[PATCH] telit: enable 'SIM ready' notifications with #QSS=2

[Carlo Lobrano]

Hi Aleksander,

I tested your patch and it seems working fine, even if #QSS: 3 always
arrives very late respect any acceptable timeout (the modem reads all SIM
values, even sms, before signaling QSS:3).
Moreover, this change would be really helpful for the issue I reported in
"[PATCH] telit: lock/unlock CSIM operations by default" thread. I'm about
to write another email about that, because I need some help there.

Thanks,
Carlo

On Wed, 15 Mar 2017 at 10:30 Aleksander Morgado <aleksander at aleksander.es>
wrote:

> On Wed, Mar 15, 2017 at 9:34 AM, Daniele Palmas <dnlplm at gmail.com> wrote:
> >> E.g. even if I remove the SIM and insert it again I get no "#QSS: 0" or
> "#QSS: 1" indication. Any idea why?
> >
> > Are you using an EVK or a custom design? I'm taking a look at the user
> > guides and it seems to me that SIM detection needs a gpio pin and
> > AT#SIMINCFG to be sent since for LE866 the default value  for the
> > first parameter is 0 (no gpio pin selected): please take a look at
> >
> http://www.telit.com/fileadmin/user_upload/media/products/cellular/4_G/LE866/1VV0301355_LE866_Hardware_Design_Guide_r0.pdf
> > page 53 and
> http://www.telit.com/fileadmin/user_upload/media/products/cellular/4_G/LE866/Telit_LE866_AT_Commands_Reference_Guide_r5.pdf
> > SIMIN pin configuration #SIMINCFG
>
> Great comments, thanks, I'll have to check that myself.
>
> --
> Aleksander
> https://aleksander.es
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/modemmanager-devel/attachments/20170317/25ec1728/attachment-0001.html>