[Mesa-users] mesa3d with llvm support
Chia-I Wu
olvaffe at gmail.com
Wed Jan 12 03:08:19 PST 2011
On Wed, Jan 12, 2011 at 6:25 PM, Muthukumar S <muthu.smk at gmail.com> wrote:
> Hi All,
> Thanks for your reply,
> I tried as u said by giving the GALLIUM_DRIVER as softpipe and now glxgears
> was working fine.As u said the problem is in gallium driver .
> Now again i tried by setting GALLIUM_DRIVER=llvmpipe ,and i try to run
> "glxgears" from opengles1 sample but its getting crashed inside the gallium
> llvmpipe driver.
> I just given some prints in the "lp_state_vertex.c" which resides inside
> "mesa-master/src/gallium/drivers/llvmpipe"
> Iam not sure why its crashing in the llvm pipe.
> once again iam informing that my intension is to run any of the
> opengl/opengles application with gallium mesa3d with llvm support and check
> the
> performance in linux (fedora 11).
> NOTE : LLVM libraries used to compile gallium mesa 3d
> : clang_llvm-2.7-i686-linux
> Mesa Version : Mesa 7.10.0
> $ ./configure --enable-debug --enable-gles1 --enable-gles2
> --enable-gallium-svga --enable-gallium-i915 --enable-gallium-i965
> --enable-gallium-llvm --disable-glut --with-dri-drivers=
> --disable-gallium-radeon --enable-gles-overlay
> --with-state-trackers=egl,vega
I did a clean build with same configure options. It works here. It
could be some compatibility issue with your LLVM version, but I am not
familiar with the code there. You might want to file a bug report.
I do notice one thing weird in the EGL log below.
> These are my export variables.:
> --------------------------------------------------
> export
> LD_LIBRARY_PATH="/home/muthu/work/game/gallium/mesa-master-llvm-gcc-egl/lib"
> export EGL_LOG_LEVEL="debug"
> export GALLIUM_DRIVER="llvmpipe"
> export
> EGL_DRIVERS_PATH="/home/muthu/work/game/gallium/mesa-master-llvm-gcc-egl/lib/egl/"
>
> Here iam sending the log messages.
> ------------------------------------------------------------
> [muthu at localhost opengles1]$ ./gears_x11
> libEGL debug: EGL search path is /usr/local/lib/egl
When EGL_DRIVERS_PATH is set, it should be prepended to the search
path. Did you have the variable set when running the demo?
> libEGL debug: added /usr/local/lib/egl/egl_gallium.so to module array
> libEGL debug: added /usr/local/lib/egl/egl_glx.so to module array
> libEGL debug: dlopen(/usr/local/lib/egl/egl_gallium.so)
> libEGL info: use X11 for display 0x871f008
> libEGL debug: searching for pipe module i915
> libEGL warning: failed to create DRM screen
> libEGL warning: use software fallback
> libEGL debug: searching for pipe module swrast
> libEGL debug: loaded /usr/local/lib/egl/pipe_swrast.so
> libEGL debug: the best driver is Gallium (score 100)
> EGL_VERSION = 1.4 (Gallium)
> libEGL debug: the value (0x0) of attribute 0x3025 did not meet the criteria
> (0x1)
> libEGL debug: the value (0x0) of attribute 0x3025 did not meet the criteria
> (0x1)
> libEGL debug: the value (0x0) of attribute 0x3025 did not meet the criteria
> (0x1)
> libEGL debug: the value (0x0) of attribute 0x3025 did not meet the criteria
> (0x1)
> libEGL debug: the value (0x0) of attribute 0x3025 did not meet the criteria
> (0x1)
> libEGL debug: the value (0x0) of attribute 0x3025 did not meet the criteria
> (0x1)
> libEGL debug: the value (0x0) of attribute 0x3025 did not meet the criteria
> (0x1)
> ...
> ...
> ...
