Aw: Re: trying to connect to different operators using --3gpp-register-in-operator
marcel
mahik18 at gmx.de
Fri Oct 20 19:11:32 UTC 2017
Hey,
I did some further testing and I found some warnings while performing my
test for switching between a few operators:
ModemManager[2837]: <warn> [1508280013.114086] [mm-port-serial.c:515]
real_config_fd(): (ttyUSB0): port attributes not fully set
ModemManager[2837]: <debug> [1508280013.114511] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB0) device open count is 1 (open)
ModemManager[2837]: <debug> [1508280013.114716]
[mm-port-serial-at.c:476] mm_port_serial_at_run_init_sequence():
(ttyUSB0): running init sequence...
ModemManager[2837]: <debug> [1508280013.115232] [mm-port-serial.c:1099]
mm_port_serial_open(): (ttyUSB2) opening serial port...
ModemManager[2837]: <warn> [1508280013.117749] [mm-port-serial.c:515]
real_config_fd(): (ttyUSB2): port attributes not fully set
ModemManager[2837]: <debug> [1508280013.119844] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB2) device open count is 1 (open)
ModemManager[2837]: <debug> [1508280013.122116]
[mm-port-serial-at.c:476] mm_port_serial_at_run_init_sequence():
(ttyUSB2): running init sequence...
ModemManager[2837]: <debug> [1508280013.123278]
[mm-broadband-modem.c:8016] enabling_started(): Flashing primary AT port
before enabling...
ModemManager[2837]: <debug> [1508280013.127274]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'ATE0<CR>'
ModemManager[2837]: <debug> [1508280013.128563]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
ModemManager[2837]: <debug> [1508280013.227661]
[mm-broadband-modem.c:3132] load_power_state(): loading power state...
ModemManager[2837]: <debug> [1508280013.234163] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB0) device open count is 2 (open)
ModemManager[2837]: <debug> [1508280013.603986]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.609967]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'ATV1<CR>'
ModemManager[2837]: <debug> [1508280013.623845]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.628900]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.630455]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT+CMEE=1<CR>'
ModemManager[2837]: <debug> [1508280013.648701]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.650298]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'ATX4<CR>'
ModemManager[2837]: <debug> [1508280013.662284]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.663120]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT&C1<CR>'
ModemManager[2837]: <debug> [1508280013.672534]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.673366]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT+CFUN?<CR>'
ModemManager[2837]: <debug> [1508280013.690510]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>+CFUN:
1<CR><LF><CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.692354] [mm-iface-modem.c:3259]
set_power_state(): No need to change power state: already in 'on' power
state
ModemManager[2837]: <debug> [1508280013.693418] [mm-port-serial.c:1296]
mm_port_serial_close(): (ttyUSB0) device open count is 1 (close)
ModemManager[2837]: <debug> [1508280013.694636] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB0) device open count is 2 (open)
ModemManager[2837]: <debug> [1508280013.697023] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB0) device open count is 3 (open)
ModemManager[2837]: <debug> [1508280013.702588]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT+IFC=1,1<CR>'
ModemManager[2837]: <debug> [1508280013.724477]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>+CME
ERROR: 50<CR><LF>'
ModemManager[2837]: Invalid mobile equipment error code: 50
ModemManager[2837]: <debug> [1508280013.725338]
[mm-serial-parsers.c:364] mm_serial_parser_v1_parse(): Got failure code
100: Unknown error
ModemManager[2837]: <debug> [1508280013.725604] [mm-port-serial.c:1296]
mm_port_serial_close(): (ttyUSB0) device open count is 2 (close)
ModemManager[2837]: <warn> [1508280013.725990] [mm-port-serial.c:811]
port_serial_queue_process(): (ttyUSB0) response array is not empty when
using cached reply, cleaning up 14 bytes
is one error sequence
the other error is
ModemManager[2837]: <warn> [1508280021.578899]
[huawei/mm-broadband-modem-huawei.c:2181]
mm_broadband_modem_huawei_peek_port_at_for_data(): Couldn't find
associated cdc-wdm port for 'net/usb0'
Just to update:
The modem is still a Huawei ME909s-120
it's about connecting to 3 or 4 mobile networks, measuring download
speed or similar stuff for each of them
One problem is that I get timeout errors for --3gpp-register-in-operator
if I was connected to a different operator before
e.g. I connect to one operator, it succeeds and I can measure download
speed etc, then if I want to connect to a different operator like 15
seconds after I connected to the first one and it needs 10-15 seconds
until I get a timeout error, I suggest because the modem is still busy
with the previous operations for connecting with the first
operator?!(correct me if I'm wrong)
Is there a way to stabilize connecting that way to different operators?
