problem with dell latitude

[Bartłomiej Knabel]

I've compiled is as above and nothing new is printed in output.

here You have config report:

# ./configure --prefix=/usr | grep qmi
configure: WARNING:
  You will not be able to create source packages with 'make dist'
  because gtk-doc >= 1.0 is not found.
checking for qmi-glib >= 1.16.0... yes
      qmi support:             yes


2017-07-18 15:25 GMT+02:00 Bartłomiej Knabel <bartlomiej.knabel at gmail.com>:

> How this piece of source code should look like?
>
> static void
> power_up_context_step (PowerUpContext *ctx)
> {
>     switch (ctx->step) {
>     case POWER_UP_CONTEXT_STEP_FIRST:
>         set_radio_state_up (ctx);
>         return;
>
> #if defined WITH_QMI && QMI_MBIM_QMUX_SUPPORTED
> # error if this fails, were good
>
>     case POWER_UP_CONTEXT_STEP_QMI_DEVICE_NEW:
>         set_radio_state_qmi_device_new (ctx);
>         return;
>
>     case POWER_UP_CONTEXT_STEP_QMI_DEVICE_OPEN:
>         set_radio_state_qmi_device_open (ctx);
>         return;
>
>
> 2017-07-18 15:05 GMT+02:00 Aleksander Morgado <aleksander at aleksander.es>:
>
>> On Tue, Jul 18, 2017 at 2:38 PM, Bartłomiej Knabel
>> <bartlomiej.knabel at gmail.com> wrote:
>> > after recompiling in given order result is the same:
>> >
>> > # cat /usr/include/libqmi-glib/qmi-version.h  | grep "define
>> >> QMI_MBIM_QMUX_SUPPORTED"
>> > #define _QMI_VERSION_H_
>> >  * This section defines types that are used to identify the libqmi-glib
>> > version.
>> > #define QMI_MAJOR_VERSION (1)
>> > #define QMI_MINOR_VERSION (18)
>> > #define QMI_MICRO_VERSION (0)
>> > #define QMI_CHECK_VERSION(major,minor,micro)                         \
>> >  * QMI_MBIM_QMUX_SUPPORTED:
>> >  * defined and set to either or 1 or 0.
>> >  *  #if QMI_MBIM_QMUX_SUPPORTED
>> > #define QMI_MBIM_QMUX_SUPPORTED 1
>> >
>> > and one more time output from MM --debug:
>> >
>> > https://pastebin.com/KJsnvp4t
>>
>> Ok, let's check the hard way, please modify
>> src/mm-broadband-modem-mbim.c and add the following #error line:
>>
>> diff --git a/src/mm-broadband-modem-mbim.c b/src/mm-broadband-modem-mbim.
>> c
>> index 7188d2f8..56fa81f1 100644
>> --- a/src/mm-broadband-modem-mbim.c
>> +++ b/src/mm-broadband-modem-mbim.c
>> @@ -1262,6 +1262,7 @@ power_up_context_step (PowerUpContext *ctx)
>>          return;
>>
>>  #if defined WITH_QMI && QMI_MBIM_QMUX_SUPPORTED
>> +# error if this fails, we're good
>>
>>      case POWER_UP_CONTEXT_STEP_QMI_DEVICE_NEW:
>>
>> If it doesn't fail, please check whether QMI support is being included
>> in ModemManager (i.e. is "qmi: yes" being reported in the configure
>> report?)
>>
>> --
>> Aleksander
>> https://aleksander.es
>>
>
>
>
> --
> pozdrawiam,
> Bartłomiej Knabel
>



-- 
pozdrawiam,
Bartłomiej Knabel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/modemmanager-devel/attachments/20170718/28609aca/attachment.html>