[Mesa-stable] [PATCH] i965: Rework Sandy Bridge HiZ and stencil layouts
Jason Ekstrand
jason at jlekstrand.net
Mon May 29 19:21:09 UTC 2017
+chad
On Mon, May 29, 2017 at 12:09 PM, Jason Ekstrand <jason at jlekstrand.net>
wrote:
> Sandy Bridge does not technically support mipmapped depth/stencil. In
> order to work around this, we allocate what are effectively completely
> separate images for each miplevel, ensure that they are page-aligned,
> and manually offset to them. Prior to layered rendering, this was a
> simple matter of setting a large enough halign/valign.
>
> With the advent of layered rendering, however, things got more
> complicated. Now, things weren't as simple as just handing a surface
> off to the hardware. Any miplevel of a normally mipmapped surface can
> be considered as just an array surface given the right qpitch. However,
> the hardware gives us no capability to specify qpitch so this won't
> work. Instead, the chosen solution was to use a new "all slices at each
> LOD" layout which laid things out as a mipmap of arrays rather than an
> array of mipmaps. This way you can easily offset to any of the
> miplevels and each is a valid array.
>
> Unfortunately, the "all slices at each lod" concept missed one
> fundamental thing about SNB HiZ and stencil hardware: It doesn't just
> always act as if you're always working with a non-mipmapped surface, it
> acts as if you're always working on a non-mipmapped surface of the same
> size as LOD0. In other words, even though it may only write the
> upper-left corner of each array slice, the qpitch for the array is for a
> surface the size of LOD0 of the depth surface. This mistake causes us
> to under-allocate HiZ and stencil in some cases and also to accidentally
> allow different miplevels to overlap. Sadly, piglit test coverage
> didn't quite catch this until I started making changes to the resolve
> code that caused additional HiZ resolves in certain tests.
>
> This commit switches Sandy Bridge HiZ and stencil over to a new scheme
> that lays out the non-zero miplevels horizontally below LOD0. This way
> they can all have the same qpitch without interfering with each other.
> Technically, the miplevels still overlap, but things are spaced out
> enough that each page is only in the "written area" of one LOD. Hopefully,
> this will get rid of at least some of the random SNB hangs.
>
> Cc: "17.0 17.1" <mesa-stable at lists.freedesktop.org>
> Cc: Topi Pohjolainen <topi.pohjolainen at intel.com>
> Cc: Nanley Chery <nanley.g.chery at intel.com>
> Cc: Jordan Justen <jordan.l.justen at intel.com>
> Cc: Kenneth Graunke <kenneth at whitecape.org>
>
> ---
> The series I sent out on Friday suffered from a GPU hang or two on Sandy
> Bridge. It turns out that those hangs were caused by the hardware HiZ
> resolving part of my batch buffer due to this under-allocation.
>
> Topi, I'm sorry but this will likely make hash of your earlier patch
> series. Sadly, I don't think there's really anything else we can do. :-(
> Also, given how tricky this is to get right, I concede that we may want to
> add an ISL_DIM_LAYOUT_GEN6_HIZ_STENCIL layout to ISL. We could still do
> it
> with the "array of surfaces" approach but I think these sorts of
> calculations are best done in with the other surface calculation code. I
> can help draft it if you'd like.