Because I think I wouldn't have the second problem if that first one was
solved
The second problem is that I get a weird timeout error at disabling the
modem after I recognize that connecting to the third network fails and I
therefore want to disconnect, disable and enable the modem to try
connecting again
When I try to connect to the second operator I just get a timeout error
and after that I try it again with disconnecting, disable and enable the
modem again and then it works
Kind regards,
Marcel
On 15.10.2017 11:35, Marcel H. wrote:
> Aah, thanks a lot!
> It's just a regular timeout error
> As well as the error when I try to disable the modem is also a timeout
> error
> So maybe I should check somehow if the modem is still busy or
> something like that
> However, I'll do some further testing tomorrow and will come back if I
> find out some more
> Am 15.10.2017, 10:37, Aleksander Morgado <aleksander at aleksander.es>
> schrieb:
>
> Hey,
>
> > I have a problem when frequently changing operators
> >
> > I tried to connect to 3 different operators, first enable the
> modem, then
> > try to register in operator, if successfully I use
> simple-connect and
> > measure upload speed etc, then disconnect and disable modem and
> start over
> > again
> >
> > Well I have some problems now to set up a stable way to connect
> to the 3rd
> > operator
> >
> > When I enable the modem and try to use
> --3gpp-register-in-operator, it is
> > hard to say if it succeeds, so if it doesn't, I just disconnect,
> disable and
> > enable again, but when I disable the modem at that point it
> seems kind of
> > busy doing something, but I don't understand what it actually does
> >
> > I tried to debug mm, but I still don't get it, I hope you don't
> mind me
> > posting a piece of the debugging output here:
> >
> > ModemManager[4471]: <debug> [1507757863.162630]
> > [huawei/mm-broadband-modem-huawei.c:2438]
> modem_load_signal_quality():
> > loading signal quality...
> > ModemManager[4471]: <debug> [1507757863.163091]
> [mm-broadband-modem.c:1991]
> > modem_load_signal_quality(): loading signal quality...
> > ModemManager[4471]: <debug> [1507757863.163565]
> [mm-port-serial.c:1237]
> > mm_port_serial_open(): (ttyUSB0) device open count is 6 (open)
> > ModemManager[4471]: <info> [1507757864.691217]
> [mm-iface-modem.c:1392]
> > __iface_modem_update_state_internal(): Modem
> > /org/freedesktop/ModemManager1/Modem/0: state changed (registered ->
> > disabling)
> > ModemManager[4471]: <debug> [1507757864.705892]
> [mm-iface-modem.c:1165]
> > update_signal_quality(): Modem
> /org/freedesktop/ModemManager1/Modem/0:
> > signal quality updated (0)
> > ModemManager[4471]: <debug> [1507757864.712021]
> [mm-iface-modem.c:1282]
> > periodic_signal_quality_check_disable(): Periodic signal quality
> checks
> > disabled
> > ModemManager[4471]: <debug> [1507757864.713914]
> [mm-iface-modem.c:894]
> > mm_iface_modem_update_access_technologies(): Modem
> > /org/freedesktop/ModemManager1/Modem/0: access technology
> changed (umts ->
> > unknown)
> > ModemManager[4471]: <debug> [1507757864.719503]
> [mm-iface-modem.c:1008]
> > periodic_access_technologies_check_disable(): Periodic access
> technology
> > checks disabled
> > ModemManager[4471]: <debug> [1507757864.726004]
> [mm-broadband-modem.c:8282]
> > disabling_step(): Modem has messaging capabilities, disabling
> the Messaging
> > interface...
