How to issue an "ifup broadband" when this is logged

Fri Feb 10 20:37:26 UTC 2017

Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug> IPv4 configuration
available: 'address, gateway, dns, mtu'
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug>   IP addresses (1)
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug>     IP [0]: '
25.22.233.27/29'
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug>   Gateway:
'25.22.233.28'
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug>   DNS addresses (2)
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug>     DNS [0]:
'68.28.67.132'
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug>     DNS [1]:
'68.28.68.132'
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug>   MTU: '1500'
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug> IPv6 configuration
available: 'none'
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug> (wwan0): port now
connected
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <debug> Connected bearer
'/org/freedesktop/ModemManager1/Bearer/29'
Fri Feb 10 14:33:07 2017 daemon.debug [1042]: [/dev/cdc-wdm0] Sent
message...
<<<<<< RAW:
<<<<<<   length = 48
<<<<<<   data   =
03:00:00:00:30:00:00:00:C9:02:00:00:01:00:00:00:00:00:00:00:A2:89:CC:33:BC:BB:8B:4F:B6:B0:13:3E:C2:AA:E6:DF:14:00:00:00:00:00:00:00:00:00:00:00
Fri Feb 10 14:33:07 2017 daemon.debug [1042]: [/dev/cdc-wdm0] Sent message
(translated)...
<<<<<< Header:
<<<<<<   length      = 48
<<<<<<   type        = command (0x00000003)
<<<<<<   transaction = 713
<<<<<< Fragment header:
<<<<<<   total   = 1
<<<<<<   current = 0
<<<<<< Contents:
<<<<<<   service = 'basic-connect' (a289cc33-bcbb-8b4f-b6b0-133ec2aae6df)
<<<<<<   cid     = 'packet-statistics' (0x00000014)
<<<<<<   type    = 'query' (0x00000000)
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <info>  Modem
/org/freedesktop/ModemManager1/Modem/0: state changed (connecting ->
connected)
Fri Feb 10 14:33:07 2017 daemon.info [1042]: <info>  Simple connect state
(8/8): All done
Fri Feb 10 14:33:07 2017 daemon.notice netifd: broadband (14308):
successfully connected the modem
Fri Feb 10 14:33:07 2017 daemon.debug [1042]: [/dev/cdc-wdm0] Received
message...
>>>>>> RAW:
>>>>>>   length = 96
>>>>>>   data   =
03:00:00:80:60:00:00:00:C9:02:00:00:01:00:00:00:00:00:00:00:A2:89:CC:33:BC:BB:8B:4F:B6:B0:13:3E:C2:AA:E6:DF:14:00:00:00:00:00:00:00:30:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Fri Feb 10 14:33:07 2017 daemon.debug [1042]: [/dev/cdc-wdm0] Received
message (translated)...
>>>>>> Header:
>>>>>>   length      = 96
>>>>>>   type        = command-done (0x80000003)
>>>>>>   transaction = 713
>>>>>> Fragment header:
>>>>>>   total   = 1
>>>>>>   current = 0
>>>>>> Contents:
>>>>>>   status error = 'None' (0x00000000)
>>>>>>   service      = 'basic-connect'
(a289cc33-bcbb-8b4f-b6b0-133ec2aae6df)
>>>>>>   cid          = 'packet-statistics' (0x00000014)
Fri Feb 10 14:33:07 2017 daemon.notice netifd: broadband (14308): network
operator name: Sprint
Fri Feb 10 14:33:07 2017 daemon.notice netifd: broadband (14308): network
operator MCCMNC: 310120
Fri Feb 10 14:33:07 2017 daemon.notice netifd: broadband (14308):
registration type: home
Fri Feb 10 14:33:08 2017 daemon.notice netifd: broadband (14308): access
technology: lte
Fri Feb 10 14:33:08 2017 daemon.notice netifd: broadband (14308): signal
quality: 0%
Fri Feb 10 14:33:08 2017 daemon.notice netifd: broadband (14308):
connection setup required in interface wwan0: static
Fri Feb 10 14:33:09 2017 daemon.notice netifd: broadband (14308): adding
IPv4 address 25.22.233.27, netmask 255.255.255.248
Fri Feb 10 14:33:09 2017 daemon.notice netifd: broadband (14308): adding
default IPv4 route via 25.22.233.28
Fri Feb 10 14:33:09 2017 daemon.notice netifd: broadband (14308): adding
primary DNS at 68.28.67.132
Fri Feb 10 14:33:09 2017 daemon.notice netifd: broadband (14308): adding
secondary DNS at 68.28.68.132
Fri Feb 10 14:33:09 2017 daemon.notice netifd: Interface 'broadband' is now
up
Fri Feb 10 14:33:09 2017 daemon.info dnsmasq[3116]: reading
/tmp/resolv.conf.auto
Fri Feb 10 14:33:09 2017 daemon.info dnsmasq[3116]: using local addresses
only for domain lan
Fri Feb 10 14:33:09 2017 daemon.notice netifd: Network device 'wwan0' link
is up
Fri Feb 10 14:33:09 2017 daemon.info dnsmasq[3116]: using nameserver
68.28.67.132#53
Fri Feb 10 14:33:09 2017 daemon.info dnsmasq[3116]: using nameserver
68.28.68.132#53
Fri Feb 10 14:33:09 2017 kern.info kernel: [ 7007.528440] 8021q: adding
