5G connection establishment
rspmn at arcor.de
Tue Sep 29 17:00:22 UTC 2020
On Tue, Sep 29, 2020 at 02:40:31PM +0000, Federico Murciano wrote:
> Si Sebastian,
> When I run the at+qeng=???servingcell??? command with mmcli as:
> sudo mmcli -m 0 --command=at+qeng=???servingcell???
> I get the following error:
> GDBus.Error:org.freedesktop.ModemManager1.Error.Connection.NoCarrier: No carrier'
> Do you know why am I getting it?
> Thank you!
you have to take shell quoting into account:
$ echo sudo mmcli -m 0 --command=at+qeng="servingcell"
sudo mmcli -m 0 --command=at+qeng=servingcell
$ echo sudo mmcli -m 0 '--command=at+qeng="servingcell"'
sudo mmcli -m 0 --command=at+qeng="servingcell"
> Federico Murciano
> B.Sc. Telecommunications Engineer
> federico.murciano at dai-labor.de
> Tel. +49 (0) 30/314 -74 025
> Future in touch.
> Technische Universität Berlin
> Fakultät IV ??? Elektrotechnik & Informatik Sekretariat TEL 14 Ernst-Reuter-Platz 7
> 10587 Berlin, Germany
> DAI-Labor - Distributed Artificial Intelligence Laboratory Chief Executive Director: Prof. Dr. Dr. h.c. Sahin Albayrak
> Von: Sebastian Sjöholm <sebastian.sjoholm at gmail.com>
> Gesendet: Dienstag, 29. September 2020 05:37
> An: Nick B
> Cc: Federico Murciano; modemmanager-devel at lists.freedesktop.org
> Betreff: Re: 5G connection establishment
> When using NSA (ENDC) the anchor will always be LTE, so for the modem LTE will be the primary network.
> The NR will only be used for the user plane, and activated only during data session, but even during data session signalling (control plane) will be on LTE.
> Depending on network setup, the NR session will be disconnected right after the data session. At some it can be instant, other might have longer timeouts.
> On RM500 you can check with at+qeng=???servingcell??? and on SIM8200 at+cpsi? to see if the additional NR cell is connected after or during data session.
> > On 29 Sep 2020, at 00:21, Nick B <nickberry17 at icloud.com> wrote:
> > ???Hey,
> > Just for the record, I am having the excat same experience in Australia with at Quectel RM500Q-GL and SIMCOM SIM8200EA-M2. Is there any debugging info that would be helpful?
> > Best,
> > Nick
> > _______________________________________________
> > ModemManager-devel mailing list
> > ModemManager-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
> ModemManager-devel mailing list
> ModemManager-devel at lists.freedesktop.org
More information about the ModemManager-devel