AW: AW: h5321gw Problem with --location-get

[Thomas Lang]

I will check this today.
I tried a MC 7710 as well same problem --location-status gives that 3g location is enabled when I try --location-get I get not available. 
Does the MC 7710   have the same problem as the Ericsson one?

-----Ursprüngliche Nachricht-----
Von: Aleksander Morgado [mailto:aleksander at aleksander.es] 
Gesendet: Donnerstag, 23. März 2017 13:01
An: Thomas Lang <thomas.lang at tactilo.eu>; Dan Williams <dcbw at redhat.com>; ModemManager (development) <modemmanager-devel at lists.freedesktop.org>
Betreff: Re: AW: h5321gw Problem with --location-get

On 23/03/17 08:47, Thomas Lang wrote:
> Hmm. I tried at+CREG? To get the CellInfo. But I the response is empty. In the Debug the info is present:
> 
> ModemManager[3184]: <debug> [1490255043.880383] 
> [mm-port-serial.c:1237] mm_port_serial_open(): (cdc-wdm2) device open 
> count is 2 (open)
> ModemManager[3184]: <debug> [1490255043.880449] [mm-port-serial-at.c:440] debug_log(): (cdc-wdm2): --> 'AT+CREG?<CR><LF>'
> ModemManager[3184]: <debug> [1490255043.917955] [mm-port-serial-at.c:440] debug_log(): (cdc-wdm2): <-- '<CR><LF>+CREG: 2,1,"03B9","0EAD5D18",2<CR><LF><CR><LF>OK<CR><LF>'
> ModemManager[3184]: <debug> [1490255043.918155] 
> [mm-port-serial.c:1294] _close_internal(): (cdc-wdm2) device open 
> count is 1 (close)
> 
> Can I use the mmcli -m 0 --commnad=+CREG?

That is expected, because the response is processed by the unsolicited message handlers, so you just get an empty string as return.

Do you see any 3GPP location info reported by mmcli --location-get-3gpp after having sent +CREG with --command?

--
Aleksander
https://aleksander.es