VLAN 0 to HW filter on device wwan0
Fri Feb 10 14:33:09 2017 user.notice firewall: Reloading firewall due to
ifup of broadband (wwan0)
Fri Feb 10 14:33:10 2017 daemon.info odhcpd[736]: Initial RA router
lifetime 0, 1 address(es) available on br-lan
Fri Feb 10 14:33:11 2017 daemon.info [1042]: <debug> (ttyUSB1) device open
count is 2 (open)
Fri Feb 10 14:33:11 2017 daemon.info [1042]: <debug> (ttyUSB1): -->
'AT+CCLK?<CR>'
Fri Feb 10 14:33:11 2017 daemon.info [1042]: <debug> (ttyUSB1): <--
'<CR><LF>+CCLK: "17/02/10,20:33:29-24"<CR><LF><CR><LF>OK<CR><LF>'
Fri Feb 10 14:33:11 2017 daemon.info [1042]: <debug> (ttyUSB1) device open
count is 1 (close)
Fri Feb 10 14:33:23 2017 daemon.debug [1042]: [/dev/cdc-wdm0] Received
message...
>>>>>> RAW:
>>>>>>   length = 80
>>>>>>   data   =
07:00:00:80:50:00:00:00:00:00:00:00:01:00:00:00:00:00:00:00:A2:89:CC:33:BC:BB:8B:4F:B6:B0:13:3E:C2:AA:E6:DF:0C:00:00:00:24:00:00:00:00:00:00:00:03:00:00:00:00:00:00:00:00:00:00:00:7E:5E:2A:7E:4E:6F:72:72:73:6B:65:6E:7E:5E:2A:7E:24:00:00:00
Fri Feb 10 14:33:23 2017 daemon.debug [1042]: [/dev/cdc-wdm0] Received
message (translated)...
>>>>>> Header:
>>>>>>   length      = 80
>>>>>>   type        = indicate-status (0x80000007)
>>>>>>   transaction = 0
>>>>>> Fragment header:
>>>>>>   total   = 1
>>>>>>   current = 0
>>>>>> Contents:
>>>>>>   service = 'basic-connect' (a289cc33-bcbb-8b4f-b6b0-133ec2aae6df)
>>>>>>   cid     = 'connect' (0x0000000c)
Fri Feb 10 14:33:23 2017 daemon.info [1042]: <debug> Received notification
(service 'basic-connect', command 'connect')
Fri Feb 10 14:33:23 2017 daemon.info [1042]: <debug> Session ID '0' was
deactivated.
Fri Feb 10 14:33:23 2017 daemon.info [1042]: <debug> Bearer
'/org/freedesktop/ModemManager1/Bearer/29' was disconnected.
Fri Feb 10 14:33:23 2017 daemon.info [1042]: <debug> (wwan0): port now
disconnected
Fri Feb 10 14:33:23 2017 daemon.info [1042]: <info>  Modem
/org/freedesktop/ModemManager1/Modem/0: state changed (connected ->
registered)
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> loading access
technologies via QCDM...
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> (ttyUSB0): --> 4b 08
01 00 66 f5 7e
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> (ttyUSB0): <-- 4b 08
01 00 08 3a 95 70 02 06 52 95 59 00 00 00 00 00 00 00 00 00 0a de ad 00 00
00 00 05 05 09 bc a6 7e
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> (ttyUSB0): --> 4b 04
0f 00 d5 ca 7e
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> (ttyUSB0): <-- 4b 04
0f 00 08 3a 95 70 02 06 52 95 59 08 39 01 21 10 03 62 62 56 0a 79 c4 7e
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> QCDM operating mode: 5
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> QCDM system mode: 9
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> QCDM hybrid pref: 0
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> QCDM WCDMA open: 0
Fri Feb 10 14:33:36 2017 daemon.info [1042]: <debug> QCDM EVDO open: 0
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> loading access
technologies via QCDM...
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> (ttyUSB0): --> 4b 08
01 00 66 f5 7e
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> (ttyUSB0): <-- 4b 08
01 00 08 3a 95 70 02 06 52 95 59 00 00 00 00 00 00 00 00 00 0a de ad 00 00
00 00 05 05 09 bc a6 7e
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> (ttyUSB0): --> 4b 04
0f 00 d5 ca 7e
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> (ttyUSB0): <-- 4b 04
0f 00 08 3a 95 70 02 06 52 95 59 08 39 01 21 10 03 62 62 56 0a 79 c4 7e
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> QCDM operating mode: 5
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> QCDM system mode: 9
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> QCDM hybrid pref: 0
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> QCDM WCDMA open: 0
Fri Feb 10 14:34:06 2017 daemon.info [1042]: <debug> QCDM EVDO open: 0

On Fri, Feb 10, 2017 at 2:26 PM, Aleksander Morgado <
aleksander at aleksander.es> wrote:

> On Fri, Feb 10, 2017 at 9:11 PM, Russ Westrem
> <lspwaterproofing at gmail.com> wrote:
> > Should I set it to 0?
>
> Unset or set to 0 should be the same.
>
> Without rebooting MM, could you enable debug logs in the daemon (mmcli
> --set-logging=DEBUG) and see if we can get what kind of connection
> failure we get reported?
>
> --
> Aleksander
> https://aleksander.es
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/modemmanager-devel/attachments/20170210/987c3024/attachment-0001.html>