4G stopped working after upgrading Mobian Linux
Aleksander Morgado
aleksander at aleksander.es
Mon Feb 21 13:59:36 UTC 2022
Hey,
On Mon, Feb 21, 2022 at 2:57 PM <gouessej at orange.fr> wrote:
>
> ----------------------------
> 3GPP profile manager | list: profile-id: 1
> | apn:
> | ip-type: ipv4v6
> | profile-id: 2
> | apn: ims
> | ip-type: ipv4v6
> | profile-id: 3
> | apn:
> | ip-type: ipv4v6
> | profile-id: 4
> | apn: ao.fr
> | ip-type: ipv4v6
> | profile-id: 5
> | apn: ofnew.fr
> | ip-type: ipv4v6
> | profile-id: 6
> | apn: orange.acte
> | ip-type: ipv4v6
> | profile-id: 7
> | apn: orange
> | ip-type: ipv4v6
>
>
>
> -----------------------------------
> General | path: /org/freedesktop/ModemManager1/Modem/0
> | device id: 37e0930164608da53fbc790bef627b3395b1ac10
> -----------------------------------
> Hardware | manufacturer: QUALCOMM INCORPORATED
> | model: QUECTEL Mobile Broadband Module
> | firmware revision: EG25GGBR07A08M2G
> | carrier config: ROW_Generic_3GPP
> | carrier config revision: 0501081F
> | h/w revision: 10000
> | supported: gsm-umts, lte
> | current: gsm-umts, lte
> | equipment id: <imei removed for privacy>
> -----------------------------------
> System | device: /sys/devices/platform/soc/1c1b000.usb/usb2/2-1
> | drivers: qmi_wwan, option
> | plugin: quectel
> | primary port: cdc-wdm0
> | ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps),
> | ttyUSB2 (at), ttyUSB3 (at), wwan0 (net)
> -----------------------------------
> Status | lock: sim-pin2
> | unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
> | state: [32mconnected [0m
> | power state: on
> | access tech: lte
> | signal quality: 44% (recent)
> -----------------------------------
> Modes | supported: allowed: 2g; preferred: none
> | allowed: 3g; preferred: none
> | allowed: 4g; preferred: none
> | allowed: 2g, 3g; preferred: 3g
> | allowed: 2g, 3g; preferred: 2g
> | allowed: 2g, 4g; preferred: 4g
> | allowed: 2g, 4g; preferred: 2g
> | allowed: 3g, 4g; preferred: 4g
> | allowed: 3g, 4g; preferred: 3g
> | allowed: 2g, 3g, 4g; preferred: 4g
> | allowed: 2g, 3g, 4g; preferred: 3g
> | allowed: 2g, 3g, 4g; preferred: 2g
> | current: allowed: 2g, 3g, 4g; preferred: 4g
> -----------------------------------
> Bands | supported: egsm, dcs, pcs, g850, utran-1, utran-4, utran-6, utran-5,
> | utran-8, utran-2, eutran-1, eutran-2, eutran-3, eutran-4, eutran-5,
> | eutran-7, eutran-8, eutran-12, eutran-13, eutran-18, eutran-19,
> | eutran-20, eutran-25, eutran-26, eutran-28, eutran-38, eutran-39,
> | eutran-40, eutran-41, utran-19
> | current: egsm, dcs, pcs, g850, utran-1, utran-4, utran-6, utran-5,
> | utran-8, utran-2, eutran-1, eutran-2, eutran-3, eutran-4, eutran-5,
> | eutran-7, eutran-8, eutran-12, eutran-13, eutran-18, eutran-19,
> | eutran-20, eutran-25, eutran-26, eutran-28, eutran-38, eutran-39,
> | eutran-40, eutran-41, utran-19
> -----------------------------------
> IP | supported: ipv4, ipv6, ipv4v6
> -----------------------------------
> 3GPP | imei:
> | enabled locks: sim, fixed-dialing
> | operator id: 20801
> | operator name: Orange F
> | registration: home
> -----------------------------------
> 3GPP EPS | ue mode of operation: csps-2
> | initial bearer path: /org/freedesktop/ModemManager1/Bearer/0
> | initial bearer ip type: ipv4v6
> -----------------------------------
> SIM | primary sim path: /org/freedesktop/ModemManager1/SIM/0
> -----------------------------------
> Bearer | paths: /org/freedesktop/ModemManager1/Bearer/1
>
>
I see the modem reporting "connected" state; is it that the APN
connection is setup, but there is no data traffic going through?
Could you get the connected bearer details with "mmcli -b 1"?
--
Aleksander
https://aleksander.es
More information about the ModemManager-devel
mailing list