E1750 Reloaded - QMI - STATIC - DHCP - IPv4

[poma]

On 18.08.2014 16:54, Dan Williams wrote:

> Can you try the dcbw/qmi-always-dhcp branch and see if that also fixes
> the problem?
> 
> Thanks!
> Dan
> 

It works with your branch.

Bearer '/org/freedesktop/ModemManager1/Bearer/0'
  -------------------------
  Status             |   connected: 'yes'
                     |   suspended: 'no'
                     |   interface: 'wwan0'
                     |  IP timeout: '20'
  -------------------------
  Properties         |         apn: 'access.point.name'
                     |     roaming: 'forbidden'
                     |     IP type: 'none'
                     |        user: 'username'
                     |    password: 'password'
                     |      number: 'none'
                     | Rm protocol: 'unknown'
  -------------------------
  IPv4 configuration |   method: 'dhcp'
                     |  address: 'unknown'
                     |   prefix: '0'
                     |  gateway: 'unknown'
                     |      DNS: none
  -------------------------
  IPv6 configuration |   method: 'unknown'


- ip link:
3: wwan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 00:01:02:03:04:05 brd ff:ff:ff:ff:ff:ff
- ip addr:
3: wwan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/ether 00:01:02:03:04:05 brd ff:ff:ff:ff:ff:ff
    inet 01.234.56.179/29 brd 01.234.56.183 scope global dynamic wwan0
       valid_lft 7134sec preferred_lft 7134sec
- ip route:
default via 01.234.56.177 dev wwan0  proto static  metric 1024 
01.234.56.176/29 dev wwan0  proto kernel  scope link  src 01.234.56.179 


poma