> > ModemManager[4471]: <debug> [1507757864.731147]
> [mm-broadband-modem.c:5791]
> > set_messaging_unsolicited_events_handlers(): (ttyUSB0) Removing
> messaging
> > unsolicited events handlers
> > ModemManager[4471]: <debug> [1507757864.732277]
> [mm-broadband-modem.c:5791]
> > set_messaging_unsolicited_events_handlers(): (ttyUSB2) Removing
> messaging
> > unsolicited events handlers
> > ModemManager[4471]: <debug> [1507757864.733760]
> [mm-broadband-modem.c:8294]
> > disabling_step(): Modem has location capabilities, disabling the
> Location
> > interface...
> > ModemManager[4471]: <debug> [1507757864.734843]
> > [mm-iface-modem-location.c:765] setup_gathering(): Need to
> disable the
> > following location sources: '3gpp-lac-ci'
> > ModemManager[4471]: <debug> [1507757864.744200]
> [mm-broadband-modem.c:8322]
> > disabling_step(): Modem has 3GPP/USSD capabilities, disabling
> the Modem
> > 3GPP/USSD interface...
> > ModemManager[4471]: <debug> [1507757864.745383]
> [mm-port-serial.c:1237]
> > mm_port_serial_open(): (ttyUSB0) device open count is 7 (open)
> > ModemManager[4471]: <debug> [1507757917.238256]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB2): <-- '<CR><LF>^RSSI: 3<CR><LF>'
> > ModemManager[4471]: <debug> [1507757917.248108]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>^RSSI: 3<CR><LF><CR><LF>^HCSQ:
> > "WCDMA",29,15,37<CR><LF>'
> > ModemManager[4471]: <debug> [1507757917.249324]
> > [huawei/mm-broadband-modem-huawei.c:1543]
> huawei_signal_changed(): 3GPP
> > signal quality: 9
> > ModemManager[4471]: <debug> [1507757917.256592]
> [mm-iface-modem.c:1165]
> > update_signal_quality(): Modem
> /org/freedesktop/ModemManager1/Modem/0:
> > signal quality updated (9)
> > ModemManager[4471]: <debug> [1507757917.259668]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB2): <-- '<CR><LF>^HCSQ:
> "WCDMA",29,15,37<CR><LF>'
> > ModemManager[4471]: <info> [1507757938.156182]
> [mm-iface-modem-3gpp.c:1169]
> > update_registration_state(): Modem
> /org/freedesktop/ModemManager1/Modem/0:
> > 3GPP Registration state changed (searching -> idle)
> > ModemManager[4471]: <debug> [1507757938.162515]
> [mm-base-bearer.c:260]
> > modem_3gpp_registration_state_changed(): Bearer not allowed to
> connect, not
> > registered in 3GPP network
> > ModemManager[4471]: <debug> [1507757938.163074]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 6 (close)
> > ModemManager[4471]: <debug> [1507757938.186571]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): --> 'AT+COPS=3,2;+COPS?<CR>'
> > ModemManager[4471]: <debug> [1507757938.217214]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>+COPS:
> > 1,2,"26203",2<CR><LF><CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.228361]
> > [huawei/mm-broadband-modem-huawei.c:2038]
> modem_3gpp_load_operator_name():
> > loading Operator Name (huawei)...
