[Mesa-stable] [PATCH v2] nouveau/video: make sure that firmware is present when checking caps
Ilia Mirkin
imirkin at alum.mit.edu
Sat Feb 8 12:22:46 PST 2014
Apparently some players are ill-prepared for us claiming that a decoder
exists only to have creating it fail, and express this poor preparation
with crashes (e.g. flash). Check that firmware is there to increase the
chances of there being a high correlation between reported capabilities
and ability to create a decoder.
Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu>
Cc: 10.0 10.1 <mesa-stable at lists.freedesktop.org>
Tested-by: Emil Velikov <emil.l.velikov at gmail.com>
---
Have to create a new channel on kepler, otherwise it doesn't work... Emil, I'm
keeping your tested-by since you tested the nv84_video bits which haven't
changed.
src/gallium/drivers/nouveau/nouveau_screen.h | 5 ++
src/gallium/drivers/nouveau/nouveau_vp3_video.c | 78 ++++++++++++++++++++++++-
src/gallium/drivers/nouveau/nv50/nv84_video.c | 68 ++++++++++++++++++++-
3 files changed, 147 insertions(+), 4 deletions(-)
diff --git a/src/gallium/drivers/nouveau/nouveau_screen.h b/src/gallium/drivers/nouveau/nouveau_screen.h
index 7f15d10..51e24fa 100644
--- a/src/gallium/drivers/nouveau/nouveau_screen.h
+++ b/src/gallium/drivers/nouveau/nouveau_screen.h
@@ -49,6 +49,11 @@ struct nouveau_screen {
boolean hint_buf_keep_sysmem_copy;
+ struct {
+ unsigned profiles_checked;
+ unsigned profiles_present;
+ } firmware_info;
+
#ifdef NOUVEAU_ENABLE_DRIVER_STATISTICS
union {
uint64_t v[29];
diff --git a/src/gallium/drivers/nouveau/nouveau_vp3_video.c b/src/gallium/drivers/nouveau/nouveau_vp3_video.c
index ff00b37..11cf729 100644
--- a/src/gallium/drivers/nouveau/nouveau_vp3_video.c
+++ b/src/gallium/drivers/nouveau/nouveau_vp3_video.c
@@ -21,6 +21,7 @@
*/
#include <sys/mman.h>
+#include <sys/stat.h>
#include <stdio.h>
#include <fcntl.h>
@@ -350,6 +351,77 @@ nouveau_vp3_load_firmware(struct nouveau_vp3_decoder *dec,
return 0;
}
+static int
+firmware_present(struct pipe_screen *pscreen, enum pipe_video_profile profile)
+{
+ struct nouveau_screen *screen = nouveau_screen(pscreen);
+ int chipset = screen->device->chipset;
+ int vp3 = chipset < 0xa3 || chipset == 0xaa || chipset == 0xac;
+ int vp5 = chipset >= 0xd0;
+ int ret;
+
+ /* For all chipsets, try to create a BSP objects. Assume that if firmware
+ * is present for it, firmware is also present for VP/PPP */
+ if (!(screen->firmware_info.profiles_checked & 1)) {
+ struct nouveau_object *channel = NULL, *bsp = NULL;
+ struct nv04_fifo nv04_data = {.vram = 0xbeef0201, .gart = 0xbeef0202};
+ struct nvc0_fifo nvc0_args = {};
+ struct nve0_fifo nve0_args = {.engine = NVE0_FIFO_ENGINE_BSP};
+ void *data = NULL;
+ int size, oclass;
+ if (chipset < 0xc0)
+ oclass = 0x85b1;
+ else if (vp5)
+ oclass = 0x95b1;
+ else
+ oclass = 0x90b1;
+
+ if (chipset < 0xc0) {
+ data = &nv04_data;
+ size = sizeof(nv04_data);
+ } else if (chipset < 0xe0) {
+ data = &nvc0_args;
+ size = sizeof(nvc0_args);
+ } else {
+ data = &nve0_args;
+ size = sizeof(nve0_args);
+ }
+
+ /* kepler must have its own channel, so just do this for everyone */
+ nouveau_object_new(&screen->device->object, 0,
+ NOUVEAU_FIFO_CHANNEL_CLASS,
+ data, size, &channel);
+
+ if (channel) {
+ nouveau_object_new(channel, 0, oclass, NULL, 0, &bsp);
+ if (bsp)
+ screen->firmware_info.profiles_present |= 1;
+ nouveau_object_del(&bsp);
+ nouveau_object_del(&channel);
+ }
+ screen->firmware_info.profiles_checked |= 1;
+ }
+
+ if (!(screen->firmware_info.profiles_present & 1))
+ return 0;
+
+ /* For vp3/vp4 chipsets, make sure that the relevant firmware is present */
+ if (!vp5 && !(screen->firmware_info.profiles_checked & (1 << profile))) {
+ char path[PATH_MAX];
+ struct stat s;
+ if (vp3)
+ vp3_getpath(profile, path);
+ else
+ vp4_getpath(profile, path);
+ ret = stat(path, &s);
+ if (!ret && s.st_size > 1000)
