E1750 Reloaded - QMI - STATIC - DHCP - IPv4

[Aleksander Morgado]

>  <debug> [296.467180] [mm-bearer-qmi.c:725] connect_context_step(): Getting IPv4 configuration...
>  [/dev/cdc-wdm0] Sent message...
>  <<<<<< RAW:
>  <<<<<<   length = 20
>  <<<<<<   data   = 01:13:00:00:01:18:00:02:00:2D:00:07:00:10:04:00:30:E3:00:00
>  [/dev/cdc-wdm0] Sent message (translated)...
>  <<<<<< QMUX:
>  <<<<<<   length  = 19
>  <<<<<<   flags   = 0x00
>  <<<<<<   service = "wds"
>  <<<<<<   client  = 24
>  <<<<<< QMI:
>  <<<<<<   flags       = "none"
>  <<<<<<   transaction = 2
>  <<<<<<   tlv_length  = 7
>  <<<<<<   message     = "Get Current Settings" (0x002D)
>  <<<<<< TLV:
>  <<<<<<   type       = "Requested Settings" (0x10)
>  <<<<<<   length     = 4
>  <<<<<<   value      = 30:E3:00:00
>  <<<<<<   translated = dns-address, granted-qos, ip-address, gateway-info, mtu, domain-name-list, ip-family
>  [/dev/cdc-wdm0] Received message...
>  >>>>>> RAW:
>  >>>>>>   length = 18
>  >>>>>>   data   = 01:11:00:80:01:FF:04:00:00:22:00:05:00:01:02:00:02:00
>  [/dev/cdc-wdm0] Received message (translated)...
>  >>>>>> QMUX:
>  >>>>>>   length  = 17
>  >>>>>>   flags   = 0x80
>  >>>>>>   service = "wds"
>  >>>>>>   client  = 255
>  >>>>>> QMI:
>  >>>>>>   flags       = "indication"
>  >>>>>>   transaction = 0
>  >>>>>>   tlv_length  = 5
>  >>>>>>   message     = (0x0022)
>  >>>>>> TLV:
>  >>>>>>   type   = 0x01
>  >>>>>>   length = 2
>  >>>>>>   value  = 02:00
>  [/dev/cdc-wdm0] Received message...
>  >>>>>> RAW:
>  >>>>>>   length = 91
>  >>>>>>   data   = 01:5A:00:80:01:18:02:02:00:2D:00:4E:00:02:04:00:00:00:00:00:1E:04:00:4A:3E:93:1F:15:04:00:82:B8:C6:C1:16:04:00:8C:B8:C6:C1:20:04:00:49:3E:93:1F:21:04:00:FC:FF:FF:FF:17:21:00:04:F5:02:00:00:3E:03:00:00:10:00:00:00:80:00:00:00:02:DC:05:00:00:04:07:03:00:00:00:00:03:00:00:00
>  [/dev/cdc-wdm0] Received message (translated)...
>  >>>>>> QMUX:
>  >>>>>>   length  = 90
>  >>>>>>   flags   = 0x80
>  >>>>>>   service = "wds"
>  >>>>>>   client  = 24
>  >>>>>> QMI:
>  >>>>>>   flags       = "response"
>  >>>>>>   transaction = 2
>  >>>>>>   tlv_length  = 78
>  >>>>>>   message     = "Get Current Settings" (0x002D)
>  >>>>>> TLV:
>  >>>>>>   type       = "Result" (0x02)
>  >>>>>>   length     = 4
>  >>>>>>   value      = 00:00:00:00
>  >>>>>>   translated = SUCCESS
>  >>>>>> TLV:
>  >>>>>>   type       = "IPv4 Address" (0x1e)
>  >>>>>>   length     = 4
>  >>>>>>   value      = 4E:38:EA:01
>  >>>>>>   translated = 32127054
>  >>>>>> TLV:
>  >>>>>>   type       = "Primary IPv4 DNS Address" (0x15)
>  >>>>>>   length     = 4
>  >>>>>>   value      = 08:08:08:08
>  >>>>>>   translated = 134744072
>  >>>>>> TLV:
>  >>>>>>   type       = "Secondary IPv4 DNS Address" (0x16)
>  >>>>>>   length     = 4
>  >>>>>>   value      = 04:04:08:08
>  >>>>>>   translated = 134743044
>  >>>>>> TLV:
>  >>>>>>   type       = "IPv4 Gateway Address" (0x20)
>  >>>>>>   length     = 4
>  >>>>>>   value      = 4D:38:EA:01
>  >>>>>>   translated = 32127053
>  >>>>>> TLV:
>  >>>>>>   type       = "IPv4 Gateway Subnet Mask" (0x21)
>  >>>>>>   length     = 4
>  >>>>>>   value      = FC:FF:FF:FF
>  >>>>>>   translated = 4294967292
>  >>>>>> TLV:
>  >>>>>>   type   = 0x17
>  >>>>>>   length = 33
>  >>>>>>   value  = 04:F5:02:00:00:3E:03:00:00:10:00:00:00:80:00:00:00:02:DC:05:00:00:04:07:03:00:00:00:00:03:00:00:00
>  <debug> [296.471217] [mm-bearer-qmi.c:461] get_current_settings_ready():  IP Family: failed (Field 'IP Family' was not found in the message); assuming IPv4
>  <debug> [296.471244] [mm-bearer-qmi.c:467] get_current_settings_ready():  IP Family: IPv4
>  <debug> [296.471265] [mm-bearer-qmi.c:470] get_current_settings_ready():        MTU: failed (Field 'MTU' was not found in the message)
>  <debug> [296.471307] [mm-bearer-qmi.c:291] get_ipv4_config(): QMI IPv4 Settings:
>  <debug> [296.471369] [mm-bearer-qmi.c:300] get_ipv4_config():     Address: 01.234.56.78/30
>  <debug> [296.471394] [mm-bearer-qmi.c:306] get_ipv4_config():     Gateway: 01.234.56.77
>  <debug> [296.471413] [mm-bearer-qmi.c:316] get_ipv4_config():     DNS #1: 8.8.8.8
>  <debug> [296.471708] [mm-bearer-qmi.c:326] get_ipv4_config():     DNS #2: 8.8.4.4
>  <debug> [296.473506] [mm-bearer-qmi.c:492] get_current_settings_ready():    Domains: failed (Field 'Domain Name List' was not found in the message)
>  <debug> [296.474389] [mm-port.c:95] mm_port_set_connected(): (wwan0): port now connected
>  <debug> [296.475147] [mm-base-bearer.c:488] connect_ready(): Connected bearer '/org/freedesktop/ModemManager1/Bearer/0'
>  <info>  [296.475941] [mm-iface-modem.c:1392] __iface_modem_update_state_internal(): Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
>  <info>  [296.478308] [mm-iface-modem-simple.c:602] connection_step(): Simple connect state (8/8): All done


Thanks, those logs were good.

Dan, do you see anything wrong in the IPv4 setup that we get back from
the modem? It does look ok to me.