> > ModemManager[4471]: <debug> [1507757938.230356]
> [mm-port-serial.c:1237]
> > mm_port_serial_open(): (ttyUSB0) device open count is 7 (open)
> > ModemManager[4471]: <debug> [1507757938.237333]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 6 (close)
> > ModemManager[4471]: <debug> [1507757938.239402]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): --> 'AT^SYSINFOEX<CR>'
> > ModemManager[4471]: <debug> [1507757938.267262]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>^SYSINFOEX:
> > 2,3,1,1,,3,"WCDMA",41,"WCDMA"<CR><LF><CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.268511]
> > [huawei/mm-broadband-modem-huawei.c:582]
> load_access_technologies_finish():
> > Access Technology: 'umts'
> > ModemManager[4471]: <debug> [1507757938.269158]
> [mm-iface-modem.c:894]
> > mm_iface_modem_update_access_technologies(): Modem
> > /org/freedesktop/ModemManager1/Modem/0: access technology
> changed (unknown
> > -> umts)
> > ModemManager[4471]: <debug> [1507757938.269472]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 5 (close)
> > ModemManager[4471]: <debug> [1507757938.281278]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): --> 'AT+CSQ<CR>'
> > ModemManager[4471]: <debug> [1507757938.296941]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>+CSQ:
> 3,99<CR><LF><CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.297864]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 4 (close)
> > ModemManager[4471]: <debug> [1507757938.298720]
> [mm-iface-modem.c:1165]
> > update_signal_quality(): Modem
> /org/freedesktop/ModemManager1/Modem/0:
> > signal quality updated (9)
> > ModemManager[4471]: <debug> [1507757938.299179]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): --> 'AT+CSQ<CR>'
> > ModemManager[4471]: <debug> [1507757938.312601]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>+CSQ:
> 3,99<CR><LF><CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.313516]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 3 (close)
> > ModemManager[4471]: <debug> [1507757938.314367]
> [mm-iface-modem.c:1165]
> > update_signal_quality(): Modem
> /org/freedesktop/ModemManager1/Modem/0:
> > signal quality updated (9)
> > ModemManager[4471]: <debug> [1507757938.315042]
> [mm-broadband-modem.c:4908]
> > set_unsolicited_result_code_handlers(): (ttyUSB0) Removing
> unsolicited
> > result code handlers
> > ModemManager[4471]: <debug> [1507757938.315297]
> [mm-broadband-modem.c:4908]
> > set_unsolicited_result_code_handlers(): (ttyUSB2) Removing
> unsolicited
> > result code handlers
> > ModemManager[4471]: <debug> [1507757938.315563]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 2 (close)
> > ModemManager[4471]: <debug> [1507757938.327921]
> [mm-broadband-modem.c:8334]
> > disabling_step(): Modem has 3GPP capabilities, disabling the
> Modem 3GPP
> > interface...
> > ModemManager[4471]: <debug> [1507757938.329574]
> [mm-iface-modem-3gpp.c:1310]
> > periodic_registration_check_disable(): Periodic 3GPP
> registration checks
> > disabled
> > ModemManager[4471]: <debug> [1507757938.332616]
> [mm-port-serial.c:1237]
> > mm_port_serial_open(): (ttyUSB0) device open count is 3 (open)
> > ModemManager[4471]: <debug> [1507757938.335165]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): --> 'AT+COPS=3,0;+COPS?<CR>'
> > ModemManager[4471]: <debug> [1507757938.370516]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>+COPS:
> > 1,0,"E-Plus",2<CR><LF><CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.371558]
> > [huawei/mm-broadband-modem-huawei.c:2028]
> > modem_3gpp_load_operator_name_finish(): loaded Operator Name: E-Plus
> > ModemManager[4471]: <debug> [1507757938.372172]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 2 (close)
> > ModemManager[4471]: <info> [1507757938.379425]
> [mm-iface-modem-3gpp.c:1079]
> > update_registration_reload_current_registration_info_ready(): Modem
> > /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state
> changed
> > (registering -> roaming)
> > ModemManager[4471]: <debug> [1507757938.391976]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): --> 'AT+CREG=0<CR>'
> > ModemManager[4471]: <debug> [1507757938.412542]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.413389]
> [mm-port-serial.c:1237]
> > mm_port_serial_open(): (ttyUSB2) device open count is 2 (open)
> > ModemManager[4471]: <debug> [1507757938.413937]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 1 (close)
