[Mesa-users] configure: error: libudev-dev or sysfs required for building DRI

[Sam M]

Are there any better instructions on how to setup VMware SVGA3D guest driver for CentOS 6.6? I'm currently using the following instructions at http://www.mesa3d.org/vmware-guest.html
What about this issue?
I'm having another issue with vmwgfx. When I run the command "make" I get the following error "Makefile:126: *** Cannot find a kernel config file. Stop."

> Date: Thu, 5 Mar 2015 10:02:33 -0700
> From: brianp at vmware.com
> To: sam_h00 at hotmail.com; mesa-users at lists.freedesktop.org
> Subject: Re: [Mesa-users] configure: error: libudev-dev or sysfs required for building DRI
> 
> with --disable-dri you'll have no hardware acceleration (software 
> rendering only).
> 
> -Brian
> 
> On 03/05/2015 09:48 AM, Sam M wrote:
> > I solved the issue by removing the 3 from this command --disable-dri3. I
> > was able to compile mesa with no issues.
> >
> > I'm having another issue with vmwgfx. When I run the command "make" I
> > get the following error "Makefile:126: *** Cannot find a kernel config
> > file.  Stop."
> >
> >  > Date: Thu, 5 Mar 2015 09:27:28 -0700
> >  > From: brianp at vmware.com
> >  > To: sam_h00 at hotmail.com; mesa-users at lists.freedesktop.org
> >  > Subject: Re: [Mesa-users] configure: error: libudev-dev or sysfs
> > required for building DRI
> >  >
> >  > OK, it looks like on RHEL 7, /usr/include/libudev.h comes from the
> >  > systemd-devel RPM. So try "sudo yum install systemd-devel".
> >  >
> >  > -Brian
> >  >
> >  >
> >  > On 03/05/2015 09:02 AM, Sam M wrote:
> >  > > libsysfs wasn't installed so I installed it... Got the same error
> > "configure: error: libudev-dev or sysfs required for building DRI"
> >  > >
> >  > > glxinfo
> >  > >
> >  > > OpenGL vendor string: Mesa Project
> >  > > OpenGL renderer string: Software Rasterizer
> >  > > OpenGL version string: 2.1 Mesa 10.1.2
> >  > > OpenGL shading language version string: 1.20
> >  > >
> >  > > > Date: Thu, 5 Mar 2015 08:54:12 -0700
> >  > > > From: brianp at vmware.com
> >  > > > To: sam_h00 at hotmail.com; mesa-users at lists.freedesktop.org
> >  > > > Subject: Re: [Mesa-users] configure: error: libudev-dev or sysfs
> >  > > required for building DRI
> >  > > >
> >  > > > On 03/05/2015 08:35 AM, Sam M wrote:
> >  > > > > I'm trying to install VMware guest GL driver on CentOS 6.5 but with
> >  > > no luck.
> >  > > > >
> >  > > > > Building the Code for Mesa
> >  > > > >
> >  > > > > ./autogen.sh --prefix=/usr --libdir=/usr/lib64
> >  > > > > --with-gallium-drivers=svga --with-dri-drivers= --enable-xa
> >  > > --disable-dri3
> >  > > > >
> >  > > > > I get the following error "configure: error: libudev-dev or sysfs
> >  > > > > required for building DRI"
> >  > > >
> >  > > > Check that libsysfs is installed. Install if with yum if missing.
> >  > > >
> >  > > >
> >  > > >
> >  > > > > Has anyone got VMware SVGA3D guest driver installed on CentOS 6.5
> >  > > or 6.6?
> >  > > > >
> >  > > > > Any help would be much appreciated.
> >  > > >
> >  > > > I haven't tried CentOS, but when I tried installing on RHEL 7 I had a
> >  > > > lot of problems and haven't had time to investigate yet.
> >  > > >
> >  > > > -Brian
> >  > > >
> >  > > >
> >  >
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/mesa-users/attachments/20150305/f05b6a80/attachment-0001.html>