MEMORY_CLASS_SYSTEM set as a possible placement.
> + *
> + * Without this hint, the kernel will assume that non-mappable
> + * I915_MEMORY_CLASS_DEVICE is preferred for this object. Note that the
> + * kernel can still migrate the object to the mappable part, as a last
> + * resort, if userspace ever CPU faults this object, but this might be
> + * expensive, and so ideally should be avoided.
> + */
> +#define I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS (1 << 0)
> + __u32 flags;
> + /**
> + * @extensions: The chain of extensions to apply to this object.
> + *
> + * This will be useful in the future when we need to support several
> + * different extensions, and we need to apply more than one when
> + * creating the object. See struct i915_user_extension.
> + *
> + * If we don't supply any extensions then we get the same old gem_create
> + * behaviour.
> + *
> + * For I915_GEM_CREATE_EXT_MEMORY_REGIONS usage see
> + * struct drm_i915_gem_create_ext_memory_regions.
> + *
> + * For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see
> + * struct drm_i915_gem_create_ext_protected_content.
> + */
> +#define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0
> +#define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1
> + __u64 extensions;
> +};
> +
> +#define DRM_I915_QUERY_VMA_INFO 5
> +
> +/**
> + * struct __drm_i915_query_vma_info
> + *
> + * Given a vm and GTT address, lookup the corresponding vma, returning its set
> + * of attributes.
> + *
> + * .. code-block:: C
> + *
> + * struct drm_i915_query_vma_info info = {};
> + * struct drm_i915_query_item item = {
> + * .data_ptr = (uintptr_t)&info,
> + * .query_id = DRM_I915_QUERY_VMA_INFO,
> + * };
> + * struct drm_i915_query query = {
> + * .num_items = 1,
> + * .items_ptr = (uintptr_t)&item,
> + * };
> + * int err;
> + *
> + * // Unlike some other types of queries, there is no need to first query
> + * // the size of the data_ptr blob here, since we already know ahead of
> + * // time how big this needs to be.
> + * item.length = sizeof(info);
> + *
> + * // Next we fill in the vm_id and ppGTT address of the vma we wish
> + * // to query, before then firing off the query.
> + * info.vm_id = vm_id;
> + * info.offset = gtt_address;
> + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
> + * if (err || item.length < 0) ...
> + *
> + * // If all went well we can now inspect the returned attributes.
> + * if (info.attributes & DRM_I915_QUERY_VMA_INFO_CPU_VISIBLE) ...
> + */
> +struct __drm_i915_query_vma_info {
> + /**
> + * @vm_id: The given vm id that contains the vma. The id is the value
> + * returned by the DRM_I915_GEM_VM_CREATE. See struct
> + * drm_i915_gem_vm_control.vm_id.
> + */
> + __u32 vm_id;
> + /** @pad: MBZ. */
> + __u32 pad;
> + /**
> + * @offset: The corresponding ppGTT address of the vma which the kernel
> + * will use to perform the lookup.
> + */
> + __u64 offset;
> + /**
> + * @attributes: The returned attributes for the given vma.
> + *
> + * Possible values:
> + *
> + * DRM_I915_QUERY_VMA_INFO_CPU_VISIBLE - Set if the pages backing the
> + * vma are currently CPU accessible. If this is not set then the vma is
> + * currently backed by I915_MEMORY_CLASS_DEVICE memory, which the CPU
> + * cannot directly access(this is only possible on discrete devices with
> + * a small BAR). Attempting to MMAP and fault such an object will
> + * require the kernel first synchronising any GPU work tied to the
> + * object, before then migrating the pages, either to the CPU accessible
> + * part of I915_MEMORY_CLASS_DEVICE, or I915_MEMORY_CLASS_SYSTEM, if the
> + * placements permit it. See I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS.
> + *
> + * Note that this is inherently racy.
> + */
> +#define DRM_I915_QUERY_VMA_INFO_CPU_VISIBLE (1<<0)
> + __u64 attributes;
> + /** @rsvd: MBZ */
> + __u32 rsvd[4];
> +};
> diff --git a/Documentation/gpu/rfc/i915_small_bar.rst b/Documentation/gpu/rfc/i915_small_bar.rst
> new file mode 100644
> index 000000000000..fea92d3d69ab
> --- /dev/null
> +++ b/Documentation/gpu/rfc/i915_small_bar.rst
> @@ -0,0 +1,40 @@
> +==========================
> +I915 Small BAR RFC Section
> +==========================
> +Starting from DG2 we will have resizable BAR support for device local-memory,
> +but in some cases the final BAR size might still be smaller than the total
> +local-memory size. In such cases only part of local-memory will be CPU
> +accessible, while the remainder is only accessible via the GPU.
> +
> +I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS flag
> +----------------------------------------------
> +New gem_create_ext flag to tell the kernel that a BO will require CPU access.
> +The becomes important when placing an object in LMEM, where underneath the
> +device has a small BAR, meaning only part of it is CPU accessible. Without this
> +flag the kernel will assume that CPU access is not required, and prioritize
> +using the non-CPU visible portion of LMEM(if present on the device).
> +
> +Related to this, we now also reject any objects marked with
> +EXEC_OBJECT_CAPTURE, which are also not tagged with NEEDS_CPU_ACCESS. This only
> +impacts DG2+.
> +
> +XXX: One open here is whether we should extend the memory region query to return
> +the CPU visible size of the region. For now the IGTs just use debugfs to query
> +the size. However, if userspace sees a real need for this then extending the
> +region query would be a lot nicer.
I guess UMD folks need to comment on this. Although I think since there
might be a number of
clients utilizing the mappable part, and a number of buffers pinned in
there, I figure this might be of limited value outside of tests without
some kind of cgroups support.
Otherwise
Acked-by: Thomas Hellström <thomas.hellstrom at linux.intel.com>
> +
> +.. kernel-doc:: Documentation/gpu/rfc/i915_small_bar.h
> + :functions: __drm_i915_gem_create_ext
> +
> +DRM_I915_QUERY_VMA_INFO query
> +-----------------------------
> +Query the attributes of some vma. Given a vm and GTT offset, find the
> +respective vma, and return its set of attrubutes. For now we only support
> +DRM_I915_QUERY_VMA_INFO_CPU_VISIBLE, which is set if the object/vma is
> +currently placed in memory that is accessible by the CPU. This should always be
> +set on devices where the CPU visible size of LMEM matches the probed size. If
> +this is not set then CPU faulting the object will first require migrating the
> +pages.
> +
> +.. kernel-doc:: Documentation/gpu/rfc/i915_small_bar.h
> + :functions: __drm_i915_query_vma_info
> diff --git a/Documentation/gpu/rfc/index.rst b/Documentation/gpu/rfc/index.rst
> index 018a8bf317a6..5b8495bdc1fd 100644
> --- a/Documentation/gpu/rfc/index.rst
> +++ b/Documentation/gpu/rfc/index.rst
> @@ -19,3 +19,7 @@ host such documentation:
> .. toctree::
>
> i915_scheduler.rst
> +
> +.. toctree::
> +
> + i915_small_bar.rst
More information about the mesa-dev
mailing list