How to get IP address

Tony tony.makkiel at daqri.com
Tue Nov 24 09:38:10 PST 2015


Hi,
	I have managed to connect to EE network. But how do I get an IP 
address. I am using mmcli to make the connection. Most of the time it 
fails to make the connection.

--------------------------------------------------------------
mmcli -m 0 --simple-connect="apn=everywhere" --timeout=600
error: couldn't connect the modem: 
'GDBus.Error:org.freedesktop.ModemManager1.Error.MobileEquipment.GprsUnknown: 
Unknown error (256)'
------------------------------------------------------------------------------

Or

------------------------------------------------------------------------------------
mmcli -m 0 --simple-connect="apn=everywhere" --timeout=600
error: couldn't connect the modem: 
'GDBus.Error:org.freedesktop.libmbim.Error.Status.Failure: Failure'
----------------------------------------------------------------------------------


  But when it connects
-----------------------------------------------------------------
mmcli -m 0 --simple-connect="apn=everywhere" --timeout=600
successfully connected the modem

mmcli -m 0

/org/freedesktop/ModemManager1/Modem/0 (device id 
'ca3bb301f9abd2a39125f61329c9616d15d21e0f')
   -------------------------
   Hardware |   manufacturer: 'Generic'
            |          model: 'MBIM [8087:0911]'
            |       revision: 'M27260_V2.3_WW_01.1530.102'
            |      supported: 'gsm-umts, lte'
            |        current: 'gsm-umts, lte'
            |   equipment id: '3564040x0000xxx'
   -------------------------
   System   |         device: 
'/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5'
            |        drivers: 'cdc_mbim, cdc_acm'
            |         plugin: 'Generic'
            |   primary port: 'cdc-wdm0'
            |          ports: 'cdc-wdm0 (mbim), wwan0 (net), ttyACM0 
(at), ttyACM2 (at)'
   -------------------------
   Numbers  |           own : '0044795748xxxx'
   -------------------------
   Status   |           lock: 'none'
            | unlock retries: 'sim-pin2 (3)'
            |          state: 'connected'
            |    power state: 'on'
            |    access tech: 'hsdpa, hsupa'
            | signal quality: '19' (recent)
   -------------------------
   Modes    |      supported: 'allowed: 2g, 3g, 4g; preferred: none'
            |        current: 'allowed: 2g, 3g, 4g; preferred: none'
   -------------------------
   Bands    |      supported: 'unknown'
            |        current: 'unknown'
   -------------------------
   IP       |      supported: 'ipv4, ipv6, ipv4v6'
   -------------------------
   3GPP     |           imei: '3564040x0000xxx'
            |  enabled locks: 'fixed-dialing'
            |    operator id: '23433'
            |  operator name: 'EE'
            |   subscription: 'unknown'
            |   registration: 'home'
   -------------------------
   SIM      |           path: '/org/freedesktop/ModemManager1/SIM/0'

   -------------------------
   Bearers  |          paths: '/org/freedesktop/ModemManager1/Bearer/0'


-------


  mmcli -m 0 --simple-status

/org/freedesktop/ModemManager1/Modem/0
   -------------------------
   Status |          state: 'connected'
          | signal quality: '22' (recent)
          |          bands: 'unknown'
          |    access tech: 'hsdpa, hsupa'
   -------------------------
   3GPP   |   registration: 'home'
          |  operator code: '23433'
          |  operator name: 'EE'
          |   subscription: 'unknown'

------------------------------------------------------------------------------------


I do not have an ip address. I tried to manually bring the interface up 
and get an ip address, without much luck.

sudo ifconfig wwan0 up
sudo dhclient -d wwan0

It keeps on sending DHCPDISCOVER on wwan0. Can somebody please advise 
what I am doing wrong?

Many Thanks,
Tony


More information about the ModemManager-devel mailing list