+ screen->firmware_info.profiles_present |= (1 << profile);
+ screen->firmware_info.profiles_checked |= (1 << profile);
+ }
+
+ return vp5 || (screen->firmware_info.profiles_present & (1 << profile));
+}
+
int
nouveau_vp3_screen_get_video_param(struct pipe_screen *pscreen,
enum pipe_video_profile profile,
@@ -363,8 +435,10 @@ nouveau_vp3_screen_get_video_param(struct pipe_screen *pscreen,
switch (param) {
case PIPE_VIDEO_CAP_SUPPORTED:
/* VP3 does not support MPEG4, VP4+ do. */
- return profile >= PIPE_VIDEO_PROFILE_MPEG1 && (
- !vp3 || codec != PIPE_VIDEO_FORMAT_MPEG4);
+ return entrypoint == PIPE_VIDEO_ENTRYPOINT_BITSTREAM &&
+ profile >= PIPE_VIDEO_PROFILE_MPEG1 &&
+ (!vp3 || codec != PIPE_VIDEO_FORMAT_MPEG4) &&
+ firmware_present(pscreen, profile);
case PIPE_VIDEO_CAP_NPOT_TEXTURES:
return 1;
case PIPE_VIDEO_CAP_MAX_WIDTH:
diff --git a/src/gallium/drivers/nouveau/nv50/nv84_video.c b/src/gallium/drivers/nouveau/nv50/nv84_video.c
index 3fee6d9..a39f572 100644
--- a/src/gallium/drivers/nouveau/nv50/nv84_video.c
+++ b/src/gallium/drivers/nouveau/nv50/nv84_video.c
@@ -741,16 +741,80 @@ error:
return NULL;
}
+#define FIRMWARE_BSP_KERN 0x01
+#define FIRMWARE_VP_KERN 0x02
+#define FIRMWARE_BSP_H264 0x04
+#define FIRMWARE_VP_MPEG2 0x08
+#define FIRMWARE_VP_H264_1 0x10
+#define FIRMWARE_VP_H264_2 0x20
+#define FIRMWARE_PRESENT(val, fw) (val & FIRMWARE_ ## fw)
+
+static int
+firmware_present(struct pipe_screen *pscreen, enum pipe_video_format codec)
+{
+ struct nouveau_screen *screen = nouveau_screen(pscreen);
+ struct nouveau_object *obj = NULL;
+ struct stat s;
+ int checked = screen->firmware_info.profiles_checked;
+ int present, ret;
+
+ if (!FIRMWARE_PRESENT(checked, VP_KERN)) {
+ nouveau_object_new(screen->channel, 0, 0x7476, NULL, 0, &obj);
+ if (obj)
+ screen->firmware_info.profiles_present |= FIRMWARE_VP_KERN;
+ nouveau_object_del(&obj);
+ screen->firmware_info.profiles_checked |= FIRMWARE_VP_KERN;
+ }
+
+ if (codec == PIPE_VIDEO_FORMAT_MPEG4_AVC) {
+ if (!FIRMWARE_PRESENT(checked, BSP_KERN)) {
+ nouveau_object_new(screen->channel, 0, 0x74b0, NULL, 0, &obj);
+ if (obj)
+ screen->firmware_info.profiles_present |= FIRMWARE_BSP_KERN;
+ nouveau_object_del(&obj);
+ screen->firmware_info.profiles_checked |= FIRMWARE_BSP_KERN;
+ }
+
+ if (!FIRMWARE_PRESENT(checked, VP_H264_1)) {
+ ret = stat("/lib/firmware/nouveau/nv84_vp-h264-1", &s);
+ if (!ret && s.st_size > 1000)
+ screen->firmware_info.profiles_present |= FIRMWARE_VP_H264_1;
+ screen->firmware_info.profiles_checked |= FIRMWARE_VP_H264_1;
+ }
+
+ /* should probably check the others, but assume that 1 means all */
+
+ present = screen->firmware_info.profiles_present;
+ return FIRMWARE_PRESENT(present, VP_KERN) &&
+ FIRMWARE_PRESENT(present, BSP_KERN) &&
+ FIRMWARE_PRESENT(present, VP_H264_1);
+ } else {
+ if (!FIRMWARE_PRESENT(checked, VP_MPEG2)) {
+ ret = stat("/lib/firmware/nouveau/nv84_vp-mpeg12", &s);
+ if (!ret && s.st_size > 1000)
+ screen->firmware_info.profiles_present |= FIRMWARE_VP_MPEG2;
+ screen->firmware_info.profiles_checked |= FIRMWARE_VP_MPEG2;
+ }
+ present = screen->firmware_info.profiles_present;
+ return FIRMWARE_PRESENT(present, VP_KERN) &&
+ FIRMWARE_PRESENT(present, VP_MPEG2);
+ }
+}
+
int
nv84_screen_get_video_param(struct pipe_screen *pscreen,
enum pipe_video_profile profile,
enum pipe_video_entrypoint entrypoint,
enum pipe_video_cap param)
{
+ enum pipe_video_format codec;
+
switch (param) {
case PIPE_VIDEO_CAP_SUPPORTED:
- return u_reduce_video_profile(profile) == PIPE_VIDEO_FORMAT_MPEG4_AVC ||
- u_reduce_video_profile(profile) == PIPE_VIDEO_FORMAT_MPEG12;
+ codec = u_reduce_video_profile(profile);
+ return (codec == PIPE_VIDEO_FORMAT_MPEG4_AVC ||
+ codec == PIPE_VIDEO_FORMAT_MPEG12) &&
+ firmware_present(pscreen, codec);
case PIPE_VIDEO_CAP_NPOT_TEXTURES:
return 1;
case PIPE_VIDEO_CAP_MAX_WIDTH:
--
1.8.3.2
More information about the mesa-stable
mailing list