>
> src/mesa/drivers/dri/i965/brw_blorp.c | 11 ++-
> src/mesa/drivers/dri/i965/brw_tex_layout.c | 100
> ++++++++++++++++++++++----
> src/mesa/drivers/dri/i965/gen6_depth_state.c | 4 +-
> src/mesa/drivers/dri/i965/intel_mipmap_tree.c | 11 +--
> src/mesa/drivers/dri/i965/intel_mipmap_tree.h | 37 +++++++++-
> 5 files changed, 134 insertions(+), 29 deletions(-)
>
> diff --git a/src/mesa/drivers/dri/i965/brw_blorp.c
> b/src/mesa/drivers/dri/i965/brw_blorp.c
> index 6e860f0..cb9933b 100644
> --- a/src/mesa/drivers/dri/i965/brw_blorp.c
> +++ b/src/mesa/drivers/dri/i965/brw_blorp.c
> @@ -123,7 +123,7 @@ apply_gen6_stencil_hiz_offset(struct isl_surf *surf,
> uint32_t lod,
> uint32_t *offset)
> {
> - assert(mt->array_layout == ALL_SLICES_AT_EACH_LOD);
> + assert(mt->array_layout == GEN6_HIZ_STENCIL);
>
> if (mt->format == MESA_FORMAT_S_UINT8) {
> /* Note: we can't compute the stencil offset using
> @@ -183,12 +183,12 @@ blorp_surf_for_miptree(struct brw_context *brw,
> };
>
> if (brw->gen == 6 && mt->format == MESA_FORMAT_S_UINT8 &&
> - mt->array_layout == ALL_SLICES_AT_EACH_LOD) {
> - /* Sandy bridge stencil and HiZ use this ALL_SLICES_AT_EACH_LOD
> hack in
> + mt->array_layout == GEN6_HIZ_STENCIL) {
> + /* Sandy bridge stencil and HiZ use this GEN6_HIZ_STENCIL hack in
> * order to allow for layered rendering. The hack makes each LOD
> of the
> * stencil or HiZ buffer a single tightly packed array surface at
> some
> * offset into the surface. Since ISL doesn't know how to deal
> with the
> - * crazy ALL_SLICES_AT_EACH_LOD layout and since we have to do a
> manual
> + * crazy GEN6_HIZ_STENCIL layout and since we have to do a manual
> * offset of it anyway, we might as well do the offset here and
> keep the
> * hacks inside the i965 driver.
> *
> @@ -241,8 +241,7 @@ blorp_surf_for_miptree(struct brw_context *brw,
>
> struct intel_mipmap_tree *hiz_mt = mt->hiz_buf->mt;
> if (hiz_mt) {
> - assert(brw->gen == 6 &&
> - hiz_mt->array_layout == ALL_SLICES_AT_EACH_LOD);
> + assert(brw->gen == 6 && hiz_mt->array_layout ==
> GEN6_HIZ_STENCIL);
>
> /* gen6 requires the HiZ buffer to be manually offset to the
> * right location. We could fixup the surf but it doesn't
> diff --git a/src/mesa/drivers/dri/i965/brw_tex_layout.c
> b/src/mesa/drivers/dri/i965/brw_tex_layout.c
> index bfa8afa..30e6233 100644
> --- a/src/mesa/drivers/dri/i965/brw_tex_layout.c
> +++ b/src/mesa/drivers/dri/i965/brw_tex_layout.c
> @@ -216,6 +216,8 @@ brw_miptree_layout_2d(struct intel_mipmap_tree *mt)
> mt->total_height = MAX2(mt->total_height, y + img_height);
>
> /* Layout_below: step right after second mipmap.
> + *
> + * For Sandy Bridge HiZ and stencil, we always step down.
> */
> if (level == mt->first_level + 1) {
> x += ALIGN_NPOT(width, mt->halign) / bw;
> @@ -231,6 +233,67 @@ brw_miptree_layout_2d(struct intel_mipmap_tree *mt)
> }
> }
>
> +static void
> +brw_miptree_layout_gen6_hiz_stencil(struct intel_mipmap_tree *mt)
> +{
> + unsigned x = 0;
> + unsigned y = 0;
> + unsigned width = mt->physical_width0;
> + unsigned height = mt->physical_height0;
> + /* Number of layers of array texture. */
> + unsigned depth = mt->physical_depth0;
> + unsigned tile_width, tile_height, bw, bh;
> +
> + if (mt->format == MESA_FORMAT_S_UINT8) {
> + bw = bh = 1;
> + /* W-tiled */
> + tile_width = 64;
> + tile_height = 64;
> + } else {
> + assert(_mesa_get_format_base_format(mt->format) ==
> GL_DEPTH_COMPONENT ||
> + _mesa_get_format_base_format(mt->format) ==
> GL_DEPTH_STENCIL);
> + /* Each 128-bit HiZ block corresponds to a region of of 8x4 depth
> + * samples. Each cache line in the Y-Tiled HiZ image contains 2x2
> HiZ
> + * blocks. Therefore, each Y-tiled cache line corresponds to an
> 16x8
> + * region in the depth surface. Since we're representing it as
> + * RGBA_FLOAT32, the miptree calculations will think that each cache
> + * line is 1x4 pixels. Therefore, we need a scale-down factor of
> 16x2
> + * and a vertical alignment of 2.
