ModemManager and Iridium 9522b

[Eric Younkin - NOAA Federal]

Hello,

I am trying to get my Iridium 9522b modem recognized using mmcli.  It is
connected on /dev/ttyUSB2 with 19200, 8, N, 1.  I can successfully
communicate via AT commands through pyserial or minicom, so I'm confident
that it is functioning.

Below are the scan and list outputs from mmcli as well as lsusb.  The
usb-serial cable connected to the Iridium is Bus001 Device005.

pi at raspberrypi:/usr/lib/arm-linux-gnueabihf/ModemManager $ sudo mmcli -S
successfully requested to scan devices
pi at raspberrypi:/usr/lib/arm-linux-gnueabihf/ModemManager $ mmcli -L

No modems were found

pi at raspberrypi:/usr/lib/arm-linux-gnueabihf/ModemManager $ lsusb
Bus 001 Device 006: ID 0403:6001 Future Technology Devices International,
Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
Port
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International,
Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514
Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi at raspberrypi:/usr/lib/arm-linux-gnueabihf/ModemManager $

I know that there is a plugin for Iridium modems, specifically this 9522b
that I am using.  Is there something I need to do to get it to detect it?

Thanks,
Eric

-- 
Eric Younkin
Physical Scientist
NOAA OCS, Hydrographic Systems and Technology Branch
1315 East-West Highway
N/CS11, Room 7854
Silver Spring, MD 20910
Office: 301-713-2809 x139
Cell: 828-331-8197
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/modemmanager-devel/attachments/20170803/4f517013/attachment.html>