E1750 Reloaded - QMI - STATIC - DHCP - IPv4

[poma]

On 04.08.2014 10:32, Aleksander Morgado wrote:
> On Sun, Aug 3, 2014 at 10:32 PM, poma <pomidorabelisima at gmail.com> wrote:
>> "broadband-bearer-qmi: support IPv6 configuration and use static for IPv4"
>> http://cgit.freedesktop.org/ModemManager/ModemManager/commit/?id=ca0a567
>>
>> MM_BEARER_IP_METHOD_STATIC definitely doesn't work.
>> Despite the provided static IPv4 configuration given by the modem to configure the IP data interface, 'route' is stuck, and 'ping' also shows nothing.
>> Dan, what is the actual reason for the switch from MM_BEARER_IP_METHOD_DHCP to MM_BEARER_IP_METHOD_STATIC?
>> Is MM_BEARER_IP_METHOD_DHCP not working for someone?
> 
> 
> What do you mean 'route' is stuck?

Both man 8 ping & man 8 route
shows nothing continually, must be manually interrupted == stuck. :)
Hey man, ping does not pass!

> 
> Do you have some MM debug logs to check what static IP config was built?
> And I guess checking some wireshark traces on the WWAN interface also
> wouldn't hurt...
> 

Man, I've spent enough time on it already and guess what, MM_BEARER_IP_METHOD_DHCP works perfectly!
Why unnecessarily breaks the valid configuration!?
Earth calling!


poma