Telit LE910C1 - GPS integration

[Daniele Palmas]

Hi Aleksander and David,

Il giorno mar 5 mag 2020 alle ore 17:14 Aleksander Morgado
<aleksander at aleksander.es> ha scritto:
>
> Hey Daniele & David
>
>
> Daniele, any idea why we're not receiving NMEA traces via QMI
> indications in this case? Do you see something wrong in the sequence
> to enable the GNSS location gathering?
>

Let me check with the firmware developers.

Regards,
Daniele

> >
> > Note this was added to the udev rule for gps port with clean MM 1.12.8
> > # LE910C1 with default usb cfg
> > ATTRS{idVendor}=="1bc7", ATTRS{idProduct}=="1201", ENV{.MM_USBIFNUM}=="00", ENV{ID_MM_PORT_IGNORE}="1"
> > ATTRS{idVendor}=="1bc7", ATTRS{idProduct}=="1201", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_PORT_TYPE_GPS}="1"
> > ATTRS{idVendor}=="1bc7", ATTRS{idProduct}=="1201", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_PORT_TYPE_AT_PRIMARY}="1"
> > ATTRS{idVendor}=="1bc7", ATTRS{idProduct}=="1201", ENV{.MM_USBIFNUM}=="05", ENV{ID_MM_PORT_TYPE_AT_SECONDARY}="1"
> > ATTRS{idVendor}=="1bc7", ATTRS{idProduct}=="1201", ENV{.MM_USBIFNUM}=="06", ENV{ID_MM_PORT_IGNORE}="1"
> >
>
> Not truly needed for the QMI case, as all NMEA traces should be
> received via QMI LOC indications.
>
> --
> Aleksander
> https://aleksander.es