[Mesa-users] application runs at slower rate in mesa 9.0.1 compare to mesa 7.8

[s66812 at informatik.htw-dresden.de]

Did you build mesa 7.8 yourself too and can you show us the
configuration of that too?

Did you tried a precompiled version?

Can you explain why your  9.0.1 configuration is how it is?

best regards

Am Wed, 5 Feb 2014 12:46:57 +0800
schrieb "Anil Valmiki (RBEI/ECF3)" <Anil.Valmiki at in.bosch.com>:

> Actually glxinfo was also not working (I am checking on that know)
> Pls refer attached mail.
> 
> Best Regards,
> Anil V
> 
> -----Original Message-----
> From: Brian Paul [mailto:brianp at vmware.com] 
> Sent: Tuesday, February 04, 2014 10:18 PM
> To: Anil Valmiki (RBEI/ECF3); mesa-users at lists.freedesktop.org
> Subject: Re: [Mesa-users] application runs at slower rate in mesa
> 9.0.1 compare to mesa 7.8
> 
> On 02/03/2014 10:00 PM, Anil Valmiki (RBEI/ECF3) wrote:
> > Dear Brian,
> >
> >>> Which driver are you using?
> >        Gallium
> 
> Which gallium driver? :)  The output of glxinfo would be helpful.
> 
> -Brian
> 
> 
> >>> Did you compile yourself?
> >       Yes
> >
> >>> With the same options?
> >
> > DRIDRIVERS = "swrast"
> > EGL_PLATFORMS  = "x11"
> > EGL_PLATFORMS .= ",drm"
> >
> > EXTRA_OECONF += "--enable-gallium
> > --with-gallium-drivers="nouveau,r600,svga,swrast"" EXTRA_OECONF +=
> > "--enable-dri --with-dri-drivers=${DRIDRIVERS}" EXTRA_OECONF +=
> > "--enable-gbm"
> >
> > EXTRA_OECONF += "--enable-gles1 --enable-gles2 --enable-openvg
> > --enable-gallium-egl --enable-gallium-gbm --enable-glx"
> >
> > EXTRA_OECONF += "--enable-egl --with-egl-platforms=${EGL_PLATFORMS}"
> >
> > X11_DEPS = "xf86driproto glproto virtual/libx11 libxext libxxf86vm
> > libxdamage libxfixes" EXTRA_OECONF += "--enable-glx-tls"
> > DEPENDS += "${X11_DEPS}"
> >
> >
> > Previously I am using MESA 7.8
> > Which is having a bug when you scissor a portion to write, it
> > scissors in x mirror position and allowing us to write in x mirror
> > position not in the scissor position . And also mesa 7.8 is old one
> > which didn't support FBO . So I thought of upgrade to mesa 9.0.1
> > where I found that FPS(frame per second ) reduced by 50% while
> > running opengles1.0 demo .
> >
> > Thanks in advance.
> >
> > Best Regards,
> > Anil V
> >
> >
> > -----Original Message-----
> > From: mesa-users-bounces at lists.freedesktop.org
> > [mailto:mesa-users-bounces at lists.freedesktop.org] On Behalf Of
> > Brian Paul Sent: Friday, January 31, 2014 9:30 PM To:
> > mesa-users at lists.freedesktop.org Subject: Re: [Mesa-users]
> > application runs at slower rate in mesa 9.0.1 compare to mesa 7.8
> >
> > On 01/21/2014 04:24 AM, Anil Valmiki (RBEI/ECF3) wrote:
> >> Hi Everyone,
> >> Is there any difference in rendering (like software or hardware) by
> >> default from mesa 7.8 to mesa 9.0.1.
> >> Because when I port to mesa 9.0.1 the application runs slower rate
> >> compare to mesa 7.8.
> >
> > Impossible to say much without knowing more.  Which driver are you
> > using?  Did you compile yourself?  With the same options?  Do you
> > have a test program?
> >
> > -Brian
> >
> >
> > _______________________________________________
> > mesa-users mailing list
> > mesa-users at lists.freedesktop.org
> > https://urldefense.proofpoint.com/v1/url?u=http://lists.freedesktop.org/mailman/listinfo/mesa-users&k=oIvRg1%2BdGAgOoM1BIlLLqw%3D%3D%0A&r=lGQMzzTgII0I7jefp2FHq7WtZ%2BTLs8wadB%2BiIj9xpBY%3D%0A&m=9NFfMcuhfDsCOJKxxwvUFptIvg0BHvi8mXcOJVv18Rk%3D%0A&s=8f230065ccda4b3eac0f616f26708d98364a3b709dccf9638e38fab51cba72e6
> >
>