> + */
> + mt->cpp = 16;
> + bw = 16;
> + bh = 2;
> + /* Y-tiled */
> + tile_width = 128 / mt->cpp;
> + tile_height = 32;
> + }
> +
> + mt->total_width = 0;
> + mt->total_height = 0;
> +
> + for (unsigned level = mt->first_level; level <= mt->last_level;
> level++) {
> + intel_miptree_set_level_info(mt, level, x, y, depth);
> +
> + const unsigned img_width = ALIGN(DIV_ROUND_UP(width, bw),
> mt->halign);
> + const unsigned img_height =
> + ALIGN(DIV_ROUND_UP(height, bh), mt->valign) * depth;
> +
> + mt->total_width = MAX2(mt->total_width, x + img_width);
> + mt->total_height = MAX2(mt->total_height, y + img_height);
> +
> + if (level == mt->first_level) {
> + y += ALIGN(img_height, tile_height);
> + } else {
> + x += ALIGN(img_width, tile_width);
> + }
> +
> + /* We only minify the width. We want qpitch to match for all
> miplevels
> + * because the hardware doesn't know we aren't on LOD0.
> + */
> + width = minify(width, 1);
> + }
> +}
> +
> unsigned
> brw_miptree_get_horizontal_slice_pitch(const struct brw_context *brw,
> const struct intel_mipmap_tree *mt,
> @@ -249,6 +312,8 @@ brw_miptree_get_vertical_slice_pitch(const struct
> brw_context *brw,
> const struct intel_mipmap_tree *mt,
> unsigned level)
> {
> + assert(mt->array_layout != GEN6_HIZ_STENCIL || brw->gen == 6);
> +
> if (brw->gen >= 9) {
> /* ALL_SLICES_AT_EACH_LOD isn't supported on Gen8+ but this code
> will
> * effectively end up with a packed qpitch anyway whenever
> @@ -281,6 +346,15 @@ brw_miptree_get_vertical_slice_pitch(const struct
> brw_context *brw,
> mt->array_layout == ALL_SLICES_AT_EACH_LOD) {
> return ALIGN_NPOT(minify(mt->physical_height0, level), mt->valign);
>
> + } else if (mt->array_layout == GEN6_HIZ_STENCIL) {
> + /* For HiZ and stencil on Sandy Bridge, we don't minify the height.
> */
> + if (mt->format == MESA_FORMAT_S_UINT8) {
> + return ALIGN(mt->physical_height0, mt->valign);
> + } else {
> + /* HiZ has a vertical scale factor of 2. */
> + return ALIGN(DIV_ROUND_UP(mt->physical_height0, 2), mt->halign);
> + }
> +
> } else {
> const unsigned h0 = ALIGN_NPOT(mt->physical_height0, mt->valign);
> const unsigned h1 = ALIGN_NPOT(minify(mt->physical_height0, 1),
> mt->valign);
> @@ -333,6 +407,8 @@ brw_miptree_layout_texture_array(struct brw_context
> *brw,
>
> if (layout_1d)
> gen9_miptree_layout_1d(mt);
> + else if (mt->array_layout == GEN6_HIZ_STENCIL)
> + brw_miptree_layout_gen6_hiz_stencil(mt);
> else
> brw_miptree_layout_2d(mt);
>
> @@ -556,6 +632,8 @@ intel_miptree_set_total_width_height(struct
> brw_context *brw,
> case INTEL_MSAA_LAYOUT_IMS:
> if (gen9_use_linear_1d_layout(brw, mt))
> gen9_miptree_layout_1d(mt);
> + else if (mt->array_layout == GEN6_HIZ_STENCIL)
> + brw_miptree_layout_gen6_hiz_stencil(mt);
> else
> brw_miptree_layout_2d(mt);
> break;
> @@ -579,15 +657,9 @@ intel_miptree_set_alignment(struct brw_context *brw,
> * - Ironlake and Sandybridge PRMs: Volume 1, Part 1, Section 7.18.3.4
> * - BSpec (for Ivybridge and slight variations in separate stencil)
> */
> - bool gen6_hiz_or_stencil = false;
>
> - if (brw->gen == 6 && mt->array_layout == ALL_SLICES_AT_EACH_LOD) {
> - const GLenum base_format = _mesa_get_format_base_format(
> mt->format);
> - gen6_hiz_or_stencil = _mesa_is_depth_or_stencil_
> format(base_format);
> - }
> -
> - if (gen6_hiz_or_stencil) {
> - /* On gen6, we use ALL_SLICES_AT_EACH_LOD for stencil/hiz because
> the
> + if (mt->array_layout == GEN6_HIZ_STENCIL) {
> + /* On gen6, we use GEN6_HIZ_STENCIL for stencil/hiz because the
> * hardware doesn't support multiple mip levels on stencil/hiz.
