Run ModemManager in debug mode

[NIKHIL PATIL]

Hi ,
   ModemManager has compiled successfully . but when i am doing * mmcli -m
0 --command="ATI" *
*    output - *operation is only allowed in debug mode.



On Tue, Dec 29, 2020 at 9:34 PM Frederic Martinsons <
frederic.martinsons at sigfox.com> wrote:

> What do you mean exactly by "it doesn't work"? Is configure of
> modemmanager had not been executed with the above mentioned option?
> Did you check the configure log made by yocto?
> Anyway, I think we are off the road here since it became a yocto issue
> rather than a modem manager one.
> ------------------------------
> *From:* NIKHIL PATIL <nikhilvp29 at gmail.com>
> *Sent:* Tuesday, December 29, 2020 1:59:10 PM
> *To:* Frederic Martinsons <frederic.martinsons at sigfox.com>
> *Cc:* Aleksander Morgado <aleksander at aleksander.es>; ModemManager
> (development) <modemmanager-devel at lists.freedesktop.org>
> *Subject:* Re: Run ModemManager in debug mode
>
> Hi ,
>    I created modemmanager_1.6.4.bbappend file and in these i copied above
> data.
>    i tried these it not worked.
>   Is there another method ?
>
> On Mon, Dec 28, 2020 at 3:20 PM Frederic Martinsons <
> frederic.martinsons at sigfox.com> wrote:
>
> Hi, for adding this to configure option , you need to add
>
> EXTRA_OECONF +=  " --with-at-command-via-dbus"
>
> to the modemmanager recipe or create a bbappend in your custom layer.
> ------------------------------
> *From:* ModemManager-devel <
> modemmanager-devel-bounces at lists.freedesktop.org> on behalf of NIKHIL
> PATIL <nikhilvp29 at gmail.com>
> *Sent:* Monday, December 28, 2020 9:28 AM
> *To:* Aleksander Morgado <aleksander at aleksander.es>
> *Cc:* ModemManager (development) <modemmanager-devel at lists.freedesktop.org
> >
> *Subject:* Re: Run ModemManager in debug mode
>
> Hi Aleksander ,
>        How we can add these debug option while build time only  on yocto
> build . any idea ?
>
> On Wed, Dec 9, 2020 at 4:08 PM NIKHIL PATIL <nikhilvp29 at gmail.com> wrote:
>
> Hi Aleksander ,
>     We want to add debug option ad build time only ,  How we can add these
> debug option while build time only  on yocto build side ?
>     ModemManager package is in meta-openembedded layer .
>
>     build platform :- yocto
>
>
> On Mon, Dec 7, 2020 at 7:09 PM Aleksander Morgado <
> aleksander at aleksander.es> wrote:
>
> Hey
>
> The --debug option gives you 2 things: debug log and AT command
> support via the Command() API.
>
> The mmcli -G DEBUG option only changes the debug log level.
>
> If you need the AT command support via Command() you need either the
> --debug option as you were using, or otherwise make sure you build
> ModemManager using the --with-at-command-via-dbus configure option
>
> On Mon, Dec 7, 2020 at 11:18 AM NIKHIL PATIL <nikhilvp29 at gmail.com> wrote:
> >
> > Hi ,
> >  I tried to enable using    " mmcli -G DEBUG "  it come successfully
> enable debug logging level .
> >   but , when we run AT command using mmcli we are getting same error as
> before (error :- modemmanager should in debug mode ).
> >   how we can proceed on these ?
> >
> > On Sun, Dec 6, 2020 at 1:17 PM Aleksander Morgado <
> aleksander at aleksander.es> wrote:
> >>
> >> Hey
> >>
> >> >     After board boots we are changing the ModeManger.service as
> (ExecStart=/usr/sbin/ModemManager --debug)
> >> > but that is not good practice.
> >> >
> >> >     How We can run ModemManager in debug mode while compiling yocto
> image itself ?
> >> >     build platform = yocto
> >>
> >> The --debug option gives you 2 things: debug log and AT command
> >> support via the Command() API.
> >>
> >> If it's a change you require always by default in all your builds, you
> >> could patch the ModemManager recipe to modify the service file to add
> >> the --debug.
> >>
> >> If you need to enable the debug log only sometimes during runtime, you
> >> could use "mmcli -G DEBUG" to change the daemon logging level.
> >>
> >> If what you need is to unconditionally have AT command support via the
> >> Command() API always, you can modify the ModemManager recipe to
> >> configure the build with the --with-at-command-via-dbus option, that
> >> will enable that API by default regardless of whether --debug is used
> >> during runtime or not.
> >>
> >> --
> >> Aleksander
> >> https://aleksander.es
>
>
>
> --
> Aleksander
> https://aleksander.es
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/modemmanager-devel/attachments/20201230/c3fd5d93/attachment.htm>