> libEGL debug: loaded /usr/local/lib/egl/st_GLESv1_CM.so
> [MUTHU][114][llvmpipe_init_vertex_funcs][lp_state_vertex.c]
> [MUTHU][83][llvmpipe_set_vertex_buffers][lp_state_vertex.c]
> [MUTHU][44][llvmpipe_create_vertex_elements_state][lp_state_vertex.c]
> [MUTHU][61][llvmpipe_bind_vertex_elements_state][lp_state_vertex.c]
> [MUTHU][102][llvmpipe_set_index_buffer][lp_state_vertex.c]
> Segmentation fault
> Here iam sending gdb back trace:
> ------------------------------------------------------
> 255 clipped = fpme->current_variant->jit_func_elts(
> &fpme->llvm->jit_context,
> (gdb) s
> Program received signal SIGSEGV, Segmentation fault.
> 0x00200539 in draw_llvm_shader_elts ()
> (gdb) bt
> #0 0x00200539 in draw_llvm_shader_elts ()
> #1 0x0104eae9 in llvm_pipeline_generic () at
> draw_pt_fetch_shade_pipeline_llvm.c:255
> #2 0x0104e88e in llvm_middle_end_run () at
> draw_pt_fetch_shade_pipeline_llvm.c:337
> #3 0x01007c42 in vsplit_flush_cache () at draw_pt_vsplit.c:77
> #4 vsplit_segment_cache_ushort () at draw_pt_vsplit.c:173
> #5 0x01006373 in vsplit_segment_simple_ushort ()
> at
> /home/muthu/work/game/gallium/mesa-master-llvm-gcc-egl/src/gallium/auxiliary/draw/draw_pt_vsplit_tmp.h:182
> #6 vsplit_run_ushort () at draw_pt_vsplit.c:111
> #7 0x01001439 in draw_pt_arrays () at draw_pt.c:113
> #8 0x0100174a in draw_vbo () at draw_pt.c:481
> #9 0x00fd3068 in llvmpipe_draw_vbo () at lp_draw_arrays.c:81
> #10 0x009986d4 in st_draw_vbo () at st_draw.c:732
> #11 0x00995610 in vbo_validated_drawrangeelements () at vbo_exec_array.c:793
> #12 0x0099428e in vbo_exec_DrawElements () at vbo_exec_array.c:947
> #13 0x0804a299 in draw_gear () at gears.c:219
> #14 0x0804a004 in gears_draw () at gears.c:268
> #15 0x0804add3 in next_event () at eglut_x11.c:248
> #16 _eglutNativeEventLoop () at eglut_x11.c:242
> #17 0x08049639 in main () at gears.c:378
> It seems the function "draw_llvm_shader_elts() is getting crashed.
>
> can any one help me to fix out this issue.
> Thanks
> Muthukumar
>
>
> On Tue, Jan 11, 2011 at 9:15 PM, Chia-I Wu <olvaffe at gmail.com> wrote:
>>
>> On Tue, Jan 11, 2011 at 10:00 PM, Muthukumar <muthu.smk at gmail.com> wrote:
>> > Iam working in fc-11 ,and i try to compile and run gallium mesa3d with
>> > llvm
>> > support .But i am getting some error while i try to run the opengl or
>> > opengles
>> > application. Can any one suggest me fix the issue .My intension is to
>> > run any of
>> > the opengl/opengles application with gallium mesa3d with llvm support
>> > and check
>> > the performance in linux (fedora 11).
