Snapdragon X55 (Thinkpad X1 Nano w/5G Modem)

Bjørn Mork bjorn at mork.no
Wed May 12 07:34:38 UTC 2021


Oskar Stenman <oskar at cetex.se> writes:

> After that i could run:
> $ sudo qmicli -p -d /dev/wwan0p2MBIM --device-open-mbim
> --dms-dell-cuskit-unlock=00
> [11 maj 2021, 23:42:36] -Warning ** [/dev/wwan0p2MBIM] couldn't detect
> transport type of port: couldn't detect device driver
> [11 maj 2021, 23:42:36] -Warning ** [/dev/wwan0p2MBIM] requested MBIM mode
> but unexpected transport type found
> [/dev/wwan0p2MBIM] Successfully run Dell cuskit unlock
>
> I've attached the log from ModemManager and i can see a ton of stuff
> happening after i send that command with cuskit, 


Coool!  So that actually worked.  Have to talk to my boss about getting
a new laptop, then :-)


Not sure why you get those QMI indications, but anyway - this is good:

                                                                 <<<<<< QMUX:
                                                                 <<<<<<   length  = 43
                                                                 <<<<<<   flags   = 0x80
                                                                 <<<<<<   service = "nas"
                                                                 <<<<<<   client  = 4
                                                                 <<<<<< QMI:
                                                                 <<<<<<   flags       = "indication"
                                                                 <<<<<<   transaction = 11
                                                                 <<<<<<   tlv_length  = 31
                                                                 <<<<<<   message     = "Serving System" (0x0024)
                                                                 <<<<<< TLV:
                                                                 <<<<<<   type       = "Serving System" (0x01)
                                                                 <<<<<<   length     = 6
                                                                 <<<<<<   value      = 01:01:01:02:01:08
                                                                 <<<<<<   translated = [ registration_state = 'registered' cs_attach_state = 'attached' ps_attach_state = 'attached' selected_network = '3gpp' radio_interfaces = '{ [0] = 'lte '}' ]






Bjørn


More information about the ModemManager-devel mailing list