[PATCH] ublox: ignore ttyACM0
Aleksander Morgado
aleksander at aleksander.es
Tue Mar 6 21:10:01 UTC 2018
On Tue, Mar 6, 2018 at 5:56 PM, Aleksander Morgado
<aleksander at aleksander.es> wrote:
> We used ttyACM0 as secondary port until now, just because we had an
> extra AT capable TTY around in addition to the main control ttyACM2
> port.
>
> Turns out, using this ttyACM0 may actually break the connection setup
> in the wwan interface in a bad way (e.g. not allowing DHCP setup).
>
> The suggestion from u-blox and Intel is to fully ignore ttyACM0; and
> given that we no longer need any primary/secondary port logic, we just
> remove all the associated udev tags.
Should have said in the commit message that this applies to the
*TOBY-L4* btw. Will do that change in the commit message once this one
gets in, unless there's some more changes to do.
> ---
> plugins/ublox/77-mm-ublox-port-types.rules | 7 +++----
> plugins/ublox/mm-plugin-ublox.c | 29 -----------------------------
> 2 files changed, 3 insertions(+), 33 deletions(-)
>
> diff --git a/plugins/ublox/77-mm-ublox-port-types.rules b/plugins/ublox/77-mm-ublox-port-types.rules
> index 0c5b0961..cb77f0e0 100644
> --- a/plugins/ublox/77-mm-ublox-port-types.rules
> +++ b/plugins/ublox/77-mm-ublox-port-types.rules
> @@ -8,13 +8,12 @@ LABEL="mm_ublox_port_types"
> SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*", ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"
>
> # Toby-L4 port types
> -# ttyACM0 (if #2): secondary
> +# ttyACM0 (if #2): secondary (ignore)
> # ttyACM1 (if #4): debug port (ignore)
> # ttyACM2 (if #6): primary
> # ttyACM3 (if #8): AT port for FOTA (ignore)
> -ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1010", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_UBLOX_SECONDARY_PORT}="1"
> +ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1010", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_PORT_IGNORE}="1"
> ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1010", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_PORT_IGNORE}="1"
> -ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1010", ENV{.MM_USBIFNUM}=="06", ENV{ID_MM_UBLOX_PRIMARY_PORT}="1"
> ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1010", ENV{.MM_USBIFNUM}=="08", ENV{ID_MM_PORT_IGNORE}="1"
>
> -LABEL="mm_ublox_port_types_end"
> \ No newline at end of file
> +LABEL="mm_ublox_port_types_end"
> diff --git a/plugins/ublox/mm-plugin-ublox.c b/plugins/ublox/mm-plugin-ublox.c
> index 5ee09a20..fc9ec0c6 100644
> --- a/plugins/ublox/mm-plugin-ublox.c
> +++ b/plugins/ublox/mm-plugin-ublox.c
> @@ -47,34 +47,6 @@ create_modem (MMPlugin *self,
> product));
> }
>
> -static gboolean
> -grab_port (MMPlugin *self,
> - MMBaseModem *modem,
> - MMPortProbe *probe,
> - GError **error)
> -{
> - MMPortSerialAtFlag pflags = MM_PORT_SERIAL_AT_FLAG_NONE;
> - MMKernelDevice *port;
> - MMPortType port_type;
> -
> - port_type = mm_port_probe_get_port_type (probe);
> - port = mm_port_probe_peek_port (probe);
> -
> - if (mm_kernel_device_get_property_as_boolean (port, "ID_MM_UBLOX_PRIMARY_PORT")) {
> - mm_dbg ("(%s/%s)' port flagged as primary",
> - mm_port_probe_get_port_subsys (probe),
> - mm_port_probe_get_port_name (probe));
> - pflags = MM_PORT_SERIAL_AT_FLAG_PRIMARY;
> - } else if (mm_kernel_device_get_property_as_boolean (port, "ID_MM_UBLOX_SECONDARY_PORT")) {
> - mm_dbg ("(%s/%s) port flagged as secondary",
> - mm_port_probe_get_port_subsys (probe),
> - mm_port_probe_get_port_name (probe));
> - pflags = MM_PORT_SERIAL_AT_FLAG_SECONDARY;
> - }
> -
> - return mm_base_modem_grab_port (modem, port, port_type, pflags, error);
> -}
> -
> /*****************************************************************************/
> /* Custom init context */
>
> @@ -295,5 +267,4 @@ mm_plugin_ublox_class_init (MMPluginUbloxClass *klass)
> MMPluginClass *plugin_class = MM_PLUGIN_CLASS (klass);
>
> plugin_class->create_modem = create_modem;
> - plugin_class->grab_port = grab_port;
> }
> --
> 2.15.1
>
--
Aleksander
https://aleksander.es
More information about the ModemManager-devel
mailing list