> > ModemManager[4471]: <debug> [1507757938.414343]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB2): --> 'AT+CREG=0<CR>'
> > ModemManager[4471]: <debug> [1507757938.430404]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.432294]
> [mm-port-serial.c:1237]
> > mm_port_serial_open(): (ttyUSB0) device open count is 2 (open)
> > ModemManager[4471]: <debug> [1507757938.432761]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB2) device open count is 1 (close)
> > ModemManager[4471]: <debug> [1507757938.435627]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): --> 'AT+CGREG=0<CR>'
> > ModemManager[4471]: <debug> [1507757938.461267]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.462188]
> [mm-port-serial.c:1237]
> > mm_port_serial_open(): (ttyUSB2) device open count is 2 (open)
> > ModemManager[4471]: <debug> [1507757938.462626]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 1 (close)
> > ModemManager[4471]: <debug> [1507757938.463019]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB2): --> 'AT+CGREG=0<CR>'
> > ModemManager[4471]: <debug> [1507757938.483758]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.484400]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB2) device open count is 1 (close)
> > ModemManager[4471]: <debug> [1507757938.486265]
> [mm-broadband-modem.c:3648]
> > modem_3gpp_cleanup_unsolicited_registration_events(): (ttyUSB0)
> cleaning up
> > unsolicited registration messages handlers
> > ModemManager[4471]: <debug> [1507757938.489370]
> [mm-broadband-modem.c:3648]
> > modem_3gpp_cleanup_unsolicited_registration_events(): (ttyUSB2)
> cleaning up
> > unsolicited registration messages handlers
> > ModemManager[4471]: <debug> [1507757938.497321]
> [mm-port-serial.c:1237]
> > mm_port_serial_open(): (ttyUSB0) device open count is 2 (open)
> > ModemManager[4471]: <debug> [1507757938.503806]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): --> 'AT^CURC=0<CR>'
> > ModemManager[4471]: <debug> [1507757938.524718]
> [mm-port-serial-at.c:440]
> > debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
> > ModemManager[4471]: <debug> [1507757938.525473]
> [mm-port-serial.c:1296]
> > mm_port_serial_close(): (ttyUSB0) device open count is 1 (close)
> > ModemManager[4471]: <info> [1507757938.526055]
> [mm-iface-modem-3gpp.c:1169]
> > update_registration_state(): Modem
> /org/freedesktop/ModemManager1/Modem/0:
> > 3GPP Registration state changed (roaming -> unknown)
> > ModemManager[4471]: <debug> [1507757938.530230]
> [mm-base-bearer.c:260]
> > modem_3gpp_registration_state_changed(): Bearer not allowed to
> connect, not
> > registered in 3GPP network
> > ModemManager[4471]: <debug> [1507757938.537998]
> [mm-iface-modem.c:894]
> > mm_iface_modem_update_access_technologies(): Modem
> > /org/freedesktop/ModemManager1/Modem/0: access technology
> changed (umts ->
> > unknown)
> >
> >
> > I think the problem is somewhere here to find, but I just don't
> see the
> > point
> >
> > The lines before those I just postet were about the
> > --3gpp-register-in-operator, but as it failed, I just
> disconnected and
> > disabled again, but it nevertheless seemed to update some signal
> quality
> > stuff
> >
> > Is the problem something about that "Removing unsolicited result
> code
> > handlers" and "cleaning up unsolicited registration messages
> handlers"
> > stuff?
> >
> >
> > Well I should now also say something about the hardware I use:
> >
> > I'm using a Huawei ME909s-120 with the mmcli version 1.4.0
> >
> >
> > I hope you can help me, as I really have no more idea what to do
> anymore
> >
> > If I can provide you any helpful information, just tell me
> >
> >
>
> What's the error you get when trying to register in the operator
> manually?
>
> The sequence you posted looks mostly good to me, all that happens when
> you disable the modem (e.g. removing unsolicited message handlers,
> disabling periodic polling of reg info or signal quality...). There is
> one thing, though, that gets in the middle of the disabling sequence,
> which is the "AT+COPS=3,0;+COPS?" call and its response, but that may
> just be because it was scheduled before the disabling sequence started
> to happen, but that shouldn't have any big effect, I think.
>
> --
> Aleksander
> https://aleksander.es
>
>
>
> _______________________________________________
> ModemManager-devel mailing list
> ModemManager-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/modemmanager-devel/attachments/20171020/4369a3d8/attachment-0001.html>
More information about the ModemManager-devel
mailing list