[Mesa-users] nvclock vs. sensors

[James]

# nvclock -i 
-- General info --
Card:           nVidia Geforce 8800GT
Architecture:   G92 A2
PCI id:         0x611
GPU clock:      399.600 MHz
Bustype:        PCI-Express

-- Shader info --
Clock: 810.000 MHz
Stream units: 112 (01111111b)
ROP units: 16 (1111b)
-- Memory info --
Amount:         512 MB
Type:           256 bit DDR3
Clock:          499.500 MHz

-- PCI-Express info --
Current Rate:   16X
Maximum rate:   16X

-- Sensor info --
Sensor: Analog Devices ADT7473
Board temperature: 50C
GPU temperature: 62C
Fanspeed: 3781 RPM
Fanspeed mode: auto
PWM duty cycle: 58.8%

-- VideoBios information --
Version: 62.92.12.00.04
Signon message: GeForce 8800 GT VGA BIOS
Performance level 0: gpu 600MHz/shader 1500MHz/memory 1000MHz/1.05V/100%
VID mask: 3
Voltage level 0: 0.95V, VID: 0
Voltage level 1: 1.00V, VID: 1
Voltage level 2: 1.05V, VID: 2
Voltage level 3: 1.10V, VID: 3


# sensors
nouveau-pci-0100
Adapter: PCI adapter
temp1:         +0.0 C  (high = +100.0 C, crit = +110.0 C)


How do I get sensors to display my GPU temperature and fan speed?