Adding Telit ME310G1-WW support

[Mark Deneen]

On Mon, Jul 13, 2020 at 1:13 PM Mark Deneen <mdeneen at gmail.com> wrote:
>
> On Mon, Jul 13, 2020 at 1:04 PM Daniele Palmas <dnlplm at gmail.com> wrote:
> >
> > Hi Mark,
> >
> > Il giorno lun 13 lug 2020 alle ore 15:17 Mark Deneen
> > <mdeneen at gmail.com> ha scritto:
> > >
> > > Daniele,
> > >
> > > > @Mark, did you check if there's a more recent firmware update than the
> > > > one you are using?
> > >
> > > I'm running 37.00.210-B038-P0C.210000, but I'm having trouble
> > > understanding if any of the available firmware releases apply to the
> > > model number that I have.  Regardless, the firmware seems only made
> > > available as Windows binaries and my modem is soldered to a board with
> > > an ARM processor.  Is there a way to update the firmware in Linux?  I
> > > have used the HE910 module in the past and was able to flash firmware
> > > from an ARM-based Linux platform, but perhaps they do things
> > > differently now.
> > >
> >
> > better reach directly Telit TS for both the things.
>
> Indeed -- I am awaiting a response.  Thanks again for your help!


I received word from Telit support -- the missing "CONNECT" message is
a known issue.  While there is no release as of yet to correct this,
it is slated for August.

I'm thinking that the answer here is to forget this patch, knowing
that it will be fixed in the not-too-distant future in a firmware
release.  Thoughts?

-M