>> >
>> > Here the configuration option of gallium mesa3d source
>> > ./configure --enable-debug --enable-gles1 --enable-gles2
>> > --enable-gallium-egl --
>> > enable-gallium-llvm --disable-glut --with-dri-drivers=i915
>> > --disable-gallium-
>> > radeon --enable-gles-overlay
>> >
>> >
>> > config.status: executing configs commands
>> >
>> > prefix: /usr/local
>> > exec_prefix: ${prefix}
>> > libdir: ${exec_prefix}/lib
>> > includedir: ${prefix}/include
>> >
>> > OpenGL: yes (ES1: yes ES2: yes)
>> > GLES overlay: yes
>> > OpenVG: no
>> >
>> > Driver: dri
>> > OSMesa: no
>> > DRI drivers: i915
>> > DRI driver dir: ${libdir}/dri
>> > Use XCB: no
>> >
>> > GLU: yes
>> > GLw: yes (Motif: no)
>> > glut: no
>> >
>> > EGL: yes
>> > EGL platforms: x11 drm
>> > EGL drivers: egl_glx egl_gallium
>> > EGL Gallium STs: $(GL_LIB) $(GLESv1_CM_LIB) $(GLESv2_LIB)
>> >
>> > llvm: yes
>> > llvm-config:
>> > /home/muthu/work/clang_llvm-2.7-i686-linux/bin/llvm-
>> > config
>> > llvm-version: 2.7
>> >
>> > Gallium: yes
>> > Gallium dirs: auxiliary drivers state_trackers
>> > Target dirs: egl dri-swrast
>> > Winsys dirs: sw sw/xlib sw/dri i915/sw
>> > Driver dirs: softpipe failover galahad trace rbug identity
>> > llvmpipe
>> > svga i915 i965
>> > Trackers dirs: dri egl
>> >
>> > Shared libs: yes
>> > Static libs: no
>> >
>> > CFLAGS: -g -O2 -Wall -Wmissing-prototypes -std=c99
>> > -ffast-math
>> > -fvisibility=hidden -fno-strict-aliasing -g -fPIC
>> > CXXFLAGS: -g -O2 -Wall -fvisibility=hidden
>> > -fno-strict-aliasing -
>> > g -fPIC
>> > Macros: -D_GNU_SOURCE -DPTHREADS -DDEBUG
>> > -DHAVE_POSIX_MEMALIGN
>> > -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER -DGLX_DIRECT_RENDERING -
>> > DGLX_INDIRECT_RENDERING -DHAVE_ALIAS -DGALLIUM_LLVMPIPE
>> > -D__STDC_CONSTANT_MACROS
>> > -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM
>> >
>> > PYTHON2: python2
>> >
>> > Run 'gmake' to build Mesa
>> >
>> >
>> > and i have downloaded the "demo-master" (test apps) source and i
>> > compiled this
>> > apps with the above compiled libraries.
>> > If i try to run "gears_xll" or any other opengles apps iam getting the
>> > following
>> > error with segmentation fault ,I debug it ,the control is going in to
>> > llvm pipe
>> > and then getting crashed with seg fault. before running the application
>> > i have
>> > set the following environment variables.
>> >
>> > export
>> > LD_LIBRARY_PATH="/home/muthu/work/game/gallium/mesa-master-llvm-gcc-
>> > egl/lib"
>> > export EGL_PLATFORM="dri"
>> There is no need to set EGL_PLATFORM in this case and generally.
>> "dri" is also an invalid value.
>> > export
>> > LIBGL_DRIVERs_PATH="/home/muthu/work/game/gallium/mesa-master-llvm-gcc-
>> > egl/lib/gallium/"
>> Without
>>
>> $ export
>> EGL_DRIVERS_PATH="/home/muthu/work/game/gallium/mesa-master-llvm-gcc-egl/lib/egl/"
>>
>> it is likely that the wrong driver is loaded. You can set
>> EGL_LOG_LEVEL=debug to see which module is dlopen()ed; if you suspect
>> the crash is in llvmpipe, you may set GALLIUM_DRIVER=softpipe to see
>> if it still crashes. Either way, a gdb backtrace is helpful.
>>
>> >
>> >
>> > # ./gears_x11
>> > libEGL warning: failed to create DRM screen
>> > libEGL warning: use software fallback
>> > EGL_VERSION = 1.4 (Gallium)
>> > Segmentation fault
>> > [muthu at localhost opengles1]$ ./gears_x11
>> > libEGL warning: failed to create DRM screen
>> > libEGL warning: use software fallback
>> > EGL_VERSION = 1.4 (Gallium)
>> > Segmentation fault
>> >
>> >
>> > Can any one suggest me fix the above issue .My intension is to run any
>> > of the
>> > opengl/opengles application with gallium mesa3d with llvm support and
>> > check the
>> > performance in linux (fedora 11).
>> >
>> > Thanks in advance.
>> >
>> >
>> > _______________________________________________
>> > mesa-users mailing list
>> > mesa-users at lists.freedesktop.org
>> > http://lists.freedesktop.org/mailman/listinfo/mesa-users
>> >
>>
>>
>>
>> --
>> olv at LunarG.com
>
>
>
> --
> Anbudan
> S.Muthukumar
>
>
--
olv at LunarG.com
More information about the mesa-users
mailing list