> *
> * PRM Vol 2, Part 1, 7.5.3 Hierarchical Depth Buffer:
> @@ -600,15 +672,13 @@ intel_miptree_set_alignment(struct brw_context *brw,
> /* Stencil uses W tiling, so we force W tiling alignment for the
> * ALL_SLICES_AT_EACH_LOD miptree layout.
> */
> - mt->halign = 64;
> - mt->valign = 64;
> + mt->halign = 4;
> + mt->valign = 2;
> assert((layout_flags & MIPTREE_LAYOUT_FORCE_HALIGN16) == 0);
> } else {
> - /* Depth uses Y tiling, so we force need Y tiling alignment for
> the
> - * ALL_SLICES_AT_EACH_LOD miptree layout.
> - */
> - mt->halign = 128 / mt->cpp;
> - mt->valign = 32;
> + /* See intel_hiz_miptree_buf_create() */
> + mt->halign = 1;
> + mt->valign = 2;
> }
> } else if (mt->compressed) {
> /* The hardware alignment requirements for compressed textures
> diff --git a/src/mesa/drivers/dri/i965/gen6_depth_state.c
> b/src/mesa/drivers/dri/i965/gen6_depth_state.c
> index ae4f681..20992d5 100644
> --- a/src/mesa/drivers/dri/i965/gen6_depth_state.c
> +++ b/src/mesa/drivers/dri/i965/gen6_depth_state.c
> @@ -164,7 +164,7 @@ gen6_emit_depth_stencil_hiz(struct brw_context *brw,
> struct intel_mipmap_tree *hiz_mt = depth_mt->hiz_buf->mt;
> uint32_t offset = 0;
>
> - if (hiz_mt->array_layout == ALL_SLICES_AT_EACH_LOD) {
> + if (hiz_mt->array_layout == GEN6_HIZ_STENCIL) {
> offset = intel_miptree_get_aligned_offset(
> hiz_mt,
> hiz_mt->level[lod].level_x,
> @@ -190,7 +190,7 @@ gen6_emit_depth_stencil_hiz(struct brw_context *brw,
> if (separate_stencil) {
> uint32_t offset = 0;
>
> - if (stencil_mt->array_layout == ALL_SLICES_AT_EACH_LOD) {
> + if (stencil_mt->array_layout == GEN6_HIZ_STENCIL) {
> assert(stencil_mt->format == MESA_FORMAT_S_UINT8);
>
> /* Note: we can't compute the stencil offset using
> diff --git a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> index e334951..9f9e68a 100644
> --- a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> +++ b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> @@ -452,7 +452,7 @@ intel_miptree_create_layout(struct brw_context *brw,
> intel_miptree_wants_hiz_buffer(brw, mt)))) {
> uint32_t stencil_flags = MIPTREE_LAYOUT_ACCELERATED_UPLOAD;
> if (brw->gen == 6) {
> - stencil_flags |= MIPTREE_LAYOUT_FORCE_ALL_SLICE_AT_LOD |
> + stencil_flags |= MIPTREE_LAYOUT_GEN6_HIZ_STENCIL |
> MIPTREE_LAYOUT_TILING_ANY;
> }
>
> @@ -485,8 +485,8 @@ intel_miptree_create_layout(struct brw_context *brw,
> }
> }
>
> - if (layout_flags & MIPTREE_LAYOUT_FORCE_ALL_SLICE_AT_LOD)
> - mt->array_layout = ALL_SLICES_AT_EACH_LOD;
> + if (layout_flags & MIPTREE_LAYOUT_GEN6_HIZ_STENCIL)
> + mt->array_layout = GEN6_HIZ_STENCIL;
>
> /*
> * Obey HALIGN_16 constraints for Gen8 and Gen9 buffers which are
> @@ -1830,7 +1830,7 @@ intel_hiz_miptree_buf_create(struct brw_context
> *brw,
> uint32_t layout_flags = MIPTREE_LAYOUT_ACCELERATED_UPLOAD;
>
> if (brw->gen == 6)
> - layout_flags |= MIPTREE_LAYOUT_FORCE_ALL_SLICE_AT_LOD;
> + layout_flags |= MIPTREE_LAYOUT_GEN6_HIZ_STENCIL;
