Huawei me906s-158

[Bjørn Mork]

Andreas Fett <andreas.fett at secunet.com> writes:

> <debug> [1456995669.071891] [mm-port-probe.c:525] wdm_probe_mbim(): (usbmisc/cdc-wdm0) probing MBIM...
> opening device...cannot connect to proxy: Could not connect: Connection refusedspawning new mbim-proxy (try 1)...<debug> [1456995669.172427] [mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT^SQPORT?<CR>'
> [/dev/cdc-wdm0] Read max control message size from descriptors file: 1024[/dev/cdc-wdm0] Sent message...
> <<<<<< RAW:
> <<<<<<   length = 88
> <<<<<<   data   = 03:00:00:00:58:00:00:00:01:00:00:00:01:00:00:00:00:00:00:00:83:8C:F7:FB:8D:0D:4D:7F:87:1E:D7:1D:BE:FB:B3:9B:01:00:00:00:01:00:00:00:28:00:00:00:0C:00:00:00:1A:00:00:00:1E:00:00:00:2F:00:64:00:65:00:76:00:2F:00:63:00:64:00:63:00:2D:00:77:00:64:00:6D:00:30:00:00:00
> [/dev/cdc-wdm0] Sent message (translated)...
> <<<<<< Header:
> <<<<<<   length      = 88
> <<<<<<   type        = command (0x00000003)
> <<<<<<   transaction = 1
> <<<<<< Fragment header:
> <<<<<<   total   = 1
> <<<<<<   current = 0
> <<<<<< Contents:
> <<<<<<   service = 'proxy-control' (838cf7fb-8d0d-4d7f-871e-d71dbefbb39b)
> <<<<<<   cid     = 'configuration' (0x00000001)
> <<<<<<   type    = 'set' (0x00000001)


Looks like there is some credential problem accessing the mbim-proxy. No
MBIM commands are ever sent to the modem, so we don't know if that works
or not.

I don't really know what you should do here.  Aleksander?



Bjørn