>
> if (!buf)
> return NULL;
> @@ -2770,7 +2770,7 @@ intel_update_r8stencil(struct brw_context *brw,
> const uint32_t r8stencil_flags =
> MIPTREE_LAYOUT_ACCELERATED_UPLOAD | MIPTREE_LAYOUT_TILING_Y |
> MIPTREE_LAYOUT_DISABLE_AUX;
> - assert(brw->gen > 6); /* Handle MIPTREE_LAYOUT_FORCE_ALL_SLICE_AT_LOD
> */
> + assert(brw->gen > 6); /* Handle MIPTREE_LAYOUT_GEN6_HIZ_STENCIL */
> mt->r8stencil_mt = intel_miptree_create(brw,
> src->target,
> MESA_FORMAT_R_UINT8,
> @@ -3670,6 +3670,7 @@ intel_miptree_get_isl_surf(struct brw_context *brw,
> surf->array_pitch_span = ISL_ARRAY_PITCH_SPAN_FULL;
> break;
> case ALL_SLICES_AT_EACH_LOD:
> + case GEN6_HIZ_STENCIL:
> surf->array_pitch_span = ISL_ARRAY_PITCH_SPAN_COMPACT;
> break;
> default:
> diff --git a/src/mesa/drivers/dri/i965/intel_mipmap_tree.h
> b/src/mesa/drivers/dri/i965/intel_mipmap_tree.h
> index aa52f48..e2ec26f 100644
> --- a/src/mesa/drivers/dri/i965/intel_mipmap_tree.h
> +++ b/src/mesa/drivers/dri/i965/intel_mipmap_tree.h
> @@ -250,6 +250,41 @@ enum miptree_array_layout {
> * +---+
> */
> ALL_SLICES_AT_EACH_LOD,
> +
> + /* On Sandy Bridge, HiZ and stencil buffers work the same as on Ivy
> Bridge
> + * except that they don't technically support mipmapping. That does
> not,
> + * however, stop us from doing it. As far as Sandy Bridge hardware is
> + * concerned, HiZ and stencil always operates on a single miplevel 2D
> + * (possibly array) image. The dimensions of that image are NOT
> minified.
> + *
> + * In order to implement HiZ and stencil on Sandy Bridge, we create one
> + * full-sized 2D (possibly array) image for every LOD with every image
> + * aligned to a page boundary. In order to save memory, we pretend
> that
> + * the width of each miplevel is minified and we place LOD1 and above
> below
> + * LOD0 but horizontally adjacent to each other. When considered as
> + * full-sized images, LOD1 and above technically overlap. However,
> since
> + * we only write to part of that image, the hardware will never notice
> the
> + * overlap.
> + *
> + * This layout looks something like this:
> + *
> + * +---------+
> + * | |
> + * | |
> + * +---------+
> + * | |
> + * | |
> + * +---------+
> + *
> + * +----+ +-+ .
> + * | | +-+
> + * +----+
> + *
> + * +----+ +-+ .
> + * | | +-+
> + * +----+
> + */
> + GEN6_HIZ_STENCIL,
> };
>
> enum intel_aux_disable {
> @@ -637,7 +672,7 @@ intel_miptree_alloc_non_msrt_mcs(struct brw_context
> *brw,
>
> enum {
> MIPTREE_LAYOUT_ACCELERATED_UPLOAD = 1 << 0,
> - MIPTREE_LAYOUT_FORCE_ALL_SLICE_AT_LOD = 1 << 1,
> + MIPTREE_LAYOUT_GEN6_HIZ_STENCIL = 1 << 1,
> MIPTREE_LAYOUT_FOR_BO = 1 << 2,
> MIPTREE_LAYOUT_DISABLE_AUX = 1 << 3,
> MIPTREE_LAYOUT_FORCE_HALIGN16 = 1 << 4,
> --
> 2.5.0.400.gff86faf
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/mesa-stable/attachments/20170529/39f89656/attachment-0001.html>
More information about the mesa-stable
mailing list